PRODUCT SUMMARY SKY65903-11: Low-Noise Amplifier Front-End Module with GPS/GNSS/BDS Pre- and Post-Filters Applications GPS/GNSS/BDS radio receivers Bias/Enable Global Navigation Satellite Systems (GLONASS) Cellular phones Input Output RF IN RF OUT LNA Match Match Table/laptop PCs S3590 Personal navigation devices Figure 1. SKY65903-11 Block Diagram Features Description Small signal gain: 14.2 dB The SKY65903-11 is a front-end module (FEM) with an integrated In-band IIP3: 7.3 dBm low-noise amplifier (LNA), and pre- and post-filters designed for Low noise figure: 1.7 dB Global Positioning System/Global Navigation Satellite System/Beidou Navigation Satellite System (GPS/GNSS/BDS) Low current consumption receiver applications. The device provides high linearity, excellent Input/output impedance internally matched to 50 gain, and a low noise figure (NF). Single DC supply: 1.8 V The pre- and post-filters provide low in-band insertion loss and No external SMT required excellent rejection for the cellular, PCS, and WLAN frequency bands. Small, MCM (16-pin, 2.5 x 2.5 mm) package (MSL1, 260 C per JEDEC J-STD-020) The SKY65903-11 uses surface-mount technology (SMT) in the form of a 2.5 x 2.5 mm Multi-Chip Module (MCM) package, which TM allows for a highly manufacturable and low-cost solution. Skyworks Green products are compliant with all applicable legislation and are halogen-free. A functional block diagram is shown in Figure 1. For additional information, refer to Skyworks TM Denition of Green , document number SQ040074. Skyworks Solutions, Inc. Phone 781 376-3000 Fax 781 376-3100 sales skyworksinc.com www.skyworksinc.com 203443A Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice February 5, 2015 1 VEN VDDPRODUCT SUMMARY SKY65903-11: LOW-NOISE AMPLIFIER FEM WITH GPS/GNSS/BDS PRE- AND POST-FILTERS Ordering Information Model Name Manufacturing Part Number Evaluation Board Part Number SKY65903-11: Low-Noise Amplifier FEM with GPS/GNSS/BDS Pre- and Post-Filters SKY65903-11 TW21-D730 Copyright 2015 Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. (Skyworks) products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks and the Skyworks symbol are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference. Skyworks Solutions, Inc. Phone 781 376-3000 Fax 781 376-3100 sales skyworksinc.com www.skyworksinc.com 2 February 5, 2015 Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice 203443A