SLG59M1736C-EVB Silego

GreenFET3 SLG59M1736C Layout Guide Content 1. Description 2. Power and Ground Planes 3. Basic Test Setup and Connections Description The SLG59M1736C is a 33 m, ~ 2.2 A single- channel load switch that is able to switch 2.5 V to 5.5 V power rails. The product is packaged in an ultra-small 0.8 x 0.8 mm package. Figure 1: SLG59M1736C Block Diagram GND GND ON U1 1 4 ON GND 2 3 VIN VOUT C1 C2 10uF 33uF RL GND D/VIN D SENSE GND S/VOUT S SENSE Figure 4. SLG59M1736C Connection Circuit 1 1 1 1 1 2 1 3 1 1 1 1 1 1 1 2. Power and Ground Planes This layout guide provides some important information 2.1. The trace length from the control IC to the ON pin about the PCB layout of SLG59M1736C applications. (PIN1) should be as short as possible and must SILEGO WLCSP 0.8x0.8-4L PKG Unit: um avoid crossing this trace with power rails. 2.2. The D/VIN and S/VOUT pins carry significant current. Please note how the D/VIN and S/VOUT pads are placed directly on the power planes in Figure 3, which minimizes the RDS associated ON with long, narrow traces. The D/VIN, S/VOUT and GND pins dissipate most of the heat generated during high-load current condition. The layout shown in Figure 3 is illustrating a proper solution for heat to transfer as efficiently as possible out of the device. 2.3. The GND pin (A2) should be connected to GND. 2.4. 2 oz. copper is recommended for higher currents. Figure 2. SLG59M1736C Package Dimensions and Recommended Land Pattern