12W Single Output GB10 Family Medical/Industrial Grade FEATURES AND BENEFITS Medical 12W Open Frame Power Supply E-cap Life of >10 Years 1.6 x 3.38 x 1.0 (40.6mm x 85.8mm x 25.4mm) >1,000,000 Hours MTBF Industrial Universal Input 90VAC264VAC 3 Year Warranty Meets Class B Radiated & Conducted EMI, with <0.1W No Load Input Power Mar gin Approved to CSA/EN/IEC/UL62368-1 Meets Heavy Industrial and IEC60601-1-2 th 4 Edition Levels of EMC rd Approved to CSA/EN/IEC/UL60601-1 3 Edition Notes: 1. *Consult factory for compliance information. MODEL SELECTION Model Rated Output Ripple & Line Load Input Output Volts 2 1 Number Current Power Noise Regulation Regulation Class/Termination Termination 75mV GB10S05K01 5.0V 2.0A 10.0W 1% 5% pk-pk 75mV GB10S07K01 7.5V 1.3A 10.0W 1% 5% pk-pk Class I (Grounded) 90mV GB10S09K01 9.0V 1.0A 10.0W 1% 5% input, 3-pin AMP/ 4-pin AMP/Molex type pk-pk Molex type connector connector for K and 120mV Change K to C for C versions GB10S12K01 12.0V 1.0A 12.0W 1% 5% pk-pk Class II input 150mV GB10S15K01 15.0V 0.8A 12.0W 1% 5% pk-pk 240mV GB10S24K01 24.0V 0.5A 12.0W 1% 5% pk-pk Notes: 1. Ripple & noise are measured at 20MHz of bandwidth by using a 12 twisted pair-wire terminated with a 0.1F & 47F parallel capacitor. 2. Other output voltages available, consult factory. 3. All specifications are typical at 230VAC, full load, at 25C ambient unless noted. GB10 Datasheet v0719 Copyright 2019 SL Power Electronics Corp. All rights reserved. Page 112W Single Output GB10 Family Medical/Industrial Grade INPUT OUTPUT Input Voltage and Output Voltage See models chart 100VAC240VAC, 10%, 47Hz63Hz, 1 Frequency 10W12W continuous - See models chart for Output Power Input Current 115VAC: 0.45A, 230VAC: 0.22A specific voltage model ratings Turn On Time <800mS Inrush Current 264VAC, cold start: will not exceed 40A peak 20mS/100VAC at full load, K and C input options Input Fuses 3.15A, 250VAC fuse in both line and neutral Hold-up Time 10mS/100VAC at full load, P input options Earth Leakage Current <500A 264VAC, 60Hz, NC 500s resp. time for return to w/in 0.5% of final (Input to Earth) <1mA 264VAC, 60Hz, SFC value for any 50% load step from 5% to 100% of Transient Response Earth Leakage Current <100A 264VAC, 60Hz, NC rated load, i/t<0.2A/s (Output to Earth) <500A 264VAC, 60Hz, SFC Max voltage deviation is 3.5% Efficiency >88%, typical Total Load Regulation See models chart 0.9min., 230VAC, 80%100% load vector, 25C Notes: Power Factor 1. All specifications are typical at 230VAC input, full load, at 25C ambient unless noted. ambient Notes: 1. All specifications are typical at 230VAC input, full load, at 25C ambient unless noted. ISOLATION Input-Output: 4000VAC (2 MOPP) RELIABILITY Isolation Input-Ground: 1500VAC (1 MOPP) Output-Ground: 1500VAC (1 MOPP) >1,000,000 hours, full load, 110VAC & 220VAC input, MTBF Isolation Resistance I/P-O/P, I/P-FG, O/P-FG: TBD 25C amb., per telcordia 332 issue 6, stress method >10 year life based on calculations at 115VAC/60Hz E-cap Life & 230V AC/50Hz, ambient 25C at 24 hrs/day, 365 days/year, 6 power up cycles/day PROTECTION Will shutdown upon an overtemperature Overtemperature Protection condition, Auto-recovery SAFETY 130% to 160% of rated output current value, Overload Protection Hiccup mode ITE/Industrial Safety EN/IEC/UL62368-1 rd Short Circuit Protection Hiccup mode Medical Safety EN/IEC/UL60601-1 3 Edition 120% to 150% of nominal output voltage, Overvoltage Protection Hiccup Mode GB10 Datasheet v0719 Copyright 2019 SL Power Electronics Corp. All rights reserved. Page 2