PRODUCT SUMMARY SKY65367-11: 169 to 170 MHz Transmit/Receive Front-End Module Applications Description The SKY65367-11 is a high performance, transmit/receive (T/R) Automated meter reading Front-End Module (FEM). The device includes a Power Amplifier Advanced metering infrastructure (PA) capable of more than +30 dBm of transmit output power ISM systems (VCC = 3.6 V) at more than 43 percent PAE for the module (63 percent for the standalone PA). For current-sensitive applications, the PA can be bypassed to save battery current. Features All functionality can be controlled by a three-wire interface. The Transmit output power: >+30 dBm FEM can be placed in a deep sleep mode, drawing less than 1 A of current. High efficiency PA The receive chain consists of a low-loss Single-Pole, Triple-Throw Receive loss: < 0.4 dB (SP3T) switch, which provides an insertion loss of approximately Transmit bypass mode with 0.9 dB insertion loss 0.4 dB. Three separate VCC pins enable maximum RF isolation. Sleep mode current: < 1 A The SKY65367-11 is packaged in a 16-pin, 4 x 4 mm Multi-Chip Integrated control logic Module (MCM), which allows for a highly manufacturable low-cost solution. Small footprint MCM (16-pin, 4 x 4 mm) package (MSL3, 260 C per JEDEC J-STD-020) A functional block diagram of the SKY65367-11 is shown in Figure 1. Skyworks Green products are compliant with all applicable legislation and are halogen-free. For additional information, refer to Skyworks Denition of Green, document number SQ04-0074. Output Matching Network PA OUT TX IN Logic Control TX PA SPST Regulator Filter ANT RX SP3T S2743 Figure 1. SKY65367-11 FEM Block Diagram Skyworks Solutions, Inc. Phone 781 376-3000 Fax 781 376-3100 sales skyworksinc.com www.skyworksinc.com 201956F Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice November 26, 2013 1 CSD L CTX CBYP LPRODUCT SUMMARY SKY65367-11 T/R FEM Ordering Information Model Name Manufacturing Part Number Evaluation Board Part Number SKY65367-11 T/R FEM SKY65367-11 SKY65367-11-EK1 Copyright 2012-2013 Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. (Skyworks) products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks, the Skyworks symbol, Helios, and Breakthrough Simplicity are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference. Skyworks Solutions, Inc. Phone 781 376-3000 Fax 781 376-3100 sales skyworksinc.com www.skyworksinc.com 2 November 26, 2013 Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice 201956F