PRODUCT SUMMARY SKY85302-11: 2.4 GHz, 256 QAM WLAN/Bluetooth Front-End Module Applications WiFi-enabled smartphones, tablets, and mobile/portable devices System-in-Package (SIP) modules for embedded systems TX Features Integrated high performance 2.4 GHz PA, harmonic filter, LNA BT with bypass, and T/R switch ANT Fully-matched input and output LNA with integrated bypass mode High performance SP3T switch to support Bluetooth/WiFi RX LNA functions Transmit loopback mode Integrated positive slope power detector S2343 Transmit gain: 26 dB Figure 1. SKY85302-11 Block Diagram Receive gain: 14 dB Output power: +18 dBm 1.8% EVM, MCS8 Description +19 dBm 3% EVM, 54 Mbps The SKY85302-11 is a complete 802.11ac WLAN RF Front-End +23 dBm, 802.11b mask compliant Module (FEM) with a Bluetooth port. The device provides all the Direct connection to battery with 3.6 V nominal supply functionality of a fully matched Power Amplifier (PA), power detector, harmonic filter, Low-Noise Amplifier (LNA), and Single- Small, QFN (16-pin, 2.5 x 2.5 mm) package (MSL1, 260 C per Pole, Triple-Throw (SP3T) switch. JEDEC J-STD-020) The SKY85302-11 provides a complete 2.4 GHz WLAN RF solution from the output of the transceiver to the antenna, and from the Skyworks Pb-free products are compliant with antenna to the input of the transceiver. The LNA increases the all applicable legislation. For additional receive sensitivity of embedded solutions to improve range or to information, refer to Skyworks Denition of overcome the insertion loss of cellular filters (often included for Lead (Pb)-Free, document number SQ04-0073. mobile applications). The SKY85302-11 also includes a transmitter power detector with 20 dB of dynamic range, and a digital enable control for transmitter power ramp on/off control. The device is provided in an ultra- compact, 16-pin 2.5 x 2.5 mm Quad Flat No-Lead (QFN) package. A functional block diagram is shown in Figure 1. Skyworks Solutions, Inc. Phone 781 376-3000 Fax 781 376-3100 sales skyworksinc.com www.skyworksinc.com 202750B Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice September 18, 2013 1 VDET PEN LEN CRX CBTPRODUCT SUMMARY SKY85302-11 FRONT-END MODULE Ordering Information Model Name Manufacturing Part Number Evaluation Board Part Number SKY85302-11 2.4 GHz Front-End Module SKY85302-11 SKY85302-11-EVB Copyright 2013 Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. (Skyworks) products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks, the Skyworks symbol, and Breakthrough Simplicity are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference. Skyworks Solutions, Inc. Phone 781 376-3000 Fax 781 376-3100 sales skyworksinc.com www.skyworksinc.com 2 September 18, 2013 Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice 202750B