DATA SHEET SKY13585-679LF: 1.0 to 6.0 GHz SPDT Switch INPUT Applications WLAN 802.11 a/b/g/n/ac networks OUTPUT2 OUTPUT1 WLAN repeaters ISM band radios Low power transmit receive systems Smartphones Connectivity modules 203458-001 VDD VCTL Features Figure 1. SKY13585-679LF Block Diagram Broadband frequency range: 1.0 to 6.0 GHz Low insertion loss, 0.5 dB typical 2.45 GHz Description High isolation, 38 dB typical 2.45 GHz The SKY13585-679LF is a single-pole, double-throw (SPDT) switch intended for mode switching in WLAN applications. Using Excellent linearity performance, IP0.1dB = +31 dBm advanced switching technologies, the SKY13585-679LF Single control logic maintains low insertion loss and high isolation for all switching 1.8 V and 3.3 V logic compatibility paths. Wide 3 to 5 V supply voltage range The high-linearity performance and low insertion loss achieved by the switch make it an ideal choice for low-power transmit/receive Integrated DC blocking capacitors applications. Depending on the logic voltage applied to the control Ultra-miniature, MLPD (6-pin, 1 1 0.32 mm) package pin (VCTL), the INPUT pin is connected to one of the two switched (MSL1, 260 C per JEDEC J-STD-020) RF outputs (OUTPUT1 or OUTPUT2) using a low insertion loss path, while the path between the INPUT pin and the other OUTPUT pin is in a high-isolation state. The switch isreflective shor on TM Skyworks Green products are compliant with the isolated port. all applicable legislation and are halogen-free. The SKY13585-679LF has integrated DC blocking capacitors, so For additional information, refer to Skyworks TM no external DC blocking capacitors are required. Denition of Green , document number SQ040074. The switch is manufactured in a compact, 1 1 0.32 mm, 6-pin exposed pad plastic Micro Lead-frame Package Dual (MLPD) package. A functional block diagram is shown in Figure 1. The pin OUTPUT1 1 6 VDD configuration and package are shown in Figure 2. Signal pin assignments and functional pin descriptions are provided in Table 1. GND 2 5 INPUT OUTPUT2 3 4 VCTL 203458-002 Figure 2. SKY13585-679LF Pinout (Top View) Skyworks Solutions, Inc. Phone 781 376-3000 Fax 781 376-3100 sales skyworksinc.com www.skyworksinc.com 203458G Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice May 9, 2017 1 DATA SHEET SKY13585-679LF: 1.0 TO 6.0 GHz SPDT SWITCH Table 1. SKY13585-679LF Signal Descriptions Pin Name Description Pin Name Description 1 OUTPUT1 RF port 4 VCTL DC control voltage 2 GND Ground 5 INPUT RF port 3 OUTPUT2 RF port 6 VDD DC supply voltage Electrical and Mechanical Specifications The absolute maximum ratings of the SKY13585-679LF are The state of the SKY13585-679LF is determined by the logic provided in Table 2. The recommended operating conditions are provided in Table 5. Typical performance characteristics are specified in Table 3, and electrical specifications are provided in shown in Figures 3 through 6. Table 4. 1 Table 2. SKY13585-679LF Absolute Maximum Ratings Parameter Symbol Minimum Maximum Units Input power PIN +32 dBm Supply voltage VDD 5.5 V Control voltage VCTL 3.7 V Storage temperature TSTG 65 +150 C Operating temperature TOP 40 +90 C 1 Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device. ESD HANDLING: Although this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device. This device must be protected at all times from ESD when handling or transporting. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD handling precautions should be used at all times. Table 3. SKY13585-679LF Recommended Operating Conditions Parameter Symbol Minimum Typical Maximum Units Operating frequency fo 1.0 6.0 GHz Supply voltage VDD 2.7 3.3 5 V Control voltage: Low VCTL L 0 0.4 V High VCTL H 1.6 3.6 V Operating temperature TOP +25 C Skyworks Solutions, Inc. Phone 781 376-3000 Fax 781 376-3100 sales skyworksinc.com www.skyworksinc.com 2 May 9, 2017 Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice 203458G