PSD2490 Sensata

Panel Mount DataSheet PS24 Series Peak-fire SSR for high inductance applications Ratings from 10 A to 90 A 90-280 VAC SCR output for heavy industrial loads DC control PRODUCT SELECTION 10 A 25 A 90 A Control Voltage 50 A 3-32 VDC PSD2410 PSD2425 PSD2450 PSD2490 AVAILABLE OPTIONS Blank: No Faston Terminals Operating Voltage F: Faston Terminals 24: 90-280 VAC Series D 24 10 G PS F Load Current Status indicator 10: 10 Amps Control Voltage Blank: No Input Status LED 25: 12 Amps G: Input Status LED D: DC (3-32 V) 50: 18 Amps 90: 90 Amps Required for valid part number For options only and not required for valid part number OUTPUT SPECIFICATIONS (1) Description 10 A 25 A 50 A 90 A Operating Voltage (47-63Hz) Vrms 90-280 90-280 90-280 90-280 Transient Overvoltage Vpk 600 600 600 600 Maximum Off-State Leakage Current Rated Voltage mArms 10 10 10 10 500 500 500 500 Minimum Off-State dv/dt Maximum Rated Voltage V/sec (2) Maximum Load Current (3) Arms 10 25 50 90 40m 40 40 40 Minimum Load Current mArms 115/120 239/250 597/625 1145/1200 Maximum 1 Cycle Surge Current (50/60Hz) Apk 1.6 1.6 1.6 1.6 Maximum On-State Voltage Drop Rated Current Vpk 1.48 1.02 0.63 0.28 Thermal Resistance Junction to Case (Rjc) C/W 66/60 285/259 1779/1621 6560/5976 Maximum 1/2 Cycle It for Fusing (50/60 Hz) A sec Minimum Power Factor (with Maximum Load) 0.5 0.5 0.5 0.5 Do not forget to visit us at: www.crydom.com Copyright 2017 Crydom Inc. Specifications subject to change without notice.Panel Mount DataSheet INPUT SPECIFICATIONS (1) Description DC Control Control Voltage Range 3-32 VDC Maximum Turn-On Voltage 3.0 VDC Minimum Turn-Off Voltage 1.0 VDC Maximum Reverse Voltage -32 Typical Input Current 2 mA (4) Nominal Input Impedance See Note 4 Maximum Turn-On Time msec 1/2 Cycle Maximum Turn-Off Time msec 1/2 Cycle GENERAL SPECIFICATIONS Description Parameters Dielectric Strength, Input/Output (50/60Hz) (3) 4000 Vrms 9 Minimum Insulation Resistance ( 500 VDC) 10 Ohm Maximum Capacitance, Input/Output 8 pF Ambient Operating Temperature Range -40 to 80C Ambient Storage Temperature Range -40 to 125 C Weight (typical) 3.0 oz (86.5 g) Encapsulation Thermally Conductive Epoxy Terminals Screw and saddle Clamps Furnished, Unmounted Recommended Terminal Screw Torque Range: 6-32 Screws - 10 in/lbs. 8-32 & 10-32 Screws - 20 in. lbs. Fastons: Single pair (up to 25 A) Double pair* (50 A model only) *Caution: User must connect to both pairs GENERAL NOTES (1) All parameters at 25C unless otherwise specied. (2) Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 (3) Heat sinking required, for derating curves see page 3. (4) Input circuit incorporates active current limiter Do not forget to visit us at: www.crydom.com Copyright 2017 Crydom Inc. Specifications subject to change without notice.