SPF480D25R Sensata

PCB Mount DataSheet SPF Series SIP SSR Ratings to 25A (forced air) 480VAC SCR output for heavy industrial loads AC or DC control Zero turn-on (resistive loads) or instantaneous turn-on (inductive loads) output PRODUCT SELECTION Control Voltage 25A 25A 25A 3-15 VDC SPF240D25 4-15 VDC SPF380D25 SPF480D25 15-32 VDC SPFE240D25 SPFE480D25 18-36 VAC SPFE240A25 90-140 VAC SPF240A25 AVAILABLE OPTIONS Load Voltage 240: 12-280 VAC Operation Current 380: 48-530 VAC 25: 25 Amps Series 480: 48-660 VAC R SPF E 240 D 25 Control Voltage Control Input Type Switching Type Blank: 3-15 VDC (for 240) D: DC Input Blank: Zero Voltage Turn-On 4-15 VDC(for 380 /480) A: AC Input R: Instantaneous Turn-On Required for valid part number E: 15-32 VDC (for 240 / 480) For options only and not required for valid part number 18-36 VAC (for 240 Only ) (1) OUTPUT SPECIFICATIONS SPF(E)240 SPF380 SPF(E)480 Description Operating Voltage (47-63Hz) Vrms 12-280 48-530 48-660 Transient Overvoltage Vpk 600 1200 1200 Maximum Off-State Leakage Current Rated Voltage mArms 0.1 0.1 0.1 Minimum Off-State dv/dt Maximum Rated Voltage V/sec) (2) 500 500 500 Maximum Load Current (Convection Air) Arms (3) 10 10 10 Minimum Load Current (Forced air) mArms (3) 25 25 25 Minimum Load Current mArms 0.06 0.06 0.06 Maximum Surge Current (16.6msec) Apk 250 250 250 Maximum On-State Voltage Drop Rated Current Vpk 1.6 1.6 1.6 Maximum I t for Fusing (8.3msec) A sec 260 260 260 Minimum Power Factor (at Maximum load) 0.5 0.5 0.5 (1) INPUT SPECIFICATIONS Description SPF240D25 SPF380D/480D SPFExxxD25 SPF240A25 SPFE240A25 Control Voltage Range 3-15 VDC 4-15 VDC 15-32 VDC 90-140 VAC 18-36 VAC Maximum Turn-On Voltage 3.0 VDC 4.0 VDC 15 VDC 90 Vrms 18 Vrms Minimum Turn-Off Voltage 1.0 VDC 1.0 VDC 1.0 VDC 10 Vrms 2 Vrms Typical Input Current Nominal Voltage 15 mA 15 mA 15 mA 10 mA 10 mA Nominal Input Impedance 300 Ohm 240 Ohm 1500 Ohm 14.1 k Ohm 2.1 k Ohm Maximum Turn-On Time msec (4) 1/2 Cycle 1/2 Cycle 1/2 Cycle 10 10 Maximum Turn-Off Time msec 1/2 Cycle 1/2 Cycle 1/2 Cycle 40 40 Do not forget to visit us at: www.crydom.com Copyright 2017 Crydom Inc. Specifications subject to change without notice.PCB Mount DataSheet (1) GENERAL SPECIFICATIONS Description Parameters Dielectric Strength, Input/Output (50/60Hz) 4000 Vrms 9 Minimum Insulation Resistance ( 500 VDC) 10 Ohms Maximum Capacitance, Input/Output 8 pF Ambient Operating Temperature Range -30 to 80 C Ambient Storage Temperature Range -30 to 125 C Weight (typical) 0.85 oz (25 g) Encapsulation Thermally conductive Epoxy GENERAL NOTES (1) All parameters at 25C unless otherwise specied. (2) Off-state dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 (3) Heatsink temperature 85C Maximum (4) Turn-On Time for Instantaneous Turn-on versions 0.1 msec (DC Control Models) WIRING DIAGRAM DC Control A LOAD VAC 1 Load can be wired in position A or B LOAD VAC 2V TRIGGER B CIRCUIT +VDC 3 -VDC 4 AC Control A LOAD VAC 1 Load can be wired in position A or B LOAD VAC 2V TRIGGER B CIRCUIT VAC 3 AC/DC Converter VAC 4 Do not forget to visit us at: www.crydom.com Copyright 2017 Crydom Inc. Specifications subject to change without notice.