DATA SHEET SKY13351-378LF: 20 MHz to 6.0 GHz GaAs SPDT Switch Applications WLAN 802.11 a/b/g/n networks INPUT WLAN repeaters ISM band radios OUTPUT1 OUTPUT2 Low power transmit receive systems Features Positive voltage control (0 and 1.8 V to 0 and 5.0 V) 201132-001 Broadband frequency range: 20 MHz to 6.0 GHz VCTL1 VCTL2 Very low insertion loss, 0.35 dB typical 2.45 GHz Figure 1. SKY13351-378LF Block Diagram High isolation, 24 dB typical 2.45 GHz Excellent linearity performance, IP0.5dB = +30 dBm Description Ultra-miniature, MLPD (6-pin, 1 x 1 mm) package The SKY13351-378LF is a pHEMT GaAs FET I/C switch. The (MSL1, 260 C per JEDEC J-STD-020) switch may be used in transmit/receive applications by connecting the RF common port (INPUT, pin 5) to either the TM Skyworks Green products are compliant with OUTPUT1 or OUTPUT2 port (pin 1 or 3, respectively) using a low all applicable legislation and are halogen-free. loss path (i.e., a positive voltage applied to either VCTL1 or VCTL2 For additional information, refer to Skyworks pins). The switch is reflective short on the isolated port. TM Denition of Green , document number The switch is manufactured in a compact, 1 x 1 mm, 6-pin SQ040074. exposed pad plastic Micro Leadframe Package Dual (MLPD) package. A functional block diagram is shown in Figure 1. The pin configuration and package are shown in Figure 2. Signal pin assignments and functional pin descriptions are provided in Table 1. OUTPUT1 1 6 VCTL1 GND INPUT 2 5 OUTPUT2 3 4 VCTL2 S1482 Figure 2. SKY13351-378LF Pinout (Top View) Skyworks Solutions, Inc. Phone 781 376-3000 Fax 781 376-3100 sales skyworksinc.com www.skyworksinc.com 201132I Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice September 8, 2017 1 DATA SHEET SKY13351-378LF: 20 MHz TO 6.0 GHz GaAS SPDT SWITCH Table 1. SKY13351-378LF Signal Descriptions Pin Name Description Pin Name Description 1 OUTPUT1 RF port. Must be DC blocked. 4 VCTL2 DC control voltage 2 GND Ground 5 INPUT RF port. Must be DC blocked 3 OUTPUT2 RF port. Must be DC blocked. 6 VCTL1 DC control voltage Electrical and Mechanical Specifications The absolute maximum ratings of the SKY13351-378LF are Typical performance characteristics of the SKY13351-378LF are provided in Table 2. The recommended operating conditions are illustrated in Figures 3 through 9. specified in Table 3 and electrical specifications are provided in The state of the SKY13351-378LF is determined by the logic Table 4. provided in Table 5. 1 Table 2. SKY13351-378LF Absolute Maximum Ratings Parameter Symbol Minimum Maximum Units Input power: PIN >500 MHz, 5 V, CW +32 dBm >500 MHz, 2.7 V, CW +31 dBm 802.11g, 54 Mbps, 64 QAM, 2.4-2.5 GHz +26 dBm 802.11g, 54 Mbps, 64 QAM, 5.2-5.8 GHz +25 dBm Storage temperature TSTG 65 +150 C Operating temperature TOP 40 +85 C 1 Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device. ESD HANDLING: Although this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device. This device must be protected at all times from ESD when handling or transporting. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD handling precautions should be used at all times. Table 3. SKY13351-378LF Recommended Operating Conditions Parameter Symbol Min Typ Max Units Frequency f 0.02 6.0 GHz Control voltage: low VCTL L 0 0.2 V high VCTL H 1.8 5.0 V Operating temperature TOP +25 C Skyworks Solutions, Inc. Phone 781 376-3000 Fax 781 376-3100 sales skyworksinc.com www.skyworksinc.com 2 September 8, 2017 Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice 201132I