K3010P Vishay

333 3 K3010P, K3011P, K3012P www.vishay.com Vishay Semiconductors Optocoupler, Phototriac Output, Non-Zero Crossing, 250 V DRM FEATURES MT2 400 V blocking voltage A 1 6 Wide range of trigger current 2 5 NC C 100 mA on-state current RMS Wide temperature range -55 C to +100 C 3 4 NC MT1 Material categorization: for definitions of compliance please see 22897-1 www.vishay.com/doc 99912 APPLICATIONS LINKS TO ADDITIONAL RESOURCES Power TRIAC driver Isolated AC load switch 3D Models Design Tools Related Models Footprints Air condition Documents Heaters White goods Schematics Industrial controls Office equipment DESCRIPTION The K301xP series consists of a phototriac optically coupled AGENCY APPROVALS to a gallium arsenide infrared-emitting diode in a 6-lead UL plastic dual inline package. cUL The non-zero crossing functionality enables full wave control. Featuring galvanic and electrical noise isolation, the DIN EN 60747-5-5 (VDE 0884-5) available with option 1 output is able to directly switch AC loads or drive medium to CQC: GB4943-1-2011 high power TRIACs. CQC: GB8898-2011 FIMKO ORDERING INFORMATION DIP-6 K3 0 1 X P PART NUMBER TRIGGER CURRENT 7.62 mm I FT AGENCY CERTIFIED / PACKAGE TRIGGER CURRENT, I FT VDE, cUL, BSI, CQC, FIMKO 5 mA 10 mA 15 mA DIP-6 K3012P K3011P K3010P Note Additional options may be possible, please contact sales office Rev. 2.3, 04-Nov-2020 Document Number: 83504 1 For technical questions, contact: optocoupleranswers vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 DDD D K3010P, K3011P, K3012P www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (T = 25 C, unless otherwise specified) amb PARAMETER TEST CONDITION SYMBOL VALUE UNIT INPUT Reverse voltage V 5V R Forward current I 80 mA F Forward surge current t 10 s I 3A p FSM Power dissipation P 100 mW diss Junction temperature T 100 C j OUTPUT Off state output terminal voltage V 250 V DRM On state RMS current I 100 mA TRM Peak surge current, non-repetitive t 10 ms I 1.5 A p TMS Power dissipation P 300 mW diss Junction temperature T 100 C j COUPLER Total power dissipation P 350 mW tot Storage temperature range T -55 to +150 C stg Ambient temperature range T -55 to +100 C amb Soldering temperature 2 mm from case, t 10 s T 260 C sld Note Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability ELECTRICAL CHARACTERISTICS (T = 25 C, unless otherwise specified) amb PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT INPUT Forward voltage I = 50 mA V - 1.25 1.6 V F F Junction capacitance V = 0, f = 1 MHz C -50 - pF R j OUTPUT Forward peak off-state voltage (1) I = 100 nA V 250 - - V RDM DRM (repetitive) Peak on-state voltage I = 100 mA V -1.5 3 V TM TM dV/d -10 - V/s tcr Critical rate of rise of off-state voltage I = 0, I = 30 mA FT FT dV/d 0.1 0.2 - V/s tcrq (2) COUPLER K3010P I -8 15 mA FT Collector emitter trigger current V = 3 V, R = 150 K3011P I -5 10 mA S L FT K3012P I -2 5 mA FT Holding current I = 10 mA, V 3 V I - 100 - A F S H Notes Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluation. Typical values are for information only and are not part of the testing requirements (1) Test voltage must be applied within dV/dt ratings (2) I is defined as a minimum trigger current FT Rev. 2.3, 04-Nov-2020 Document Number: 83504 2 For technical questions, contact: optocoupleranswers vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000