GP1S56TJ000F Gap : 2mm, Slit : 0.15mm GP1S56TJ000F Phototransistor Output, Case package Transmissive Photointerrupter Description Agency approvals/Compliance GP1S56TJ000F is a standard, phototransistor output, 1. Compliant with RoHS directive transmissive photointerrupter with opposing emitter and detector in a case, providing non-contact sensing. For Applications this family of devices, the emitter and detector are insert- 1. General purpose detection of object presence or mo- ed in a case, resulting in a through-hole design. tion. This device is unique because it uses position pins 2. Example : Printer, FAX, Optical storage unit to insure accurate placement on the PCB, and has the short pro le. Features 1. Transmissive with phototransistor output 2. Highlights : Vertical Slit for alternate motion detection Positioning Pin to prevent misalignment High resolution (Slit width : 0.15 mm) 3. Key Parameters : Gap Width : 2mm Slit Width (detector side): 0.15mm Package : 117.55mm 4. RoHS directive compliant Notice The content of data sheet is subject to change without prior notice. In the absence of con rmation by device speci cation sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device speci cation sheets before using any SHARP device. Sheet No.: D3-A02701FEN 1 Date Oct. 3. 2005 SHARP Corporation56 C1 GP1S56TJ000F Internal Connection Diagram Top view 3 2 1 Anode Cathode 2 3 Collector 4 1 Emitter 4 (Unit : mm) Outline Dimensions Top view Date Model No. code SHARP mark B-B section A-A section 0.07 11 0.15 0.07 +0.3 C1 0.15 2 0 B A B +0.3 A 4 0.45 0.1 +0.3 4 0.4 0.1 ( ) 7.4 ( ) 2.54 0.05 0.15 10.2 2 0.7 4 1 3 2 Unspeci ed tolerance shall be as follows Dimensions (d) Tolerance d6 0.1 6 d 18 0.2 < ( ) : Reference dimensions Product mass : approx. 0.38g Dip soldering material : Sn 3Ag0.5Cu Sheet No.: D2-A02701FEN 2 (5.5) Detector center 2 2 0.7 MIN. MAX. 5 12 7.5 S