DATA SHEET SMP1330-085LF: Surface-Mount Limiter Diode Applications Anode Anode (Pin 3) (Pin 1) Low-loss, high-power limiters Receiver protectors Features Cathode Low thermal resistance: 91 C/W (Pin 2, Exposed Paddle) Typical threshold level: +9 dBm Figure 1. SMP1330-085LF Block Diagram Low capacitance: 0.55 pF Low-profile, ultra-miniature QFN (3-pin, 2 x 2 mm) package (MSL1, 260 C per JEDEC J-STD-020) Description The SMP1330-085LF is a surface-mountable, low-capacitance silicon PIN limiter diode designed as a shunt connected PIN diode TM Skyworks Green products are compliant with for high power limiter applications up to 6 GHz. all applicable legislation and are halogen-free. Maximum resistance at 10 mA is 2 and maximum capacitance For additional information, refer to Skyworks at 0 V is 0.55 pF. The combination of low junction capacitance, TM Denition of Green , document number low parasitic inductance, low thermal resistance, and nominal SQ040074. 2 um I-region width, makes the SMP1330-085LF useful in large signal limiter applications. The threshold level is +9 dBm at 1 GHz. A block diagram of the SMP1330-085LF is shown in Figure 1. The absolute maximum ratings of the SMP1330-085LF are provided in Table 1. Electrical specifications are provided in Table 2. Typical performance characteristics of the SMP1330-085LF are provided in Table 3 and illustrated in Figures 4 and 5 Skyworks Solutions, Inc. Phone 781 376-3000 Fax 781 376-3100 sales skyworksinc.com www.skyworksinc.com 201326L Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice June 25, 2020 1 DATA SHEET SMP1330-085LF: Surface-Mount Limiter Diode 1 Table 1. SMP1330-085LF Absolute Maximum Ratings Parameter Symbol Minimum Maximum Units Reverse voltage VR 50 V Forward current 25 C IF 1.5 A CW power dissipation 25 C PD 1.1 W Peak pulse power dissipation 25 C (10% duty cycle) 11 W Storage temperature TSTG -65 +175 C Junction temperature TJ +175 C Operating temperature TA -55 +150 C Electrostatic discharge: ESD Human Body Model (HBM), Class 1A 250 500 V 1 Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device. ESD HANDLING: Although this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device. This device must be protected at all times from ESD when handling or transporting. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD handling precautions should be used at all times. 1 Table 2. SMP1330-085LF Electrical Specifications (T = +25 C Unless Otherwise Noted) A Parameter Symbol Test Condition Min Typ Max Units Breakdown voltage VB IR = 10 A 30 50 V Reverse current IR V = 24 V 100 nA R Capacitance CT f = 1 MHz: VR = 0 V 0.55 1.00 pF VR = 6 V 0.50 0.60 pF Capacitance ratio CTR C 0 V/C 6 V 1.22 - T T Series resistance RS f = 100 MHz, IF = 10 mA 1.6 2.0 Carrier lifetime TL IF = 10 mA 13 ns I region width W 2 um CW thermal resistance JC Junction-to-case 89 C/W Peak thermal resistance P Single 1 us pulse width, junction-to- case (10% duty cycle) 9 C/W 1 Performance is guaranteed only under the conditions listed in this table. Skyworks Solutions, Inc. Phone 781 376-3000 Fax 781 376-3100 sales skyworksinc.com www.skyworksinc.com 201326L Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice June 25, 2020 2