IPSU-GP030-6 Sensata

IPSU Series Industrial Pressure Transducer - Ceramic Piezo-resistive thick film ceramic sensor Stainless steel body Accuracy <0.25% FS BFSL Various outputs including mV, Volts and mA. Pressure ranges from vacuum to +5800psi (Custom ranges available on request) The IPSU series is suitable for use in a wide range of industrial applications. The probe uses a piezo-resistive ceramic sensor, giving excellent media compatibility within a stainless steel housing The electronics incorporate a microprocessor based amplifier, requiring no adjusting and giving stable electronics, especially for industrial applications. Each device is temperature compensated, calibrated and supplied with a traceable serial number and calibration data* Performance Electrical Protection Supply reverse polarity No damage/no function Accuracy (Non-Linearity & Hysteresis) <0.25% / FS (BFSL) Setting Errors (offsets) 2-wire Zero & Full Scale, <0.5% / FS Electromagnetic compatibility CE Compliant 3-wire Zero & Full Scale, <0.5% / FS 4-wire Zero & Full Scale, <0.5% / FS 10 Volts Material Specifications Mechanical Stability Housing 303 Stainless Steel Shock 100g / 11s O ring seals Viton Vibration 10g RMS (20 - 2000Hz) Temperatures & Thermal Effects Diaphragm Ceramic Al O 96% 2 3 Media Temperature -40C to +135C Media wetted parts Housing & connection, O ring seal, Ambient Temperature -20C to +80C diaphragm Storage temperature -40C to +125C Weight Approx 3.5oz (100g) Compensated temperature range +20C to +80C Installation position Any 6 Thermal Zero Shift (TZS) <0.04% /FS/C Operational Life > 100x 10 cycles Thermal Span Shift <0.015% /C Insulation resistance > 50MOhms at 50Vdc Pressure Ranges and Passive mV/V Outputs Nominal Pressure, Gauge, psi 15 30 75 150 300 750 1500 3750 6000 Compound range psi -15 to 0 -15 to 30 -15 to 75 -15 to 125 -15 to 285 -15 to 360 Permissible Overpressure psi 30 60 150 300 600 1500 3000 6000 9750 Burst Pressure psi 60 75 180 375 750 1800 3750 7500 9750 Output Signals and Supply Voltages Wire system Output Supply Voltage Connection Pin Nos 2-wire 4-20mA 9-32Vdc +ve Supply Pin 1 -ve Supply Pin 2 Ground Earth Pin 3-wire 0-5Vdc 9-32Vdc +ve Supply Pin 1 -ve Supply Pin 2 +ve Output Pin 3 Ground Earth Pin 4-wire (amplified) 10mV/V (ratiometric) 3-12Vdc +ve Supply Pin 1 -ve Supply Pin 2 +ve Output Pin 3 -ve Output Earth Pin *Calibration data is supplied as a sticker affixed to the product packaging - do not discard Cynergy3 Components Ltd. 7 Cobham Road, Ferndown Industrial Estate, Wimborne, Dorset, BH21 7PE, United Kingdom Telephone: +44 (0)1202 897969 Email: c3w sales sensata.com ISO9001C E R T I F I ED Made in the UK www.cynergy3.com cynergy3-ipsu-v2 2020 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited.IPSU Series Industrial Pressure Sensor - Ceramic Part Number Range Output Part Number Range Output IPSU-GP015-3 0-15 psi G 0-100mV IPSU-G1000-3 0-1bar G (0-14.5psi) 0-100mV IPSU-GP015-5 0-15 psi G 4-20mA IPSU-G1000-5 0-1bar G (0-14.5psi) 4-20mA IPSU-GP015-6 0-15 psi G 0-5V IPSU-G1000-6 0-1bar G (0-14.5psi) 0-5V IPSU-GP030-3 0-30 psi G 0-100mV IPSU-G6000-3 0-6bar G (0-87psi) 0-100mV IPSU-GP030-5 0-30 psi G 4-20mA IPSU-G6000-5 0-6bar G (0-87psi) 4-20mA IPSU-GP030-6 0-30 psi G 0-5V IPSU-G6000-6 0-6bar G (0-87psi) 0-5V IPSU-C0446-5 -14.5 to +150 psi G 4 - 20mA IPSU-GM1P9-5 -1 to +9 Bar G 4 - 20mA IPSU-C0446-6 -14.5 to +150 psi G 0-5V IPSU-GM1P9-6 -1 to +9 Bar G 0-5V IPSU-G1002-3 0-10bar G (0-145psi) 0-100mV IPSU-GP075-3 0-75 psi G 0-100mV IPSU-GP075-5 0-75 psi G 4-20mA IPSU-G1002-5 0-10bar G (0-145psi) 4-20mA IPSU-GP075-6 0-75 psi G 0-5V IPSU-G1002-6 0-10bar G (0-145psi) 0-5V IPSU-GP100-3 0-100 psi G 0-100mV IPSU-G1602-3 0-16bar G (0-232psi) 0-100mV IPSU-GP100-5 0-100 psi G 4-20mA IPSU-G1602-5 0-16bar G (0-232psi) 4-20mA IPSU-GP100-6 0-100 psi G 0-5V IPSU-G1602-6 0-16bar G (0-232psi) 0-5V IPSU-C0447-5 -14.5 to +350 psi G 4-20mA IPSU-C0184-5 -1 to +24bar G 4-20mA IPSU-C0447-6 -14.5 to +350 psi G 0-5V IPSU-C0184-6 -1 to +24bar G 0-5V IPSU-GP150-3 0-150 psi G 0-100mV IPSU-G2502-3 0-25bar G (0-363psi) 0-100mV IPSU-GP150-5 0-150 psi G 4-20mA IPSU-G2502-5 0-25bar G (0-363psi) 4-20mA IPSU-GP150-6 0-150 psi G 0-5V IPSU-G2502-6 0-25bar G (0-363psi) 0-5V IPSU-GP300-3 0-300 psi G 0-100mV IPSU-G4002-3 0-40bar G (0-580psi) 0-100mV IPSU-GP300-5 0-300 psi G 4-20mA IPSU-G4002-5 0-40bar G (0-580psi) 4-20mA IPSU-GP300-6 0-300 psi G 0-5V IPSU-G4002-6 0-40bar G (0-580psi) 0-5V IPSU-GP750-3 0-750 psi G 0-100mV IPSU-G1003-3 0-100bar G (0-1405psi) 0-100mV IPSU-GP750-5 0-750 psi G 4-20mA IPSU-G1003-5 0-100bar G (0-1405psi) 4-20mA IPSU-GP750-6 0-750 psi G 0-5V IPSU-G1003-6 0-100bar G (0-1405psi) 0-5V IPSU-GP1K5-3 0-1500 psi G 0-100mV IPSU-G2503-3 0-250bar G (0-3626psi 0-100mV IPSU-GP1K5-5 0-1500 psi G 4-20mA IPSU-G2503-5 0-250bar G (0-3626psi 4-20mA IPSU-GP1K5-6 0-1500 psi G 0-5V IPSU-G2503-6 0-250bar G (0-3626psi 0-5V IPSU-G4003-3 0-400bar G (0-5802psi) 0-100mV IPSU-GP3K6-3 0-3600 psi G 0-100mV IPSU-GP3K6-5 0-3600 psi G 4-20mA IPSU-G4003-5 0-400bar G (0-5802psi) 4-20mA IPSU-GP3K6-6 0-3600 psi G 0-5V IPSU-G4003-6 0-400bar G (0-5802psi) 0-5V IPSU-GP5K8-3 0-5800 psi G 0-100mV (Custom ranges and outputs available on request) IPSU-GP5K8-5 0-5800 psi G 4-20mA IPSU-GP5K8-6 0-5800 psi G 0-5V Mechanical Dimensions PG7 cable entry gland 4 pin DIN 43650 Form C connector 0.945 (24mm) 18mm (0.71 ) AF Hex 0.465 (11.8mm) 1/4 NPT male thread www.cynergy3.com ISO9001C ER TI FI ED 2020 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited. 2 (50mm) Nominal 3.19 (81mm) Nominal