DATA SHEET SKY13306-313LF: GaAs SPDT Switch 100 MHz6 GHz Features Functional Block Diagram Broadband: 100 MHz 6 GHz J 1 6 V 2 1 Very low insertion loss: 0.5 dB typ. 2.42.5 GHz High linearity: IIP3 = 53 dBm typ. 3 V GND 2 5 J 1 Low current consumption: <50uA 3 V Miniature QFN-6 2 x 3 mm package 3 4 J V 3 2 Lead (Pb)-free and RoHS-compliant MSL1 260 C per JEDEC J-STD-020 Description The SKY13306-313LF is an IC FET SPDT switch in a low-cost miniature QFN- 6 plastic package. The SKY13306-313LF features low insertion loss, excellent linearity and positive voltage operation with very low DC power consumption. This general purpose switch can be used in a variety of telecommunications applications, and was designed for use as a transmit-receive switch for WLAN appli- cations such as 802-11a/b/g. The QFN-6 package is lead (Pb)-free and meets all current requirements for RoHS. NEW Skyworks offers lead (Pb)-free, RoHS (Restriction of Hazardous Substances)-compliant packaging. Product is in development stages, performance is based on simulation, and pin out and package are advanced and may change. Skyworks Solutions, Inc. Phone 781 376-3000 Fax 781 376-3100 sales skyworksinc.com www.skyworksinc.com 200745 Rev. C Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice. April 11, 2008 1DATA SHEET SKY13306-313LF Electrical Specifications T = 25 C, V = 0/3 V, Z = 50 , unless otherwise noted CTL O Parameter Condition Frequency Min. Typ. Max. Unit Insertion loss J J , J J 0.10 GHz6.00 GHz 0.6 0.9 dB 1 2 1 3 2.40 GHz2.50 GHz 0.5 0.7 dB 3.40 GHz3.60 GHz 0.5 0.7 dB 5.15 GHz5.85 GHz 0.6 0.8 dB Isolation J J , J J 0.10 GHz6.00 GHz 21 25 dB 1 2 1 3 2.40 GHz2.50 GHz 22 25 dB 3.40 GHz3.60 GHz 23 26 dB 5.15 GHz5.85 GHz 21 24 dB Return loss Insertion loss state 0.10 GHz6.00 GHz 15 dB 2.40 GHz2.50 GHz 25 dB 3.40 GHz3.60 GHz 16 dB 5.15 GHz5.85 GHz 15 dB Input power for 0.1 dB compression 2.4 GHz2.5 GHz 35 dBm 2nd Harmonic P = 22 dBm 2.45 GHz -70 dBc IN 3rd Harmonic P = 22 dBm 2.45 GHz -68 dBc IN Input 3rd order intercept point Two tones, 15 dBm each tone, 5 MHz spacing 5.2 GHz 53 dBm Control voltage V 2.7 5V HIGH V -0.25 0.25 V LOW Control port current V = 3 V 10 100 A CTL V = 5 V 15 200 A CTL V = 0 V 10 50 A CTL Absolute Maximum Ratings Truth Table (1) (1) V V J J J J 1 2 1 2 1 3 Characteristic Value 0VHIGH Isolation Insertion loss RF input power 0,5 V 36.5 dBm 25 C VHIGH 0 Insertion loss Isolation RF input power 0,3 V 36 dBm 25 C All other conditions not recommended. No damage to the switch will occur if a non- Control voltage -0.2 V < V < 6 V recommended combination of control voltages is present. The switch will not provide full CTL isolation or minimum insertion loss under such conditions. Operating temperature range -40 C to +85 C 1. 2.7 V < V < 5 V. HIGH Storage temperature range -65 C to +150 C Performance is guaranteed only under the conditions listed in the specifications table and is not guaranteed under the full range(s) described by the Absolute Maximum specifications. Exceeding any of the absolute maximum/minimum specifications may result in permanent Recommended Solder Reflow Profiles damage to the device and will void the warranty. Refer to the Recommended Solder Reflow Profile Application Note. CAUTION: Although this device is designed to be as robust as possible, ESD (Electrostatic Discharge) can damage this device. This device must be protected at all times Tape and Reel Information from ESD. Static charges may easily produce poten- Refer to the Discrete Devices and IC Switch/Attenuators tials of several kilovolts on the human body or Tape and Reel Package Orientation Application Note. equipment, which can discharge without detection. Industry-standard ESD precautions must be employed at all times. Skyworks Solutions, Inc. Phone 781 376-3000 Fax 781 376-3100 sales skyworksinc.com www.skyworksinc.com 2 April 11, 2008 Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice. 200745 Rev. C