LM WRAS Approved Series This is suitable for use in water, industrial wastewater and sewage, that can have wide variations of temperature. This small design of switch is for use in more confined spaces, where there is not enough room for the larger FFSMC type. The rounded body design and floating attitude prevents accumulation of solids on the body. The switch has additional internal ballast, to bring the centre of gravity and rotation close to the cable entry point. The switching element is a self cleaning type, that makes the complete switch insensitive to humidity and condensation, allowing this type to operate in widely fluctuating temperatures. The switch contacts are rated at 10 Amp resistive. Supplied, as standard, with 5 metres cable and adjustable counterweight. Technical Specifications LM10AWWLM10B LM10CW Contact Form N/O N/C C/O Material High Density Polyethylene Temp Range C 0 / +55 (WRAS approved up to +23C) F + 32 / +131 For smaller tanks and Cable (standard length 5m) With protective earth no earth restricted space Standard cable covering WRC Approved Max. working pressure 10 bar Use in sewer and Electrical Specifications industrial waste Power Rating Max AC : 750 VA DC : 180W water Switching Voltage Max AC : 250 V DC : 110 V Switching Current Max. Resistive 10 A Shape avoids Switching Current Max. Inductive AC : 4A DC : 1 A ragging, in sewer systems It is necessary to use an auxiliary relay, when switching pump motors or any loads that are not purely resistive. Unaffected by suspended solids Operates in Turbulent 47 Fluids Off - On Differential Cynergy3 Components Ltd On - Off 7 Cobham Road 129 Ferndown Industrial Estate Wimborne Dorset BH21 7PE Tel: +44 (0) 1202 897969 Minimum Cable Pivot 75 length 120mm sales cynergy3.com ISO 9001CERTIFIED www.cynergy3.com 2014 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited. 15 15LM WRAS Approved Series Part Numbering System LM 10 A W 10 Cable length in mtrs: Series Blank = 5M standard Max. current Cable covering: Contact Form W = WRC Approved A = n/o B = n/c C = c/o Installation cable entrance cable differential external tie counterweight pipe wiring diagram wiring diagram for filling pump for emptying pump brown brown black blue brown brown blue black pump - off pump - on level drop level drop pump - off pump - on CERTIFIED ISO 9001 www.cynergy3.com 2014 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited.