DATA SHEET SE2433T: 2.4 GHz Power Amplifier Applications BOUT B1 B2 PAEN ISM band applications Bias and Control Smart meters Input In-home appliances Match RFIN RFOUT Match Smart thermostats Y1601 Remote controls Figure 1. SE2433T Block Diagram Features Description Suitable for Zigbee , Bluetooth Low Energy, and Bluetooth 1.0 The SE2433T is a high-performance power amplifier, suitable for High output power at +24 dBm Zigbee, Bluetooth Low Energy, and Bluetooth 1.0 applications. Integrated interstage matching The SE2433T is designed for ease of use and maximum flexibility, with an integrated input match and a digital enable control for Integrated 50 input matching Complementary Metal Oxide Semiconductor (CMOS) compatible Fast switch ON/OFF time <1 s device on/off control. 2.0 V to 3.6 V supply operation A functional block diagram of the SE2433T is provided in Standby current <1 A Figure 1. Figure 2 shows the pinout for the SE2433T. Table 1 lists the pin assignments and signal descriptions. QFN package (12-pin, 2.5 x 2 x 0.55 mm, (MSL1, 260 C per JEDEC J-STD-020) TM Skyworks Green products are compliant with all applicable legislation and are halogen-free. For additional information, refer to Skyworks TM Denition of Green , document number SQ040074. 12 11 10 9 RFOUT B2 1 8 B1 2 N/C 7 VCC1 3 N/C 45 6 ts366 N/C pins can be connected to ground, but the DNC pin should be left oating Figure 2. SE2433T Pinout (Top View) Skyworks Solutions, Inc. Phone 781 376-3000 Fax 781 376-3100 sales skyworksinc.com www.skyworksinc.com 202411F Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice October 7, 2015 1 PAEN RFIN BOUT GND N/C DNCDATA SHEET SE2433T: 2.4 GHz POWER AMPLIFIER Table 1. SE2433T Signal Descriptions (Note 1) Pin Name Description Pin Name Description 1 B2 Connect through bias resistor to Pin 11, 7 N/C Not connected. second stage bias. 2 B1 Connect through bias resistor to Pin 11, 8 N/C Not connected. first stage bias. 3 VCC1 Power supply. Connect to positive supply. 9 RFOUT RF output port. 4 RFIN Input port, Connect to 50 single-ended RF 10 DNC Do not connect. source, DC short to GND. 5 GND Ground. Connect to PCB ground. 11 BOUT Bias supply, Connect to through bias resistors to pins 1 and 2. 6 N/C Not connected. 12 PAEN PA enable, Connect to GPIO signal to control power- up status (see Table 7) . Paddle GND Exposed die paddle electrical and thermal ground Connect to PCB ground. Note 1: The N/C pins can be connected to ground, but the DNC pin should be left floating. Logic characteristics and logic controls are provided in Tables 6 Electrical and Mechanical Specifications and 7, respectively. Table 2 provides the absolute maximum ratings, and Table 3 shows the recommended operating conditions. Electrical Typical performance characteristics are shown in Figures 3 characteristics are shown in Tables 4 and 5. through 14. Table 2. SE2433T Absolute Maximum Ratings (Note 1) Parameter Symbol Minimum Maximum Units Supply voltage VCC 0.3 3.6 V Control pin voltages 0.3 3.6 V Operating temperature TOP 0.3 85 C Storage temperature TSTG 40 125 C PIN MAX TX input power 40 +6 dBm Electrostatic discharge: ESD Human Body Model (HBM), Class 1B 500 V Note 1: Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device. CAUTION: Although this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device. This device must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times. Skyworks Solutions, Inc. Phone 781 376-3000 Fax 781 376-3100 sales skyworksinc.com www.skyworksinc.com 2 October 7, 2015 Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice 202411F