DATA SHEET SMPA1302-079LF: Switch and Attenuator Plastic-Packaged PIN Diode Automotive Applications Infotainment Navigation Telematics Garage door openers Wireless control systems Features Description AEC-Q101 qualified The SMPA1302-079LF plastic-packaged, surface-mountable, low Designed for large signal switching applications capacitance (0.3 pF) silicon PIN diode is designed for switch and Designed for low distortion attenuator applications attenuator applications used in vehicle infotainment. Low capacitance (< 0.30 pF) for high isolation performance The nominal 50 m I region width, combined with a maximum resistance of 3 at 10 mA, makes these diodes useful in large Package rated MSL1 260 C per JEDEC J-STD-020 signal switch applications. The low capacitance (< 0.30 pF) is ideal for high isolation TM switching, and the long lifetime (700 ns) makes this part ideal for Skyworks Green products are compliant with low distortion attenuator applications. all applicable legislation and are halogen-free. For additional information, refer to Skyworks Table 1 describes the SMPA1302-079LF package and marking. TM Denition of Green , document number SQ040074. Table 1. Package and Marking Single SC-79 Green SMPA1302-079LF Marking: Cathode and C3 LS = 0.7 nH The Pb-free symbol or LF in the part number denotes a lead-free, RoHS- compliant package unless otherwise noted as Green. Tin/lead (Sn/Pb) packaging is not recommended for new designs. Skyworks Solutions, Inc. Phone 781 376-3000 Fax 781 376-3100 sales skyworksinc.com www.skyworksinc.com 203192C Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice June 21, 2018 1 DATA SHEET SMPA1302-079LF PIN DIODE Electrical and Mechanical Specifications The absolute maximum ratings of the SMPA1302-079LF are Typical performance characteristics of the SMPA1302-079LF are provided in Table 2. Electrical specifications are provided in illustrated in Figures 1 to 4. Table 3. Resistance versus temperature measurements are provided in Table 4. 1 Table 2. SMPA1302-079LF Absolute Maximum Ratings Parameter Symbol Minimum Maximum Units Reverse voltage V 200 V R Power dissipation 25 C lead temperature PD 250 mW Storage temperature T -65 +150 C STG Operating temperature TA -65 +150 C Electrostatic discharge: ESD Human Body Model (HBM), Class 1C 1000 2000 V 1 Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device. ESD HANDLING: Although this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device. This device must be protected at all times from ESD when handling or transporting. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD handling precautions should be used at all times. 1 Table 3. SMPA1302-079LF Electrical Specifications (T = +25 C, Unless Otherwise Noted) A Parameter Symbol Test Condition Min Typical Max Units Reverse current IR VR = 200 V 10 A Capacitance C f = 1 MHz, V = 30 V 0.3 pF T Resistance RS f = 100 MHz I = 1 mA 15 20 I = 10 mA 3 I = 100 mA 1.5 Forward voltage V I = 10 mA 0.8 V F F Carrier lifetime TI I = 10 mA 0.7 s F I region width 50 m 1 Performance is guaranteed only under the conditions listed in this table. Skyworks Solutions, Inc. Phone 781 376-3000 Fax 781 376-3100 sales skyworksinc.com www.skyworksinc.com 2 June 21, 2018 Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice 203192C