CENT1120 Universal 120 Watt Series ITE Switch-Mode Power Supply 3 Year Warranty Universal Input 100Vac 240Vac Single Output Models up to 120W Desktop Style/Non-vented case Efficiency Level IV Power Factor Correction Certified to UL/ EN60950 IPX1 Rated Enclosure Complies with EMI/RFI Regulations Modified and Custom Designs Available Specifications Specifications AC Input 90-264Vac, 47-63 Hz single phase MTBF > 100K hours (calculated, 25C at full load) Input Current 90VAC: 2A, 180VAC: 1.0A Hold-up Time 16.7 ms min. 110VAC Inrush Current Inrush Current Protection Provided Overvoltage Protection Latching Input Fuse Internal Primary Current Fuse Provided Overload Protection >120% of full rated load, Hiccup Mode Earth Leakage Current Input-GND: <3.5mA, Normal State Short Circuit Protection Hiccup Mode, auto-recovery Output-GND: <0.25mA, Normal State Efficiency 88% typical Overtemperature Protection Latching No Load Power <0.5W Output Voltage See chart Input Harmonics Meets IEC61000-3-2, class D Safety Standards IEC/EN/UL60950 Transient Response 5ms return to within 1%, 50% load step. Topology Two-Stage Conversion and Quasi-Resonant Flyback 0.2A/sec slew rate. Maximum deviation is 5% Line/ Load Voltage Regulation Line: +/-2.0% max., Load: +/-5% max Isolation Input-Output: 3000VAC, Input-GND: 1500VAC, Output-GND: 500VDC Minimum Load Not required Operating Temperature 0 to 40C with no derating Ripple and Noise 1% pk-pk max., 20MHz BW, differential mode Temperature Coefficient 0.3% per C, maximum Turn-on Time 3 sec. maximum 115VAC Storage Temperature -20C to +85C Case Material Black 94V-0 rated Polycarbonate Relative Humidity 5% to 95%, non-condensing Case Dimensions/Output Connections See chart and outline drawing Altitude 0 to 10,000 ft, operating -500 to 40,000 ft, non-operating Model Number Key CENT 1 120 A VV 51 F 01 Model01 = Standard. 02 and higher indicates a modified model. Input Connector: = IEC320 C14 grounded, Other options available, see below Output Connector:51 = 6 pin Molex. Other options available. Output Voltage:09 = 9Vdc,12 = 12Vdc,24 = 24Vdc, etc. Model = Original Configuration Output Power:120 = 120 Watts of Outputs1 = Single Output Product Family: = Commercial/ITE/Industrial, = External,N = New Technology 1 of 2 SL Power Electronics Corp 6050 King Drive Ventura, CA 93003 Phone 805.486.4565 Fax 858.712.2040 Email: info slpower.com www.slpower.com CENT1120 Universal 120W Series ITE Switch-Mode Power Supply 3Year Warranty OUTPUT PARAMETERS Model Number Output Volts Output Current (max) Max Watts Ripple (Vp-p max) CENT1120A0951F01 9V 9.00A 81W 90mV CENT1120A1251F01 12V 9.17 A 120W 120mV CENT1120A1551F01 15V 7.33 A 120W 150mV CENT1120A1851F01 18V 6.67 A 120W 180mV CENT1120A2451F01 24V 5.00 A 120W 240mV CENT1120A4851F01 48V 2.50 A 120W 480mV Note: Ripple and Noise is measured with 0.1F ceramic and 10F electrolytic capacitor in parallel, connected at the measurement point. EMI/EMC Compliance Conducted Emissions EN55022 Class B Radiated Emissions EN55022 Class B, FCC Part 15, Class B. Static Discharge Immunity EN61000-4-2, 6kV Contact Discharge, 8kV air discharge Radiated RF Immunity EN61000-4-3, 3V/m. EFT/Burst Immunity EN61000-4-4, 2kV/5kHz.. Line Surge Immunity EN61000-4-5, 1kV differential, 2kV common-mode Conducted RF Immunity EN61000-4-6, 3Vrms Power Frequency Magnetic Field Immunity EN61000-4-8, 3A/m, performance criteria A Voltage Dip Immunity EN61000-4-11, 70% UT for 10mS, 40% UT for 100mS, <5% UT for 5000mS, performance criteria A, B Line Flicker EN61000-3-3 Line Frequency Harmonics EN61000-3-2, Class D Input Receptacle Output Connector (12V model) Output Connector (All other models) IEC320, C14 Class I 3 Connector is 2.5mm barrel type, center (+) 51 Connector is Molex 39-01-2060 or equivalent. Outline Drawing ( 51 connector shown) 167 (6.6) 82 (3.2) 1800+/- 50mm (1000mm on 12V models) 40 (1.6) Data Sheet 2010 SL Power Electronics Corp. The information and specifications contained herein are believed to be correct at the time of publication. Rev. 12-3-2010 However, SL Power accepts no responsibility for consequences arising from reproduction errors or inaccuracies. Specifications are subject to change without notice. 2 of 2 SL Power Electronics Corp 6050 King Drive Ventura, CA 93003 Phone 805.486.4565 Fax 858.712.2040 Email: info slpower.com www.slpower.com