PC4SD21NTZ Series
V : 800V
DRM
PC4SD21NTZ
Zero cross type
DIP 6pin
Series
Phototriac Coupler for triggering
Non-zero cross type is also available.
(PC4SD11NTZ Series)
Description Agency approvals/Compliance
PC4SD21NTZ Series Phototriac Coupler include an 1. Recognized by UL1577 (Double protection isolation),
infrared emitting diode (IRED) optically coupled to an file No. E64380 (as model No. 4SD21)
output Phototriac. 2. Approved by CSA, file No. CA95323 (as model No.
These devices feature full wave control and are 4SD21)
( )
ideal isolated drivers for medium to high current Triacs. 3. Optionary available VDE Approved (DIN EN
DIP package provides 5.0kV isolation from input to 60747-5-2), file No. 40008189 (as model No.
output with superior commutative noise immunity. 4SD21)
4. Package resin : UL flammability grade (94V-0)
()
DIN EN60747-5-2 : successor standard of DIN VDE0884.
Features
Up to Date codeR(December 2003), approval of DIN
1. High repetitive peak off-state voltage (V : 800V) VDE0884.
DRM
From Date codeS1"(January 2004), approval of DIN
2. Zero crossing functionality (V : MAX. 20V)
OX
EN60747-5-2.
()
3. I ranks available (see Model Line-up section in this Reinforced insulation type is also available.
FT
(PC4SF21YVZ Series)
datasheet)
4. 6 pin DIP package
5. Superior noise immunity (dV/dt : MIN. 500V/s)
Applications
6. Lead-free components are also available (see Model
1. Triggering for Triacs used to switch on and off
Line-up section in this datasheet)
devices which require AC Loads.
7. Double transfer mold construction (Ideal for Flow
For example heaters, fans, motors, solenoids, and
Soldering)
valves.
8. High isolation voltage between input and output
2. AC line control in power supply applications.
(V (rms) : 5.0kV)
iso
Notice The content of data sheet is subject to change without prior notice.
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Sheet No.: D2-A07901EN
1 Date Mar. 31. 2004
SHARP CorporationPC4SD21NTZ Series
Internal Connection Diagram
1
Anode
1
6
2
Cathode
3
NC
2 5
4
Anode/Cathode
5
No external connection
3
4
6
Cathode/Anode
Zero Crossing Circuit
(Unit : mm)
Outline Dimensions
1. Through-Hole [ex. PC4SD21NTZ] 2. Wide Through-Hole Lead-Form [ex. PC4SD21NVZ]
0.3 0.3
1.2 1.2
0.2
0.6
0.2
0.6
6 5 4
Model No.
Model No.
SHARP 6 5 4
SHARP
mark
Rank mark
mark
Rank mark
4SD21
4SD21
Anode
Anode
mark
mark
Date code (2 digit)
Date code (2 digit)
1 2 3
Factory identification mark 1 3
2
Factory identification mark
0.5 0.3
7.12 7.62
0.3
0.5
7.12 7.62
Epoxy resin
Epoxy resin
0.1
0.1
0.25 0.5
0.26
2.54
0.5
0.25
10.16
2.54
0.1
: 0 to 13
0.5
Product mass : approx. 0.35g Product mass : approx. 0.35g
3. SMT Gullwing Lead-Form [ex. PC4SD21NXP] 4. Wide SMT Gullwing Lead-Form [ex. PC4SD21NWP]
0.3 0.2
1.2 0.6
0.2
0.3
0.6
1.2
6 5 4
Model No. 6 5 4
Model No.
SHARP
SHARP
mark
mark
Rank mark
Rank mark
4SD21
4SD21
Anode
Anode
mark
mark
Date code (2 digit) Date code (2 digit)
1 2 3
1 2 3
Factory identification mark
Factory identification mark
0.5 0.3
0.5
7.12
7.62
0.3 7.12
7.62
Epoxy resin
0.25
0.25
2.54 Epoxy resin +0.4 2.54
+0.4
1.0 1.00
0
+0
10.00.5
0.25 0.5 0.25
0.75 10.16 0.75
MAX.
12.0
Product mass : approx. 0.33g Product mass : approx. 0.34g
Sheet No.: D2-A07901EN
2
0.5
2.9
0.5
0.5
6.5
3.5 0.5 0.5
3.5 6.5
TYP.
0.5
0.1
3.25 0.5
0.26
0.25
0.35
0.5
2.9
0.5 0.5
0.5
0.5
3.5 3.5 6.5
3.25
0.5
0.1
6.5
0.26 TYP.
0.5
MIN.
2.7
0.25
0.25