C8051F560-TB Silicon Labs

C8051F55x/56x/57x C8051F560 DEVELOPMENT KIT USERS GUIDE 1. Relevant Devices The C8051F560 Development Kit is intended as a development platform for the microcontrollers in the C8051F55x/56x/57x MCU family. The target board included in this kit is provided with a pre-soldered C8051F568 MCU (QFN40 package) and a C8051F550 MCU (QFN24 package). Code developed on the C8051F568 can be easily ported to the other members of this MCU family. Refer to the C8051F55x/56x/57x data sheet for the differences between the members of this MCU family. 2. Kit Contents The C8051F560 Development Kit contains the following items: C8051F560 Target Board C8051Fxxx Development Kit Quick-Start Guide AC to DC Power Adapter USB Debug Adapter Two USB Cables 3. Hardware Setup Refer to Figure 1 for a diagram of the hardware configuration. 1. Connect the USB Debug Adapter to the DEBUG A connector on the target board with the 10-pin ribbon cable. 2. Connect one end of the USB cable to the USB connector on the USB Debug Adapter. 3. Verify that shorting blocks are installed on the target board as shown in Figure 5 on page 7. 4. Connect the other end of the USB cable to a USB Port on the PC. 5. Connect the ac/dc power adapter to power jack P4 on the target board. Target Board PC AC/DC Adapter USB Cable USB Debug Adapter Figure 1. Hardware Setup using a USB Debug Adapter Rev. 0.2 6/15 Copyright 2015 by Silicon Laboratories C8051F55x/56x/57x P1 SIDE B Port 0 A TB1 TB2 P5 R27 Port 0 B COMM CP J0 2102 J20 J14 Port 3 A DS4 J8 J12 SIDE A J11 J4 U1 J6 J22 J17 J5 Port 1 B J23 J3 C8051 P1.3 A F568 P1.4 A U2 DS2 J24 F550 J13 J19 Port 2 A J18 C8051F560-TB PWR LED J10 J9 P1.4 B J2 J15 Port 2 B J7 RESET A J21 DS3 SILICON LABS Port 1 A www.silabs.com P1.3 B J16 DS1 P4 TB3 RESET B DEBUG A DEBUG B J1 P2 P3 Silicon Laboratories USB DEBUG ADAPTER Run Stop Power CAN +LIN V LIN OUT LIN GND CAN H CAN L GND CAN LINC8051F55x/56x/57x Notes: Use the Reset icon in the IDE to reset the target when connected during a debug session. Remove power from the target board and the USB Debug Adapter before connecting or disconnecting the ribbon cable from the target board. Connecting or disconnecting the cable when the devices have power can damage the device and/or the USB Debug Adapter. 4. Software Setup Simplicity Studio greatly reduces development time and complexity with Silicon Labs EFM32 and 8051 MCU products by providing a high-powered IDE, tools for hardware configuration, and links to helpful resources, all in one place. Once Simplicity Studio is installed, the application itself can be used to install additional software and documentation components to aid in the development and evaluation process. Figure 2. Simplicity Studio The following Simplicity Studio components are required for the C8051F560 Development Kit: 8051 Products Part Support Simplicity Developer Platform Download and install Simplicity Studio from www.silabs.com/8bit-software or www.silabs.com/simplicity-studio. Once installed, run Simplicity Studio by selecting Start Silicon LabsSimplicity Studio Simplicity Studio from the start menu or clicking the Simplicity Studio shortcut on the desktop. Follow the instructions to install the software, and click Simplicity IDE to launch the IDE. The first time the project creation wizard runs, the Setup Environment wizard will guide the user through the process of configuring the build tools and SDK selection. In the Part Selection step of the wizard, select from the list of installed parts only the parts to use during 2 Rev. 0.2