DATA SHEET SMPA1304-011LF: Low Distortion Attenuator Plastic Packaged PIN Diode Automotive Applications Infotainment Navigation Telematics Garage door openers Wireless control systems Features AEC-Q101 qualified Designed for low distortion attenuator applications Description Frequency range from 5 MHz to >2 GHz The SMPA1304-011LF plastic packaged, surface mountable, Package rated MSL1 260 C per JEDEC J-STD-020 low capacitance (0.3 pF) silicon PIN diode is designed for attenuator applications from 5 MHz to beyond 2 GHz. TM The thick 100 m I region of this PIN diode makes this device very Skyworks Green products are compliant with attractive for use in low distortion attenuators in vehicle all applicable legislation and are halogen-free. infotainment applications. For additional information, refer to Skyworks TM Denition of Green , document number The 1 s typical carrier lifetime of this diode results in a SQ040074. resistance of 20 maximum at 1 mA and 7 maximum at 10 mA. Table 1 describes the SMPA1304-011LF package and marking. Table 1. Package and Marking Single SOD-323 Green SMPA1304-011LF Marking: RG LS = 1.5 nH The Pb-free symbol or LF in the part number denotes a lead-free, RoHS- compliant package unless otherwise noted as Green. Tin/lead (Sn/Pb) packaging is not recommended for new designs. Skyworks Solutions, Inc. Phone 781 376-3000 Fax 781 376-3100 sales skyworksinc.com www.skyworksinc.com 203193B Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice June 22, 2018 1 DATA SHEET SMPA1304-011LF: LOW-DISTORTION ATTENUATOR PLASTIC PACKAGED PIN DIODE Electrical and Mechanical Specifications The absolute maximum ratings of the SMPA1304-011LF are Resistance versus temperature measurements are provided in provided in Table 2. Electrical specifications are provided in Table 4. Typical performance characteristics of the SMPA1304- Table 3. 011LF are illustrated in Figures 1 to 4. 1 Table 2. SMPA1304-011LF Absolute Maximum Ratings Parameter Symbol Minimum Maximum Units Reverse voltage V 200 V R Power dissipation 25 C lead temperature PD 250 mW Storage temperature T -65 +150 C STG Operating temperature TA -65 +150 C Electrostatic discharge: ESD Human Body Model (HBM), Class 1C 2000 V 1 Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device. ESD HANDLING: Although this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device. This device must be protected at all times from ESD when handling or transporting. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD handling precautions should be used at all times. 1 Table 3. SMPA1304-011LF Electrical Specifications (T = +25 C, Unless Otherwise Noted) A Parameter Symbol Test Condition Typical Maximum Units Reverse current IR VR = 200 V 10 A Capacitance C f = 1 MHz, V = 30 V 0.3 pF T f = 100 MHz I = 1 mA 40 50 Resistance R S I = 10 mA 7 I = 100 mA 2 Forward voltage VF IF = 10 mA 0.8 V Carrier lifetime Tl I = 10 mA 1 s F I region width 100 m 1 Performance is guaranteed only under the conditions listed in this table. Skyworks Solutions, Inc. Phone 781 376-3000 Fax 781 376-3100 sales skyworksinc.com www.skyworksinc.com 2 June 22, 2018 Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice 203193B