LVD75C60 Sensata

Panel Mount DataSheet LVD Series Low Voltage Disconnect Output Ratings from 40A to100A 3-75 VDC Low On-State Resistance FET Output Six DC control Ranges Available for 12 & 24VDC Battery Systems Compact Encapsulated Panel Mount Package PRODUCT SELECTION Control Voltage 40 A 60 A 80 A 100 A 11.0-11.5 VDC LVD75A40 LVD75A60 LVD75A80 LVD75A100 11.5-12.0 VDC LVD75B40 LVD75B60 LVD75B80 LVD75B100 LVD75C60 LVD75C80 LVD75C100 12.0-12.5 VDC LVD75C40 23.0-24.0 VDC LVD75D40 LVD75D60 LVD75D80 LVD75D100 24.0-25.0 VDC LVD75E40 LVD75E60 LVD75E80 LVD75E100 25.6-26.6 VDC LVD75F40 LVD75F60 LVD75F80 LVD75F100 Output Current AVAILABLE OPTIONS 40: 40 Amp 60: 60 Amp 80: 80 Amp Max DC Output Voltage 100: 100 Amp Optional 75: 3-75 Vdc H: Thermal Pad Series 75 LVD A 40 H Input Control Voltage Code: A: 11.0-11.5Vdc Hysteresis B: 11.5-12.0Vdc Hysteresis C: 12.0-12.5Vdc Hysteresis D: 23.0-24.0Vdc Hysteresis E: 24.0-25.0Vdc Hysteresis F: 25.6-26.6Vdc Hysteresis Required for valid part number For options only and not required for valid part number (1) OUTPUT SPECIFICATIONS Description 40A 60A 80A 100A Operating Voltage Vdc 3-75 3-75 3-75 3-75 Maximum Load Current Adc (2) 40 60 80 100 Minimum Load Current mAdc 5 5 5 5 120 180 220 250 Maximum Surge Current (10msec) Adc Maximum On-State Voltage Drop Rated Current Vdc 0.6 0.6 0.64 0.5 1.2 1.0 0.5 0.4 Thermal Resistance Junction to Case (Rjc) C/W 15 10 8 5 Max On-state Resistance rated current (Rds-on) mOhms Maximum Off-State Leakage Current Rated Voltage mA 0.5 0.5 0.5 0.5 (1) INPUT SPECIFICATIONS Description LVD75Cxx LVD75Dxx LVD75Exx LVD75Fxx LVD75Axx LVD75Bxx Must Turn-On Voltage Vdc (3) 11.5 12 12.5 24 25 26.6 Must Turn-Off Voltage Vdc (3) 12 23 24 25.6 11 11.5 Maximum Allowed input Voltage Vdc 36 36 36 36 36 36 12 12 12 12 Maximum Input Current mAdc 12 12 Maximum Turn-On Time msec 150 150 150 150 150 150 150 150 Maximum Turn-Off Time msec 150 150 150 150 Do not forget to visit us at: www.crydom.com Copyright 2017 Crydom Inc. Specifications subject to change without notice.0.5 C/W 0.5 C/W 1 C/W 1 C/W 2 C/W 2 C/W 3 C/W 3 C/W No Heatsink No Heatsink Panel Mount DataSheet GENERAL SPECIFICATIONS Description Parameters Dielectric Strength, Input/Output to Baseplate (60Hz) (4) 2500 Vrms 9 Minimum Insulation Resistance ( 500 VDC) 10 Ohm Maximum Capacitance, Input/Output 50 pF Ambient Operating Temperature Range -30C to 80C Ambient Storage Temperature Range -40C to 125C Weight (typical) 3.5 oz. (100g) Terminals Hardware Furnished, mounted Input Terminal Screw Torque Range: 8-10 in lb (0.9-1.1Nm) Output Terminal Screw Torque Range: 18-20 in lb (2-2.2Nm) GENERAL NOTES (1) All parameters at 25C unless otherwise specied. (2) Heat Sinking required, see derating curves. (3) Tolerance + 0.15Vdc (4) All four terminals shorted together during test. WIRING DIAGRAM Basic Wiring Diagram Typical LVD Connection Diagram + +VDC L L BATTERY 1- 1- +2 +2 O O * * A A D D 4- +3 4- +3 DC Input NOTE: When wired as above the maximum * Load should be diode suppressed voltage is limited to 36 VDC. to prevent damage to SSR THERMAL DERATE INFORMATION 60 Amps 40 Amps 20 40 60 20 40 60 80 0 0 10 20 30 40 50 60 70 80 LOAD CURRENT (AMPS) AMBIENT TEMPERATURE (C) LOAD CURRENT (AMPS) AMBIENT TEMPERATURE (C) Do not forget to visit us at: www.crydom.com Copyright 2017 Crydom Inc. Specifications subject to change without notice.