DATA SHEET SKY13290-313LF: 20 MHz-2.5 GHz, 10 W pHEMT SPDT Switch Applications Transmit/receive switching for telematic systems at elevated power levels Features Broadband frequency range: 20 MHz to 2.5 GHz Very low insertion loss, 0.4 dB typical 0.9 GHz High isolation: 26 dB typical 0.9 GHz High input power compression: 0.1 dB > +40 dBm Low current consumption: <100 A 3 V Figure 1. SKY13290-313LF Block Diagram Ultra-miniature, QFN (6-pin, 2 x 3 mm) package (MSL1, 260 C per JEDEC J-STD-020) Description The SKY13290-313LF is a high power, pHEMT Single Pole Double Throw (SPDT) switch. The switch is designed for use in systems operating from 20 MHz to 2.5 GHz for which low loss, high isolation, low control voltage, and ultra-miniature package size are required. The device is controlled with positive, negative, or a combination of both voltages. The RF signal paths within the device are fully bilateral. The SKY13290-313LF is manufactured in a compact, low-cost 2 x 3 mm, 6-pin Quad Flat No-Lead (QFN) package. A functional block diagram is shown in Figure 1. The pin configuration and package are shown in Figure 2. Signal pin assignments and functional pin descriptions are provided in Table 1. Figure 2. SKY13290-313LF Pinout 6-Pin QFN (Top View) Skyworks Solutions, Inc. Phone 781 376-3000 Fax 781 376-3100 sales skyworksinc.com www.skyworksinc.com 200488G Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice March 11, 2013 1 DATA SHEET SKY13290-313LF SPDT SWITCH Table 1. SKY13290-313LF Signal Descriptions Pin Name Description Pin Name Description 1 J2 RF input/output. According to the logic 4 V2 DC control voltage input 2. The logic voltage levels applied to the V1 and V2 pins, voltage applied to this pin, along with the this port is either connected to J1 using a voltage level applied to the V1 pin, low insertion loss path or isolated from J1 determines the states of the RF paths (Note 1). between J1/J2 and J1/J3. 2 GND Ground. Equipotential port, internal circuit 5 J1 RF input/output. According to the logic common, which must connected to the PCB voltage levels applied to the V1 and V2 pins, ground or common using the lowest this port is either connected to J2 or to J3 possible impedance. using a low insertion loss path and isolated from the other RF port (Note 1). 3 J3 RF input/output. According to the logic 6 V1 DC control voltage input 1. The logic voltage levels applied to the V1 and V2 pins, voltage applied to this pin, along with the this port is either connected to J1 using a voltage level applied to the V2 pin, low insertion loss path or isolated from J1 determines the states of the RF paths (Note 1). between J1/J2 and J1/J3. Note 1: A 47 pF blocking capacitor is required for >500 MHz operation. Use larger value capacitors for lower frequency operation. Table 2. SKY13290-313LF Absolute Maximum Ratings Parameter Symbol Minimum Maximum Units Control voltage VCTL 0 +10 V RF input power (VCTL > 0.9 GHz) PIN +43.5 dBm Operating temperature TOP 40 +85 C Storage temperature TSTG 65 +150 C Electrostatic Discharge, Human Body Model (HBM), Class 1A 250 V Note: Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters set at or below their nominal value. CAUTION: Although this device is designed to be as robust as possible, Electrostatic Discharge (ESD) can damage this device. This device must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times. Technical Description Electrical and Mechanical Specifications The SKY13290-313LF is controlled using two voltage inputs, V1 The absolute maximum ratings of the SKY13290-313LF are and V2 (pins 6 and 4, respectively). Depending on the voltage level provided in Table 2. Electrical specifications are provided in applied to these pins, the common RF port (J1) is connected to Table 3 and the operating characteristics are specified in Table 4. one of two RF ports (J2 or J3) using a low insertion loss path, Typical performance characteristics of the SKY13290-313LF are while the path between J1 and the other RF port is in its isolation illustrated in Figures 3 through 6. state. The state of the SKY13290-313LF is determined by the logic When the control voltages are toggled, the states between J1 and provided in Table 5. J2, as well as J1 and J3, are also toggled. Skyworks Solutions, Inc. Phone 781 376-3000 Fax 781 376-3100 sales skyworksinc.com www.skyworksinc.com 2 March 11, 2013 Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice 200488G