PR29MF1xNSZ Series/PR39MF1xNSZ Series/PR49MF11NSZ Series I (rms)0.9A, Non-Zero Cross type T PR29MF1xNSZ Series DIP 8pin Triac output SSR PR39MF1xNSZ Series PR49MF11NSZ Series Zero cross type is also available. (PR29MF2xNSZ Series/ PR39MF2xNSZ Series) Description Agency approvals/Compliance PR29MF1xNSZ Series, PR39MF1xNSZ Series and 1. Recognized by UL508 (except for PR49MF11NSZ PR49MF11NSZ Series Solid State Relays (SSR) are Series), file No. E94758 (as model No. R29MF1/ an integration of an infrared emitting diode (IRED), a R39MF1) Phototriac Detector and a main output Triac. These 2. Approved by CSA 22.2 No.14 (except for devices are ideally suited for controlling high voltage PR49MF11NSZ Series), file No. LR63705 (as model AC loads with solid state reliability while providing No. R29MF1/R39MF1) ( ) 4.0kV isolation (V ) from input to output. 3. Optionary available VDE approved (DIN EN 60747-5- iso(rms) 2), file No.40008898 (only for PR39MF1xNSZ Series as model No. R39MF1) Features 4. Package resin : UL flammability grade (94V-0) 1. Output current, I (rms)0.9A T () DIN EN60747-5-2 : successor standard of DIN VDE0884. 2. Non-zero crossing functionary Up to Date codeR (December 2003), approval of DIN 3. 8 pin DIP package (SMT gullwing also available) VDE0884. From Date codeS1 (January 2004), approval of DIN 4. High repetitive peak off-state voltage EN60747-5-2. (V : 800V, PR49MF11NSZ Series) DRM (V : 600V, PR39MF1xNSZ Series) DRM (V : 400V, PR29MF1xNSZ Series) DRM Applications 5. I ranks available (see Model Line-up in this FT 1. Isolated interface between high voltage AC devices datasheet) and lower voltage DC control circuitry. 6. Superior noise immunity 2. Switching motors, fans, heaters, solenoids, and (dV/dt : MIN. 100V/s, PR29MF1xNSZ Series and valves. PR39MF1xNSZ Series) 3. Phase or power control in applications such as (dV/dt : MIN. 50V/s, PR49MF11NSZ Series) lighting and temperature control equipment. 7. Response time, t : MAX. 100s on 8. Lead-free terminal components are also available (see Model Line-up section in this datasheet) 9. High isolation voltage between input and output (V (rms) : 4.0kV) iso Notice The content of data sheet is subject to change without prior notice. In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. Sheet No.: D4-A00601EN 1 Date Mar. 31. 2004 SHARP CorporationPR29MF1xNSZ Series/PR39MF1xNSZ Series/PR49MF11NSZ Series Internal Connection Diagram 8 6 5 1 5 Cathode Gate 2 6 Anode Output (T ) 1 3 8 Cathode Output (T ) 2 4 Cathode 1 2 3 4 (Unit : mm) Outline Dimensions 1. Through-Hole ex. PR29MF11NSZF 2. SMT Gullwing Lead-Form ex. PR29MF11NIPF 0.3 0.3 1.2 1.2 0.2 0.2 1.05 1.05 8 6 5 SHARP Model No. SHARP Model No. 8 6 5 mark mark R29MF1 R29MF1 Rank mark Rank mark CSA mark CSA mark 1 2 3 4 Date code (2 digit) Anode 1 2 3 4 mark Factory identification mark Date code (2 digit) Anode mark Factory identification mark 0.5 0.3 9.66 7.62 0.5 0.3 9.66 7.62 Epoxy resin Epoxy resin +0.4 +0.4 0.1 0.25 0.25 2.54 1.00 1.00 0.26 0.1 2.54 0.5 +0 10.0 0.5 :0 to 13 Product mass : approx. 0.56g Product mass : approx. 0.54g 3. Through-Hole ex. PR39MF11NSZF 4. SMT Gullwing Lead-Form ex. PR39MF11NIPF 0.3 0.3 1.2 1.2 0.2 0.2 1.05 1.05 8 6 5 SHARP Model No. SHARP Model No. 8 6 5 mark mark R39MF1 R39MF1 Rank mark Rank mark CSA mark CSA mark 1 2 3 4 Date code (2 digit) Anode 1 2 3 4 mark Factory identification mark Date code (2 digit) Anode mark Factory identification mark 0.5 0.3 9.66 7.62 0.5 0.3 9.66 7.62 Epoxy resin Epoxy resin +0.4 +0.4 0.1 0.25 0.25 2.54 1.00 1.00 0.26 0.1 2.54 0.5 +0 10.00.5 :0 to 13 Product mass : approx. 0.56g Product mass : approx. 0.54g Sheet No.: D4-A00601EN 2 0.5 0.5 3.25 3.25 TYP. 0.5 0.5 TYP. 0.5 0.5 0.5 0.5 3.5 6.5 3.5 6.5 0.5 0.5 0.5 0.5 3.5 6.5 3.5 6.5 0.1 0.1 0.26 0.26 0.25 0.25 0.35 0.35