SLG6M6201V Silego

SLG6M6201V SLG6M6201V TM CurrentPAK Ultra-small 3.8 m, 10 A Power Switch with Current Sense General Description Pin Configuration The SLG6M6201V is a 3.8 m 10 A single-channel load switch that is able to switch 3.0 V to 3.6 V power rails. The VDD GND product is packaged in an ultra-small 2 x 3 mm package. 1 ON1 16 IOUT 18 17 Features 2 2 x 3 mm STQFN 18L FC package (6 fused pins for drain MODE 15 PG/FAULT and 6 fused pins for source) D 3 14 S Logic level ON pins capable of supporting 1.05 V CMOS Logic D 4 S 13 3.8 m RDS while supporting 10 A ON Discharges load when off 5 12 D S Two Over Current Protection Modes (Short Circuit/Active) D 6 11 S Short Circuit Current Limit Active Current Limit 10 D 7 89 S Over Temperature Protection High / Low Current Select DS Automatic Switch from Low to High Current Current Sense Output: 18-pin STQFN FC Wide IDS current sensing range: 50 mA to 10 A (Top View) High Current Mode Accuracy 3% from 3A to 10A 6% from 1A to 2.9A Applications Low Current Mode Accuracy Notebook Power Rail Switching 10% from 0.1A to 1A Tablet Power Rail Switching Pb-Free / Halogen-Free / RoHS 6/6 compliant Server Power Rail Switching Operating Temperature: -10 C to 70C Telecommunications Equipment Power Rail Switching Operating Voltage V : 3.0 V to 3.6 V DD V : 3.0 V to 3.6 V D Silego Technology, Inc. Rev 1.0 SLG6M6201 DS r100 Revised April 1, 2015SLG6M6201V Block Diagram Low Current Bank D S 3.0 to 3.6 V High Current Bank IOUT 0 to 2.5 V (full scale) Programmable Current VDD Temp Limit 1F 2 k Detect b 15:13 3.0 to 3.6 V Short Circuit 4.7 F Programmable Current Limit Programmable b 20:16 Ramp Options 10 k pullup V + 5 V S Charge Pump PG/FAULT b 7:6 ON1 (Open Drain) + Programmable Logic Cell - Programmable (PLC) OSC VREF MODE b 10:8 0.85 to VDD Programmable 1024-bit NVM Discharge b 12:11 b 5:0 Fault SLG6M6201 DS r100 Page 2 of 18 High Current Drive Low Current Drive