EK-P3 Sensirion

Datasheet Evaluation Kit EK-P3 For SDP600 series differential pressure Sensors Evaluation Kit Applicable to SDP5xx/6xx/7xx sensors Viewer Software for download Easy connection via USB Interface Product Summary With this equipment, first measurements can be done The evaluation kit EK-P3 contains everything needed for within a couple of minutes. fast evaluation and qualification of the SDP600 series The viewer software can be downloaded from the differential pressure sensors. It contains a USB dongle, a Sensirion web page and includes some simple data- SDP610 differential pressure sensor and an adapter cable logger features. to connect the sensor to the USB-dongle. Set Up of EK-P3 Figure 2 Pin assignment of SDP6xx on PCB top view from left to right. Connect cable such that yellow cable is connected to data, black (GND), red (Vdd) and green (clock). WARNING: Reverse polarity connection might damage sensor permanently. Figure 1 Schematic of Evaluation Kit EK-P3. USB Dongle with I2C to USB converter. SDP6xx sensor is connected via plug to Step 3: Start software. Please note that the USB stick, this USB dongle. Viewer software must be downloaded from the sensor cable and sensor must be connected to the Sensirion web page. computer before starting the software. Please choose SDP6xx series and press OK button. Material Contents 2 1 EK-P3 USB Stick: Contains USB to I C translator capabilities. 1 Sensor cable of 20 cm length with plug for connecting sensors with USB dongle. 1 SDP610 sensor: Digital Sensor with I2C output. Please refer to datasheet for the SDP600 series for more details: Datasheet EK-P3 may be displayed as linearized or raw data. The data can measurement may be started. Choose the type of be logged, stored and exported to Excel format. measurement, the resolution and sampling time and press the run button. The software has a simple data logger feature which saves data as csv-file. Device Certification The Evaluation Kit EK-P3 is RoHS and WEEE compliant. Ordering Information Use the part names and item numbers shown in the following table when ordering the EK-P3 evaluation kit. For the latest product information and local distributors, visit www.sensirion.com. Part name Description / Output Item number EK-P3 SDP600 series evaluation kit 1-100766-01 When starting the viewer software, the right sensor must be selected in a first window (please select SDP 600 series). The settings must be chosen and then the Revision History Date Version Page(s) Author Changes August 2010 1.0 1 3 DAT Initial release December 2010 1.1 2 DAT New Link to Software www.sensirion.com Version 1.1 December 2010 2/3