PC2SD11NTZ Series V : 400V DRM PC2SD11NTZ Non-zero cross type DIP 6pin Series Phototriac Coupler for triggering V : 600V type is also available. DRM (PC3SD11NTZ Series) Description Agency approvals/Compliance PC2SD11NTZ Series Phototriac Coupler include an 1. Recognized by UL1577 (Double protection isolation), infrared emitting diode (IRED) optically coupled to an file No. E64380 (as model No. 2SD11) output Phototriac. 2. Approved by CSA, file No. CA95323 (as model No. These devices feature full wave control and are 2SD11) ideal isolated drivers for medium to high current Triacs. 3. Package resin : UL flammability grade (94V-0) DIP package provides 5.0kV isolation from input to output with superior commutative noise immunity. Applications 1. Triggering for Triacs used to switch on and off Features devices which require AC Loads. 1. High repetitive peak off-state voltage (V : 400V) DRM For example heaters, fans, motors, solenoids, and 2. Non-zero crossing functionality valves. 3. 6 pin DIP package 2. Triggering for Triacs used for implementing phase 4. Superior noise immunity (dV/dt : MIN. 1 000V/s) control in applications such as lighting control and 5. Lead-free components are also available (see Model temperature control (HVAC). Line-up section in this datasheet) 3. AC line control in power supply applications. 6. Double transfer mold construction (Ideal for Flow Soldering) 7. High isolation voltage between input and output (V (rms) : 5.0kV) iso Notice The content of data sheet is subject to change without prior notice. In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. Sheet No.: D2-A07401EN 1 Date Mar. 31. 2004 SHARP CorporationPC2SD11NTZ Series Internal Connection Diagram 1 Anode 1 6 2 Cathode 3 NC 2 5 4 Anode/Cathode 5 No external connection 3 4 6 Cathode/Anode (Unit : mm) Outline Dimensions 1. Through-Hole ex. PC2SD11NTZ 2. Wide Through-Hole Lead-Form ex. PC2SD11NVZ 0.3 0.3 1.2 1.2 0.2 0.6 0.2 0.6 6 5 4 Model No. Model No. 6 5 4 SHARP SHARP mark Rank mark mark Rank mark 2SD11 2SD11 Anode Anode mark mark Date code (2 digit) Date code (2 digit) 1 2 3 1 3 2 Factory identification mark Factory identification mark 0.5 0.3 7.12 7.62 0.3 0.5 7.12 7.62 Epoxy resin Epoxy resin 0.1 0.1 0.25 0.5 2.54 0.26 0.5 0.25 10.16 2.54 : 0 to 13 0.1 0.5 Product mass : approx. 0.35g Product mass : approx. 0.35g 3. SMT Gullwing Lead-Form ex. PC2SD11NXP 4. Wide SMT Gullwing Lead-Form ex. PC2SD11NWP 0.3 0.2 1.2 0.6 0.2 0.3 0.6 1.2 6 5 4 6 5 4 Model No. Model No. SHARP SHARP mark mark Rank mark Rank mark 2SD11 2SD11 Anode Anode mark mark Date code (2 digit) Date code (2 digit) 1 2 3 1 2 3 Factory identification mark Factory identification mark 0.5 0.3 0.5 7.12 7.62 7.12 0.3 7.62 Epoxy resin 0.25 0.25 2.54 Epoxy resin +0.4 +0.4 2.54 1.0 1.00 0 +0 10.0 0.5 0.25 0.5 0.25 0.75 10.16 0.75 MAX. 12.0 Product mass : approx. 0.33g Product mass : approx. 0.34g 5 Pin is not allowed external connection Sheet No.: D2-A07401EN 2 0.5 2.9 0.5 0.5 6.5 3.5 0.5 0.5 3.5 6.5 TYP. 0.5 0.1 3.25 0.5 0.26 0.25 0.35 0.5 2.9 0.5 0.5 0.5 0.5 3.5 6.5 3.5 3.25 0.5 0.1 6.5 TYP. 0.26 0.5 MIN. 2.7 0.25 0.25