DATA SHEET SMP1330 Series: Plastic Packaged Limiter Diodes Applications WLAN, WiMAX Cellular infrastructure RFID readers Test instruments Features Low-distortion design Description Limiter performance to 4 GHz and higher The SMP1330 series of limiter diodes is designed for use as Low insertion loss passive receiver protectors in wireless and other RF systems Low-cost plastic package covering frequencies up to 4 GHz and higher. These diodes use Skyworks limiter diode technology to produce gold-doped, thin Packages rated MSL1 260 C per JEDEC J-STD-020 base limiters for low-loss, low-distortion performance and good limiter action. Skyworks Green products are compliant with The SMP1330 series of diodes has been characterized in limiter all applicable legislation and are halogen-free. circuits and tightly specified to ensure consistent performance. For additional information, refer to Skyworks Denition of Green, document number SQ04-0074. Skyworks Solutions, Inc. Phone 781 376-3000 Fax 781 376-3100 sales skyworksinc.com www.skyworksinc.com 200050N Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice June 30, 2016 1 DATA SHEET SMP1330 SERIES DIODES Electrical and Mechanical Specifications Package and Handling Information The absolute maximum ratings of the SMP1330 series are Instructions on the shipping container label regarding exposure to provided in Table 1. moisture after the container seal is broken must be followed. Otherwise, problems related to moisture absorption may occur The part numbers and configurations for the SMP1330 series are when the part is subjected to high temperature during solder provided in Table 2. Electrical specifications are provided in assembly. Table 3. Typical 1 GHz limiter performance measurements are provided in Table 4. The SMP1330 series is rated to Moisture Sensitivity Level 1 (MSL1) at 260 C. These diodes can be used for lead or lead-free Input power versus output power performance for the SMP1330 soldering. For additional information, refer to the Skyworks series is illustrated in Figure 1. Package dimensions are shown in Application Note, Solder Reflow Information, document number Figures 2 (SOT-23) and 4 (SOD-882). Tape and reel dimensions 200164. are provided in Figures 3 (SOT-23) and 5 (SOD-882). Care must be taken when attaching this product, whether it is done manually or in a production solder reflow environment. Production quantities of this product are shipped in a standard tape and reel format. 1 Table 1. SMP1330 Series Absolute Maximum Ratings Parameter Symbol Minimum Maximum Units Reverse voltage VR 20 V Forward current IF 100 mA CW incident power 25 C lead temperature 1 W Peak incident power 1% duty factor, 1 s pulse 100 W Power dissipation 25 C lead temperature PD 250 mW Storage temperature TSTG 65 +150 C Operating temperature TA 65 +150 C 1 Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters set at or below their nominal value. ESD HANDLING: Although this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device. This device must be protected at all times from ESD when handling or transporting. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD handling precautions should be used at all times. Table 2. Part Number and Configuration Series Pair Single SOT-23 SOD-882 SMP1330-005LF SMP1330-040LF Green Green Marking: RQ2 Marking: F L = 1.5 nH L = 0.45 nH S S The Pb-free symbol or LF in the part number denotes a lead-free, RoHS-compliant package unless otherwise noted as Green. Tin/lead (Sn/Pb) packaging is not recommended for new designs. Skyworks Solutions, Inc. Phone 781 376-3000 Fax 781 376-3100 sales skyworksinc.com www.skyworksinc.com 2 June 30, 2016 Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice 200050N