DATA SHEET CLA4606-085LF: Surface-Mount Limiter Diode Applications Anode Anode (Pin 3) (Pin 1) Low-loss, high-power limiters Receiver protectors Features Cathode Low thermal resistance: 91 C/W (Pin 2, Exposed Paddle) Typical threshold level: +10 dBm 2.5 GHz Figure 1. CLA4606-085LF Block Diagram Low capacitance: 0.3 pF Low-profile, ultra-miniature QFN (3-pin, 2 x 2 mm) package (MSL1, 260 C per JEDEC J-STD-020) Description The CLA4606-085LF is a surface-mountable, low-capacitance silicon PIN limiter diode designed as a shunt-connected PIN diode TM Skyworks Green products are compliant with for high-power limiter applications from 10 MHz to over 6 GHz. all applicable legislation and are halogen-free. Maximum resistance at 10 mA is 2 and maximum capacitance For additional information, refer to Skyworks at 6 V is 0.38 pF. The combination of low junction capacitance, TM Denition of Green , document number low parasitic inductance, low thermal resistance, and nominal SQ040074. 2.5 um I-region width makes the CLA4606-085LF useful in large signal-limiter applications. The threshold level is +12 dBm, nominal. A block diagram of the CLA4606-085LF is shown in Figure 1. The absolute maximum ratings of the CLA4606-085LF are provided in Table 1. Electrical specifications are provided in Table 2. Typical performance characteristics of the CLA4606-085LF are provided in Table 3 and illustrated in Figures 4 and 5. Skyworks Solutions, Inc. Phone 781 376-3000 Fax 781 376-3100 sales skyworksinc.com www.skyworksinc.com 201636I Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice June 25, 2020 1 DATA SHEET CLA4606-085LF: Surface-Mount Limiter Diode 1 Table 1. CLA4606-085LF Absolute Maximum Ratings Parameter Symbol Minimum Maximum Units Reverse voltage VR 75 V Forward current 25 C IF 1.5 A CW power dissipation 85 C PD 1 W Peak 1 s pulse power dissipation 85 C (10% duty cycle) 10 W Storage temperature TSTG -65 +200 C Junction temperature TJ 175 C Operating temperature TA -55 +150 C Electrostatic discharge: ESD Charged Device Model (CDM), Class 4 1000 V Human Body Model (HBM), Class 1B 500 V Machine Model (MM), Class A 100 V 1 Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device. ESD HANDLING: Although this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device. This device must be protected at all times from ESD when handling or transporting. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD handling precautions should be used at all times. 1 Table 2. CLA4606-085LF Electrical Specifications (T = +25 C Unless Otherwise Noted) A Parameter Symbol Test Condition Min Typ Max Units Breakdown voltage VB IR = 10 A 45 75 V Reverse current IR VR = 36 V 1 uA Capacitance CT f = 1 MHz, VR = 6 V 0.30 0.38 pF Series resistance RS f = 500 MHz, IF = 10 mA 1.6 2.0 Series inductance LS 0.3 nH Carrier lifetime TL IF = 10 mA 15 ns I region width W 2.5 um CW thermal resistance JC Junction to case 91 C/W Peak pulse thermal resistance P Single 1 s pulse width Junction to case (0.01% duty cycle) 0.43 C/W 1 Performance is guaranteed only under the conditions listed in this table. Table 3. Typical Performance 25 C Insertion Loss Input Power for Maximum Pulsed Output Maximum Maximum CW Part Number 10 dBm 1 dB Loss Input Power Pulsed Input Input power Recovery Time (dB) (dBm) (dBm) (dBm) (W) (ns) CLA4606-085LF 0.2 +10 +64 +36 5 20 Notes: Limiter power results 2.5 GHz for shunt-connected, single-limiter diode and DC return in 50 line. Pulsed power measurements taken at 1 us pulse width, pulse frequency = 10 kHz, and 0.01% duty cycle. Maximum CW input power 25 C heat sink. Derate linearly to 0 W 175 C. Recovery time represents the transition time from the high-loss state to the low-loss state following the removal of a high-power input. It is defined as the time from the end of the high-power pulse to the time when insertion loss has returned to within 3 dB of the quiescent (low-power) state. Skyworks Solutions, Inc. Phone 781 376-3000 Fax 781 376-3100 sales skyworksinc.com www.skyworksinc.com 201636I Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice June 25, 2020 2