DATA SHEET SKY13588-460LF: 0.1 to 6.0 GHz SP3T Switch Applications WCDMA band and mode switching J3 Antenna switch for multimode systems 802.11a/b/g/n WLANs Industrial IoT Lighting Smart energy J2 RFC Connected home Features 203512-001 Broadband frequency range: 0.1 to 6.0 GHz J1 Low insertion loss: 0.45 dB 2.5 GHz Figure 1. SKY13588-460LF Block Diagram High isolation: 30 dB up to 2.5 GHz No external DC blocking capacitors required Description Positive low voltage control: VCTL = 1.65 to 3.00 V, VDD = 2.5 to 4.8 V The SKY13588-460LF is a CMOS silicon-on-insulator (SOI), Operating temperature range: -40 C to +105 C single-pole, triple-throw (SP3T) switch. The high-linearity performance and low insertion loss makes the device an ideal Small QFN (12-pin, 2 2 0.55 mm) package choice for WCDMA handset and data card applications. (MSL1, 260 C per JEDEC J-STD-020) The SKY13588-460LF SP3T switch is provided in a compact Quad Flat No-Lead (QFN) 2 2 0.55 mm package. A functional block TM Skyworks Green products are compliant with diagram is shown in Figure 1. The pin configuration and package all applicable legislation and are halogen-free. are shown in Figure 2. Signal pin assignments and functional pin For additional information, refer to Skyworks descriptions are provided in Table 1. TM Denition of Green , document number SQ040074. 12 11 10 J1 1 9 J2 GND 2 8 GND 3 7 J3 GND 45 6 203512-002 Figure 2. SKY13588-460LF Pinout (Top View) Skyworks Solutions, Inc. Phone 781 376-3000 Fax 781 376-3100 sales skyworksinc.com www.skyworksinc.com 203512D Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice July 7, 2017 1 V1 GND V2 RFC VDD GNDDATA SHEET SKY13588-460LF: SP3T SWITCH 1 Table 1. SKY13588-460LF Signal Descriptions Pin Name Description Pin Name Description 1 J1 RF port 1. 7 GND Ground 2 GND Ground 8 GND Ground 3 J3 RF port 3. 9 J2 RF port 2 4 V1 DC control voltage 1 (see Table 4) 10 GND Ground 5 V2 DC control voltage 2 (see Table 4) 11 RFC RF common (antenna) port 6 VDD DC power supply. 12 GND Ground 1 Exposed pad must be grounded. Functional Description Electrical and Mechanical Specifications The SKY13588-460LF includes an internal negative voltage The absolute maximum ratings of the SKY13588-460LF are generator and decoder that eliminate the need for external DC provided in Table 2. Electrical specifications are provided in blocking capacitors on the RF ports. No external components are Table 3. required for proper operation. DC decoupling capacitors can be The state of the SKY13588-460LF is determined by the logic added on the VDD and control lines if necessary. provided in Table 4. Switching is controlled by two control voltage inputs (V1 and V2). Typical performance characteristics of the SKY13588-460LF are Depending on the logic voltage level applied to the control pins, illustrated in Figures 3 through 6. the RFC (RF common) pin is connected to one of three switched RF outputs (J1, J2, or J3) through a low insertion path, while the path between the RFC pin and the other RF pins is in a high isolation state. Shutdown mode is enabled by connecting all control pins to logic low. This mode reduces the overall current consumption of the device to 5 A, typical. To prevent the switch from accidentally entering shutdown mode during switching, all states must be set to logic low for at least 20 s. When exiting shutdown mode, the switch has a 10.5 s startup time before switching occurs. 1 Table 2. SKY13588-460LF Absolute Maximum Ratings Parameter Symbol Minimum Maximum Units Supply voltage VDD 2.5 4.8 V 2 Control voltage VCTL 1.65 3.30 V Input power PIN +39 dBm Storage temperature TSTG -40 +125 C Operating temperature TOP -40 +105 C 1 Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device. 2 Any bias voltage applied to the V1or V2 pin may damage the device if there is no bias voltage also present on the VDD pin. Maximum control voltage cannot exceed VDD. ESD HANDLING: Although this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device. This device must be protected at all times from ESD when handling or transporting. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD handling precautions should be used at all times. Skyworks Solutions, Inc. Phone 781 376-3000 Fax 781 376-3100 sales skyworksinc.com www.skyworksinc.com 2 July 7, 2017 Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice 203512D