TD2420Q Sensata

Panel Mount DataSheet Quad Series 4 Independent Relays in one package Industry standard package SCR output for heavy industrial loads DC Control Zero Voltage Turn-on (resistive loads) or Instantaneous Turn-on (inductive loads) output PRODUCT SELECTION Control Voltage 20 A 4-15 VDC TD2420Q 15-28 VDC TD2420QE AVAILABLE OPTIONS Thermal Pad Blank: Not Included Series H: Included TD2420Q E H -10 Operating Voltage Switching Type Blank: 4-15 VDC Blank: Zero Voltage Turn-On E: 15-28 VDC -10: Instantaneous Turn-On Required for valid part number For options only and not required for valid part number (1) OUTPUT SPECIFICATIONS Description 20 A Operating Voltage Range (47-63Hz) Vrms 24-280 Transient Overvoltage Vpk 550 Maximum Off-State Leakage Current Rated Voltage mA 10 Minimum Off-State dv/dt Maximum Rated Voltage V/sec (2) 200 Maximum Load Current Arms (3) 20 Minimum Load Current Arms 0.15 Maximum 1 Cycle Surge Current (50/60Hz) Apk 285/259 Maximum On-State Voltage Drop Rated Current Vpk 1.6 Maximum 1/2 Cycle I t for Fusing (50/60) A sec 285/259 Thermal Resistance Junction to Case (Rjc) (C /W 1.2 Minimum Power Factor (with Maximum Load) 0.5 Do not forget to visit us at: www.crydom.com Copyright 2019 Crydom Inc. Specifications subject to change without notice.Panel Mount DataSheet (1) INPUT SPECIFICATIONS Description TD2420Q TD2420QE Control Voltage Range 4-15 VDC 15-28 VDC Must Turn On Voltage 4.0 VDC 15 VDC Must Turn Off Voltage 1.0 VDC 1 VDC Typical Input Current 12 mA 5 VDC 15 mA 24 VDC Nominal Input Impedance 330 Ohm 1500 Ohm Maximum Turn-on Time msec (4) 1/2 Cycle 1/2 Cycle Maximum Turn-Off Time msec 1/2 Cycle 1/2 Cycle (1) GENERAL SPECIFICATIONS Description Parameters Dielectric Strength, Input/Output/Base (50/60Hz) 2500 Vrms 9 10 Ohm Minimum Insulation Resistance ( 500 VDC) Maximum Capacitance, Input/Output 10 pF Ambient Operating Temperature Range -40 to 80 C Ambient Storage Temperature Range -40 to 125 C Weight (typical) 3.5 oz. (109 gr) Encapsulation Thermally Conductive Epoxy Terminals .25 Fastons, .025 Square Pins GENERAL NOTES (1) All parameters at 25C and per section unless otherwise specied. (2) Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 (3) Heat sinking required, max. 20 A per section, max. 60 A per package. (4) Turn-on time for Instantaneous turn-on versions is 0.1 msec. MECHANICAL SPECIFICATIONS Tolerances: 0.02 in / 0.5 mm All dimensions are in: inches millimeters .250 X .032 FASTON MOUNTING HOLE/SLOT TERMINAL 0.192 (4.9) DIA025 SQ. PINS (8 PLACES) 2 PLCS ON .100 CENTERS 1.12 A1 A2 C1 C2 120/240 V - 20 A 120/240V - 20A 28.7 -DC SECTION C -DC SECTION A 1.87 2.30 1.60 +DC COMMON 47.5 58.4 40.6 -DC SECTION B -DC SECTION D 120/240V - 20A 120/240V - 20A B1 B2 D1 D2 3.75 0.85 0.77 9.5 21.6 19.6 1.37 34.8 1.80 45.7 Do not forget to visit us at: www.crydom.com Copyright 2019 Crydom Inc. Specifications subject to change without notice.