DATA SHEET SKY13366-378LF: 2.0 to 6.0 GHz GaAs SPDT Switch Applications WLAN 802.11 a/b/g/n networks WLAN repeaters INPUT ISM band radios Low power transmit receive systems OUTPUT2 OUTPUT1 Features Positive voltage control (0 and 1.8 V to 0 and 5.0 V) Broadband frequency range: 2.0-6.0 GHz 201244-001 Very low insertion loss, 0.35 dB typical 2.45 GHz VCTL1 VCTL2 High isolation, 24 dB typical 2.45 GHz Excellent linearity performance, IP0.5dB = +30 dBm Figure 1. SKY13366-378LF Block Diagram Ultra-miniature, MLPD (6-pin, 1 x 1 mm) package (MSL1, 260 C per JEDEC J-STD-020) Description The SKY13366-378LF is a pHEMT GaAs FET I/C switch. The switch may be used in transmit/receive applications by TM Skyworks Green products are compliant with connecting the RF common port (INPUT, pin 5) to either the all applicable legislation and are halogen-free. OUTPUT1 or OUTPUT2 port (pin 1 or 3, respectively) using a low For additional information, refer to Skyworks loss path (i.e., a positive voltage applied to either VCTL1 or VCTL2 TM Denition of Green , document number pins). The switch is reflective short on the isolated port. SQ040074. The switch is manufactured in a compact, 1 x 1 mm, 6-pin exposed pad plastic Micro Leadframe Package Dual (MLPD) package. A functional block diagram is shown in Figure 1. The pin configuration and package are shown in Figure 2. Signal pin assignments and functional pin descriptions are provided in Table 1. OUTPUT1 1 6 VCTL1 GND INPUT 2 5 3 4 OUTPUT2 VCTL2 201244-002 Figure 2. SKY13366-378LF Pinout (Top View) Skyworks Solutions, Inc. Phone 781 376-3000 Fax 781 376-3100 sales skyworksinc.com www.skyworksinc.com 201244C Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice August 3, 2017 1 DATA SHEET SKY13366-378LF: 2.0 TO 6.0 GHz GaAS SPDT SWITCH Table 1. SKY13366-378LF Signal Descriptions Pin Name Description Pin Name Description 1 OUTPUT1 RF port. Must be DC blocked. 4 VCTL2 DC control voltage 2 GND Ground 5 INPUT RF port. Must be DC blocked 3 OUTPUT2 RF port. Must be DC blocked. 6 VCTL1 DC control voltage 1 Table 2. SKY13366-378LF Absolute Maximum Ratings Parameter Symbol Minimum Typical Maximum Units Input power: PIN >500 MHz, 5 V, CW +32 dBm >500 MHz, 2.7 V, CW +31 dBm 802.11g, 54 Mbps, 64 QAM, 2.4-2.5 GHz +26 dBm 802.11g, 54 Mbps, 64 QAM, 5.2-5.8 GHz +25 dBm Storage temperature TSTG 65 +150 C Operating temperature TOP 40 +85 C 1 Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device. ESD HANDLING: Although this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device. This device must be protected at all times from ESD when handling or transporting. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD handling precautions should be used at all times. Table 3. SKY13366-378LF Recommended Operating Conditions Parameter Symbol Minimum Typical Maximum Units Frequency f 2.0 6.0 GHz Control voltage: low VCTL L 0 0.2 V high VCTL H 1.8 5.0 V Operating temperature TOP +25 C Electrical and Mechanical Specifications The absolute maximum ratings of the SKY13366-378LF are Typical performance characteristics of the SKY13366-378LF are provided in Table 2. The recommended operating conditions are illustrated in Figures 3 through 9. specified in Table 3 and electrical specifications are provided in The state of the SKY13366-378LF is determined by the logic Table 4. provided in Table 5. Skyworks Solutions, Inc. Phone 781 376-3000 Fax 781 376-3100 sales skyworksinc.com www.skyworksinc.com 2 August 3, 2017 Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice 201244C