RS9113 Module Family Datasheet Version 3.5 January 2018 Redpine Signals, Inc. 2107 N. First Street, 540 San Jose, CA95131. Tel: (408) 748-3385 Fax: (408) 705-2019 Email: info redpinesignals.com Website: www.redpinesignals.com Redpine Signals, Inc. Proprietary and Confidential RS9113 Module Family Datasheet Version 3.5 Overview: Module Features: The RS9113 module family is based on Redpine Signals WLAN: RS9113 ultra-low-power Convergence SoC. These Compliant to single-spatial stream IEEE 802.11 modules offer dual-band 1x1 802.11n, dual-mode a/b/g/n with dual band (2.4 and 5 GHz) support. Bluetooth 4.0 and ZigBee 802.15.4 in a single device. Support for 20MHz and 40MHz (n-Link only) They are high performance, long range and ultra-low channel bandwidths. power modules and include a proprietary multi- Transmit power up to +17dBm with integrated PA. threaded MAC processor called ThreadArch, digital Receive sensitivity of -97dBm. and analog peripheral interfaces, baseband digital Bluetooth: signal processor, calibration OTP memory, dual-band RF Compliant to dual-mode Bluetooth 4.0 transceiver, dual-band high-power amplifiers, baluns, Transmit power up to 15dBm (class-1) with diplexers, diversity switch and Quad-SPI flash. integrated PA. Receive sensitivity of -94 dBm. The modules are offered with two software architectures hosted and embedded. The hosted ZigBee: variant (n-Link) realizes a host-based architecture Compliant to IEEE 802.15.4 where the necessary MAC and PHY layers are Transmit power up to 15 dBm with integrated PA. implemented in the device to support high- Receive sensitivity of -102 dBm. performance, long range WLAN, Bluetooth and ZigBee ZigBee Pro stack embedded. applications in a 32-bit host processor over SDIO or USB n-Link: interfaces. The embedded variants (WiSeConnect and Seamless integration with 32-bit processors Connect-io-n) realize WLAN, Bluetooth and ZigBee over SDIO and USB. 1 protocols along with Wi-Fi Direct( ), WPA/WPA2-PSK, Host Drivers for Linux, Android and WPA/WPA2-Enterprise (EAP-TLS, EAP-FAST, EAP-TTLS, 2 Windows EAP-PEAP, EAP-LEAP)(1) and a feature-rich networking WiSeConnect and Connect-io-n: stack thus providing a fully-integrated solution for WLAN, Bluetooth and ZigBee stacks embedded low-end wireless applications. These embedded in the device. modules can be connected to 8/16/32-bit host Supports Wi-Fi Direct(1), Access point processors through SPI,UART, USB and USB-CDC mode, WPA/WPA2-PSK, WPA/WPA2- interfaces. Enterprise (EAP-TLS, EAP-FAST, EAP-TTLS, The modules are available in two hardware footprints. EAP-PEAP, EAP-LEAP)1 One footprint type comes with an integrated antenna 3 Bluetooth profiles embedded. and an u.FL connector and the other footprint comes ZigBee Pro stack embedded. without an integrated antenna. TCP/IP stack (IPv4/IPv6), HTTP/HTTPS, DHCP, Applications: ICMP, SSL 3.0/TLS1.2, Websockets, IGMP, FTP Client, SNTP, DNS, mDNS, DNS-SD, Smartphones, Tablets and e-Readers 4 SNMP embedded in the device. VoWi-Fi phones SPI, UART, USB, USB-CDC host interfaces. Smart meters and in-home displays General: Industrial automation and telemetry FCC, IC, ETSI/CE, TELEC Certified Medical devices U.FL connector for external antenna connection. Industrial monitoring and control Dual external antenna for antenna diversity (n- Link only. Home and building automation Wireless firmware upgrade (for Wireless Headset WiSeConnect and Connect-io-n only) Options for single supply of 3.0 to 3.6 V operation 5 or multiple supplies for power saving . 1 This feature is specific to WiSeConnect Modules and not available in Connect-io-n Modules. 2 Drivers for Linux and Android available now. Contact Redpine Signals Sales (sales redpinesignals.com) for availability of drivers Windows. 3 Refer to the Features section for list of profiles supported. 4 mDNS and DNS-SD supported in future software releases. 5 USB Interface needs VBUS level of 5V for detection and enumeration. Redpine Signals, Inc. Proprietary and Confidential Page 2