RS14100 Wireless MCU Product Family TM WiSeMCU Overview Redpine Signals RS14100 WiSeMCU family of SoCs and modules are the industrys first Wireless Secure MCU family with a comprehensive multi-protocol wireless sub-system. It has an integrated ultra-low-power microcontroller, a built-in wireless subsystem, advanced security, high performance mixed-signal peripherals and integrated power-management. Solution Highlights Efficient on-chip application processor based on ARM Cortex -M4F with up to 180 MHz performance, up to 4 MB dedicated flash Co-existence of multiple wireless protocols including 802.11a/b/g/n (2.4 GHz and 5 GHz), dual-mode Bluetooth 5 Ultra-low power consumption with multiple power modes to reduce the system energy consumption Multiple levels of security including PUF (Physically Unclonable Function), Crypto HW accelerators, Secure Bootloader and Secure Zone to create a highly secure system Fully integrated and wireless certified modules with multiple sizes as small as 4.63 mm x 7.90 mm Integrated networking and wireless stacks for ease of integration Leading edge RF performance providing long range and higher throughputs Unique peripherals like ULP sub-system, voice activity detection (VAD) and up to 8 capacitive touch sensor inputs Features Microcontroller Embedded Wi-Fi Stack ARM Cortex-M4 core with up to 180 MHz Support for Embedded Wi-Fi Client mode, Wi-Fi Access point mode, Integrated FPU, MPU and NVIC Wi-Fi Direct and Enterprise Security SWD and JTAG debug options Supports advanced Wi-Fi security features: WPA/WPA2-Personal Internal and external oscillators with PLLs and Enterprise (EAP-TLS, EAP-FAST, EAP-TTLS, EAP-PEAP, EAP-LEAP, Flash In-Application Programming (IAP), In-System Programming PEAP-MSCHAP-V2) (ISP) and Over-the-Air Wireless Firmware Upgrade Integrated TCP/IP stack (IPV4/IPV6), HTTP/HTTPS, DHCP, ICMP, SSL Power-On Reset (POR), Brown-Out and Black-out Detect (BOD) with /TLS, Web sockets, IGMP, DNS, DNS-SD, SNMP, FTP Client separate thresholds Wi-Fi firmware upgrade and provisioning Support for concurrent Wi-Fi, dual-mode Bluetooth 5 Memory Up to 4 MB integrated Quad-SPI flash with inline AES engine and XIP Embedded Bluetooth Stack Up to 208 KB SRAM EDR+2.1, 4.0, 4.1, 4.2 and 5.0 4-way set-associative 16KB I-Cache BT LE 1 Mbps, 2 Mbps and Long Range modes Security Piconet and scatternet HW device identity and key storage with PUF 1 BT profile support for SPP, A2DP, AVRCP, HFP, PBAP, IAP, GAP, SDP, Trusted Execution Environment with Secure Boot loader L2CAP, RFCOMM, GATT, IAP1, IAP2 Accelerators: AES128/256, SHA256/384/512, RSA, ECC, ECDH, RNG, CRC MCU Sub-system Power Consumption Wi-Fi 1 Active current as low as 19 uA/MHz in low power mode Compliant to single-spatial stream IEEE 802.11 a/b/g/n with dual 1 Deep sleep mode current: ~450 nA band (2.4 and 5GHz) support Dynamic Voltage & Frequency Scaling Support for 20 MHz and 40 MHz channel bandwidths Deep sleep mode with only timer active with and without RAM 1 Transmit power up to +20 dBm with integrated PA retention 1 Receive sensitivity as low as -97 dBm 1 Application data throughput up to 40 Mbps in TCP mode Wireless Sub-system Power Consumption 1 Wi-Fi standby associated current of <90 uA for DTIM 3 (2.4 GHz) Bluetooth 1 Wi-Fi TX current = 260 mA (6 Mbps, 20 dBm, 2.4 GHz), RX current = Compliant to dual-mode Bluetooth 5 1 30 mA (6 Mbps, 2.4 GHz) 1 Transmit power up to +20 dBm with integrated PA 1 <7 mA transmit current in BT 5 mode, 0 dBm output power, 1 Mbps 1 Receive sensitivity as low as -104 dBm data rate Data rates: 125 kbps, 500 kbps, 1 Mbps, 2 Mbps, 3 Mbps RF Features Integrated baseband processor with calibration memory, RF transceiver, high-power amplifier, balun, T/R switch and flash memory Dual external antenna (diversity supported) www.redpinesignals.comDigital Peripherals Operating Conditions USB HS OTG with integrated HS transceiver Single supply: 2.1 to 3.6V or 1.85V 10/100 Mbps Ethernet MAC with RMII Operating temperature: -40C to +85C (Industrial grade) SDIO 3.0 host and slave, SD/eMMC 3x USART, 4x SPI, 3x I2C, 2x I2S, SIO, CAN 2.0B Packages Timers: 5x 32-bit, 1x 16/32-bit, 1x 24-bit, WWDT, RTC, RIT, QEI Modules with and without integrated antenna Up to 85 GPIOs with GPIO multiplexer SoC packages - WLCSP and QFN Analog Peripherals Evaluation Kit: 12-bit 16-ch, 5 Msps ADC, 10-bit DAC Single band P/N: RS14100-SB-EVK1 3x op-amps, 2x Comparators and Temperature Sensor Dual band P/N: RS14100-DB-EVK1 8 capacitive touch sensor inputs Voice Activity Detection (VAD) Software and Regulatory Certifications 2 Wi-Fi Alliance 2 Bluetooth Qualification 2 Regulatory certifications (FCC, IC, CE, ETSI, TELEC) Package Options Module Packages Part Ordering Options SoC Packages Module Packages Package Package Type, Integrated Part Number Wireless CPU Freq Flash+RAM Dimension (mm) Frequency Band (ppg) (ppg) Code Pins Antenna RS14100-SB00-140F-ppg SBW + BT 5 100 MHz 4 MB + 208 KB - CA0, CA1 CA0 LGA, 173 9.1 x 9.8 x 1.2 Single Band (2.4 GHz) No CC0 LGA, 173 9.1 x 9.8 x 1.2 Dual Band (2.4 / 5 GHz) No RS14100-SB00-240F-ppg SBW + BT 5 180 MHz 4 MB + 208 KB - CA0, CA1 CA1 LGA, 107 15.0 x 15.70 x 2.2 Single Band (2.4 GHz) Antenna RS14100-SB00-110F-ppg SBW + BT 5 100 MHz 1MB + 208 KB QMS B00 and u.FL RS14100-SB00-210F-ppg SBW + BT 5 180 MHz 1MB + 208 KB QMS B00 CC1 LGA, 107 15.0 x 15.70 x 2.2 Dual Band (2.4 / 5 GHz) Connector RS14100-SB00-1N0F-ppg SBW + BT 5 100 MHz 0MB + 208 KB QMS, WMS B00 B00 LGA, 126 4.63 x 7.90 x 0.9 Single Band (2.4 GHz) No RS14100-SB00-2N0F-ppg SBW + BT 5 180 MHz 0MB + 208 KB QMS, WMS B00 RS14100-DB00-140F-ppg DBW + BT 5 100 MHz 4 MB + 208 KB - CC0, CC1 SoC Packages RS14100-DB00-240F-ppg DBW + BT 5 180 MHz 4 MB + 208 KB - CC0, CC1 Package Code Package Type, Pins Dimension, Pitch (mm) Frequency Band WMS WLCSP, 96 3.51 x 3.6 x 0.5, 0.4 Single Band (2.4 GHz) Note: Replace ppg with desired SoC / Module Packages code SBW: Single Band Wi-Fi (2.4 GHz) QMS QFN, 84 7 x 7 x 0.85, 0.5 Single Band (2.4 GHz) DBW: Dual Band Wi-Fi (2.4/5 GHz) Block diagram Note: The BTSIG certified production parts for this product family will be available in early 2019. 1 2 : Subject to change. Contact Redpine Signals for final numbers. :Contact Redpine for availability. Redpine Signals, Inc. 2107 North First Street, Suite 540, San Jose, California 95131, United States of America. Phone: +1-408-748-3385 Fax: +1-408-705-2019 Email: sales redpinesignals.com Website: www.redpinesignals.com Copyright 2019 Redpine Signals, Inc. All Rights Reserved www.redpinesignals.com