LBA716 Dual Single-Pole OptoMOS Relays Normally Open & Normally Closed INTEGRATED CIRCUITS DIVISION Parameter Rating Units Description Load Voltage 60 V LBA716 is a 60V, 1A, 0.4 dual Solid State Relay Load Current 1 A / A integrating independent normally open rms DC On-Resistance (max) 0.4 (1-Form-A) and normally closed (1-Form-B) relays into a single package. It features a superior combination of low on-resistance and enhanced peak load current (5A max.) handling capability. Features 3750V Input/Output Isolation rms Approvals Low Drive Power Requirements UL Recognized Component: File E76270 (TTL/CMOS Compatible) CSA Certified Component: Certificate 1175739 Arc-Free With No Snubbing Circuits EN/IEC 60950-1 Certified Component No EMI/RFI Generation TUV Certificate B 09 07 49410 004 Small 8-Pin Package Machine Insertable, Wave Solderable Surface Mount Version Ordering Information Tape & Reel available Part Description LBA716 8-Pin DIP (50/Tube) LBA716S 8-Pin Surface Mount (50/Tube) Applications LBA716STR 8-Pin Surface Mount (1000/Reel) Telecommunications Instrumentation Multiplexers Switching Characteristics of Data Acquisition Normally Open Devices Electronic Switching I/O Subsystems Form-A Utility Meters (gas, oil, electric and water) Medical Equipment-Patient/Equipment Isolation I Security F Aerospace 90% Industrial Controls 10% I LOAD t t on off Pin Configuration Switching Characteristics of Normally Closed Devices 1 8 + Control - Normally Closed Normally Closed 2 7 Form-B Control - Normally Closed 3 6 + Control - Normally Open Normally Open I F 4 5 Control - Normally Open I LOAD 90% 10% t t off on Pb e3 DS-LBA716-R03 1 www.ixysic.comLBA716 INTEGRATED CIRCUITS DIVISION Absolute Maximum Ratings 25C Absolute Maximum Ratings are stress ratings. Stresses in Parameter Ratings Units excess of these ratings can cause permanent damage to Blocking Voltage 60 V P the device. Functional operation of the device at conditions Reverse Input Voltage 5 V beyond those indicated in the operational sections of this Input Control Current 50 mA data sheet is not implied. 1A Peak (10ms) 1 Input Power Dissipation 150 mW 2 Total Power Dissipation 800 mW Isolation Voltage, Input to Output 3750 V rms Operational Temperature -40 to +85 C Storage Temperature -40 to +125 C 1 Derate linearly 1.33 mW / C 2 Derate linearly 6.67 mW / C Electrical Characteristics 25C Parameter Conditions Symbol Min Typ Max Units Characteristics: Form-A (Normally Open) Load Current -I -- 1 A / A Continuous L rms DC Peak t < 10ms I -- 5 A LPK P On-Resistance I =1A R - 0.21 0.4 L ON Off-State Leakage Current V =60V I -- 1 A L LEAK Output Capacitance 50V, f=1MHz C - 105 - pF OUT Switching Speeds Turn-On t - 0.7 5 on I =5mA, V =10V ms F L Turn-Off t - 0.09 5 off Input Control Current to Activate I =1A I -- 2 mA L F Input Control Current to Deactivate - I 0.1 - - mA F Characteristics: Form-B (Normally Closed) Load Current -I - - 0.5 A / A Continuous L rms DC Peak t < 10ms I - - 1.2 A LPK P On-Resistance I =0.5A R - 1.63 2 L ON Off-State Leakage Current V =60V, I =5mA I -- 1 A L F LEAK Output Capacitance I =5mA, 50V, f=1MHz C - 280 - pF F OUT Switching Speeds Turn-On t - 0.58 5 on I =5mA, V =10V ms F L Turn-Off t - 0.76 5 off Input Control Current to Activate - I -- 2 mA F Input Control Current to Deactivate I =0.5A I 0.1 - - mA L F Common Characteristics: Form-A and Form-B Input Voltage Drop I =5mA V 0.9 1.2 1.4 V F F Reverse Input Current V =5V I -- 10 A R R Capacitance, Input to Output - C -3- pF I/O *NOTE: If both poles operate simultaneously, then load current must be derated so as not to exceed the package power dissipation value. R03 2 www.ixysic.com