Dimensions: [mm] Recommended Land Pattern: [mm]
9,9 0,05 9,9 0,05
6,6 0,05 6,6 0,05
0,9 0,05
1,27 1,27
A-A
P.C.B End
A
0,76
Bottom View
Top View
9,52
A
P.C.B Thickness: 1,6 mm
Scale - 6:1
1/4-36UNS-2A
Scale - 2:1
CREATED CHECKED GENERAL TOLERANCE PROJECTION
Article Properties:
Wrth Elektronik eiSos GmbH & Co. KG
METHOD
EMC & Inductive Solutions DaSc JTs DIN ISO 2768-1m
Properties Value Unit
Max-Eyth-Str. 1
DESCRIPTION
PCB Thickness 1.6 mm 74638 Waldenburg
Germany Reverse Polarity SMA PCB End
Tel. +49 (0) 79 42 945 - 0
ORDER CODE
Launch Jack Round Post for 1.6mm
www.we-online.com
63012202124505
eiSos@we-online.com PCB WR-RPSMA
REVISION STATUS DATE (YYYY-MM-DD) BUSINESS UNIT PAGE
001.000 Valid 2018-03-19 eiCan 1/5
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Wrth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Wrth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
7,92
1,27
8,89 5,38
1,85
1,27
1,73
0,38
5,6 0,05
5,6 0,05Material Properties:
Contact Resistance After Test 4) R 2 m max.
Withstanding Voltage 500 V (AC) in 60 sec. 1000 V (RMS) min.
Insulator Material PTFE
Working Voltage 5) 335 V (RMS) min.
Insulator Color White
Center Contact Material Brass
1) Center Contact
2) Center Contact
Center Contact Plating Gold, min. 0.76m over Nickel
3) Outer Contact
4) Outer Contact
Body Material Brass
5) At sea level
Body Plating Gold, min. 0.076m over Nickel
VSWR: The VSWR in application varies decisively according to PCB layout
Mechanical Properties:
Kind Properties:
Properties Value Unit Tol.
Interface MIL-STD-348
Center Contact Retention (Axial) 26.7 N min.
Connector Type RP SMA
Mating Cycle 500 Cycles
Gender Jack
Recommended Mating Torque 57 Ncm
Orientation Type Straight
Packaging Properties:
General Information:
Properties Value
Operating Temperature -65 C up to +165 C
Packaging Tray
Compliance RoHS
Packaging Unit Qty. 180
Electrical Properties:
Properties Test conditions Value Unit Tol.
Impedance DC~18 GHz Z 50
Frequency Range f DC~18 GHz
VSWR DC~12.4 GHz 1.2 max.
Insertion Loss DC~12.4 GHz IL 0.14 dB max.
VSWR 12.4 GHz~18 GHz 1.4 max.
Insertion Loss 12.4 GHz~18 GHz IL 0.2 dB max.
Insulation Resistance 500 V (DC) in 120 sec. R 5000 M min.
ISO
Contact Resistance Initial 1) R 3 m max.
Contact Resistance After Test 2) R 4 m max.
Contact Resistance Initial 3) R 2 m max.
CREATED CHECKED GENERAL TOLERANCE PROJECTION
Wrth Elektronik eiSos GmbH & Co. KG
METHOD
EMC & Inductive Solutions DaSc JTs DIN ISO 2768-1m
Max-Eyth-Str. 1
DESCRIPTION
74638 Waldenburg
Germany Reverse Polarity SMA PCB End
Tel. +49 (0) 79 42 945 - 0
ORDER CODE
Launch Jack Round Post for 1.6mm
www.we-online.com
63012202124505
eiSos@we-online.com PCB WR-RPSMA
REVISION STATUS DATE (YYYY-MM-DD) BUSINESS UNIT PAGE
001.000 Valid 2018-03-19 eiCan 2/5
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Wrth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Wrth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.