GP1A52LRJ00F Sharp

GP1A52LRJ00F Gap : 3mm, Slit : 0.5mm GP1A52LRJ00F *OPIC Output Case package Transmissive Photointerrupter Description Agency approvals/Compliance GP1A52LRJ00F is a standard, OPIC output, transmis- 1. Compliant with RoHS directive sive photointerrupter with opposing emitter and detector in a case, providing non-contact sensing. For this fam- Applications ily of devices, the emitter and detector are inserted in a 1. General purpose detection of object presence or mo- case, resulting in a through-hole design. tion. 2. Example : Printer, FAX, Optical storage unit Features 1. Transmissive with OPIC output 2. Highlights : Vertical Slit for alternate motion detection Output High Level at intercepting optical path 3. Key Parameters : Gap Width : 3mm Slit Width (detector side) : 0.5mm Package : 12.2105mm 4. RoHS directive compliant *OPI(Optical IC) is a trademark of the SHARP Corporation. An OPIC consists of a light-detecting element and a signal- processing Notice The content of data sheet is subject to change without prior notice. In the absence of con rmation by device speci cation sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device speci cation sheets before using any SHARP device. Sheet No.: D3-A04101FEN 1 Date Oct. 3. 2005 SHARP CorporationGP1A52LRJ00F Internal Connection Diagram Top view Voltage regulator 3 2 1 Anode (15k) 2 Cathode 4 3 V CC 4 V O 5 GND Amp 5 1 Outline Dimensions (Unit : mm) Top view 0.3 12.2 +0.2 3 0.1 Sharp mark S A-A B-B section section C1 B 0.5 A 0.5 D Date Model code code B A +0.3 50.4 0.1 +0.3 40.45 0.1 (1.5) (9.2) (1.27) (1.27) 5 1 4 3 2 Unspeci ed tolerance shall be as follows Dimensions(d) Tolerance d6 0.1 6<d18 0.2 ( ) : Reference dimensions Product mass : approx. 0.52g Dip soldering material : Sn 3Ag0.5Cu Sheet No.: D3-A04101FEN 2 MIN. 9 3.5 10 2.5 7.5 5 2.5 (Detctor center) 1.5 A52