CENB1020 Universal 20 Watt Series ITE Switch-Mode Power Supply 3 Year Warranty 100-240VAC Universal Input Range Meets EISA2007, CEC Efficiency Level V, EU (EC) No 278/2009 Phase II Desktop & Wall Plug Styles 5V to 48V Single Output Models, up to 19W Modified and Custom Designs Available Regulated Output with Low Ripple Impact-Resistant Polycarbonate Enclosure No load Power Consumption <0.3W Limited Power Source nd Certified to UL/EN60950-1, 2 Edition RoHS LLPPSS LLPPSS Specifications All Specifications are typical at nominal input, full load at 25C unless otherwise stated. MTBF 100,000 hours (calculated) AC Input 100-240Vac, -/-10%, 47-63 Hz, 1 Input Current 100Vac: 0.45A Hold-up Time 18 ms min. 115Vac, 60 ms min. 230 Vac Inrush Current Inrush limiting provided, 60 A peak Overload Protection Hiccup Mode Input Fuse Internal Primary Current Fuse provided: 3.15A, 250Vac Short Circuit Protection Hiccup Mode Efficiency Meets EISA2007, CEC Efficiency Level V, Topology Switching Fixed Frequency Flyback EU (EC) No 278/2009 Phase II nd Output Voltage See chart Safety Standards EN/IEC/CSA/UL60950-1, 2 Edition, LPS Output Power See chart EMC, Radiated & Conducted See chart below Ripple and Noise 1% pk-pk max., 20MHz BW Dielectric Withstand Input-Output: 4,242VDC, Input-Ground: 1,500Vac, Output-Ground: 500Vdc Line & Load Voltage Regulation Line: +/- 1%, Load: +/-5% Operating Temperature 0 to 40C, no derating Minimum Load Not required Storage Temperature -30 to +85C Transient Response 500 us max, 50% load step Relative Humidity 5% to 95%, non-condensing Case Dimensions 84 X 47 X 32mm. See outline drawing Altitude 0 to 10,000 ft Case Material Black 94V0 Polycarbonate Turn-on Time 2 sec max, 115/230 Vac Weight 150g Output Cable 5V 9V outputs: 18AWG (SPT-1), 1500mm, 2 conductor 12V 48V outputs: 20AWG (UL1185), 1500mm, 2 conductor Output Connector 2.5mm barrel type (Ault 3), center contact (+) EMC Specifications Conducted Emissions EN55022 Class B, FCC Part 15, Class B. Radiated Emissions EN55022 Class B, FCC Part 15, Class B. Line Frequency Harmonics EN61000-3-2, Class A Voltage Fluctuations/Flicker EN61000-3-3 Static Discharge Immunity EN61000-4-2, 6kV Contact Discharge, 8kV air discharge Radiated RF Immunity EN61000-4-3, 3V/m. EFT/Burst Immunity EN61000-4-4, 2kV/5kHz. Line Surge Immunity EN61000-4-5, 1kV differential, 2kV common-mode Conducted RF Immunity EN61000-4-6, 3Vrms Power Frequency Magnetic Field Immunity EN61000-4-8, 3A/m Voltage Dip Immunity EN61000-4-11, Criteria B 1 of 2 SL Power Electronics Corp 6050 King Drive Ventura, CA 93003 Phone 805.486.4565 Fax 858.712.2040 Email: info slpower.com www.slpower.com CENB1020 Universal 20 Watt Series IITTEE SSwwiittcchh MMooddee PPoowweerr SSuuppppllyy 33 Y Yeeaar rW Wararrarnatny ty Model Number Volts (V) Output Current (max) Max Watts Ripple (Vp-p max) CENB1020A0303F01 3.3 V 3.00 A 9.9 W 50 mV CENB1020A0503F01 5 V 3.00 A 15.0 W 50 mV CENB1020A0603F01 6 V 2.50 A 15.0 W 60 mV CENB1020A0703F01 7.5 V 2.00 A 15.0 W 75 mV CENB1020A0903F01 9 V 2.00 A 18.0 W 90mV CENB1020A1203F01 12 V 1.50 A 18.0 W 120mV CENB1020A1403F01 14 V 1.20 A 16.8 W 140mV CENB1020A1503F01 15 V 1.20 A 18.0 W 150mV CENB1020A1803F01 18 V 1.00 A 18.0 W 180mV CENB1020A2403F01 24 V 0.75 A 18.0 W 240mV CENB1020A4803F01 48 V 0.40 A 19.2 W 480mV Notes: Part numbers above include 3 output connector and IEC320 C14 grounded input receptacle. See below for other options. Model Number Key CENB 1 020 A VV 03 F 01 Model01 = Standard. 02 and higher indicates a modified model. Input Connector: = IEC320 C14 grounded, Other options available, see below Output Connector:03 = 2.5mm Barrel Type Connector. Other options available, contact factory. Output Voltage:05 = 5Vdc,12 = 12Vdc,24 = 24Vdc, etc. Model = Original Configuration Output Power:020 = 20 Watts of Outputs1 = Single Output Product Family: = Commercial/ITE/Industrial, = External,N = Model Series Designator AC Input Receptacle Options Output Connector Desktop Wall-Plug IEC320 - C14 IEC320 - C18 IEC320 - C8 N. America N. America Europe United Australia Class I Class II Class II Japan Japan Kingdom Grounded Ungro undedShave Interchangable Fixed Fixed Fixed Fixed (F) (Q) (N) (B) (C) (M) (G) (H) Notes: 1. For desktop options, choose applicable letter above. Notes: 1. Ault 3 Connector, center contact (+). 2. For Wall-Plug options, choose the applicable letter above and the unit w ill be fitted with 2. Connector is Sw itchcraft 760 plug or equivalent. the receptacle chosen. The N. A. blade version (B) w ill be an interchangeable blade. Mating connector is Sw itchcraft 712A or equivalent. The other options (C), (M), (G), and (H) will be fixed blades molded in the case. 3. Other connector options are available. Contact your local 3. Blade Kit is available which will include one each of a EU, UK, and Australian blade. Kit part SL Power Representative for details. is KT1027K. These can be used w ith the (B) version, to allow blades to be changed. Outline Drawing DATE CODE DATE CODE Desktop Style Wall-plug Style (Option B shown) Data Sheet 2010 SL Power Electronics Corp. The information and specifications contained herein are believed to be correct at the time of publication. Rev. 12-22-2010 However, SL Power accepts no responsibility for consequences arising from reproduction errors or inaccuracies. Specifications are subject to change without notice. 2 of 2 SL Power Electronics Corp 6050 King Drive Ventura, CA 93003 Phone 805.486.4565 Fax 858.712.2040 Email: info slpower.com www.slpower.com