60W Single Output GB60 Family Medical & Industrial Grade FEATURES AND BENEFITS Industrial 2 X 3 X 1.063 Package Approved To CSA/EN/IEC/UL6 2368-1 For 1U Applications Level V Efficiency Compliant Models LED 60W Convection Cooled <0.5W No-Load Power Consumption Universal Input 90VAC264VAC 3 Years Warranty Optional Power On LED RoHS Compliant MODEL SELECTION Output Current Output Power Ripple & Total Model Number* Volts Total Threshold Convection Cooled Convection Cooled Noise** Regulation 120mV 14.4VDC18VDC GB60S12K 12V 4.58A 55W 2% pk-pk 150mV 18VDC22.5VDC GB60S15K 15V 4.00A 60W 2% pk-pk 240mV 28.8VDC36VDC GB60S24K 24V 2.50A 60W 2% pk-pk 480mV 57.6VDC72VDC GB60S48K 48V 1.25A 60W 2% pk-pk 120mV GB60S12C 12V 4.58A 55W 2% 14.4VDC18VDC pk-pk 150mV GB60S15C 15V 4.00A 60W 2% 18VDC22.5VDC pk-pk 240mV GB60S24C 24V 2.50A 60W 2% 28.8VDC36VDC pk-pk 480mV GB60S48C 48V 1.25A 60W 2% 57.6VDC72VDC pk-pk Notes: 1. * Models with 24V or higher output voltage meet efficiency requirements of Level V. 2. ** Measured with noise probe directly across output terminals, and load terminated with 0.1F ceramic and 10F low ESR capacitors. GB60 Datasheet v0921 Copyright 20 21 SL Power Electronics Corp. All rights reserved. Page 160W Single Output GB60 Family Medical & Industrial Grade INPUT OUTPUT Input Voltage and 100VAC240VAC, 47Hz63Hz, 1 rated Output Voltage See models chart Frequency 80VAC270VAC, 47Hz440Hz operational Output Power 60W continuous (55W for 12V models) Input Current 120VAC: 1.4A, 240VAC: 0.75A <2 sec. 115VAC (inversely proportional to input Turn On Time Inrush Current 240VAC, cold start: will not exceed 40A voltage and thermistor temperature) Hold-up Time Input Fuses 4A, 250VAC fuse provided on all models 16mS min. 60W load, 120VAC input Earth Leakage Current <1mA 240VAC, NC Ripple and Noise See models chart Total Load Regulation 2% Efficiency 88% typical (83% for 12V & 85% for 15V) Minimum Load Not required Switching Frequency 65kHz, typical ISOLATION Power Factor Not applicable Input-Output: 4000VAC Isolation Safety Rating Input-Ground: 1800VAC Output-Ground: 500VAC EMI/EMC COMPLIANCE Conducted Emissions EN55011/22 Class B, FCC Part 15 Class B EN55011/22 Class A, FCC Part 15 Class A PROTECTION Radiated Emissions with 6dB margin Electro-Static Discharge Overload Protection Hiccup Mode, 120%180%, typical EN61000-4-2, 6kV contact discharge, 8kV air (ESD) Immunity on Power discharge Overvoltage Protection Self-recovering Ports Short circuit Protection Hiccup Mode Radiated RF EM Fields EN61000-4-3, 3V/m 3 Susceptibility Electrical Fast Transients EN61000-4-4, 2kV/5kHz (EFT)/Bursts ENVIRONMENT Surges, Line to Line (DM) EN61000-4-5, 1kV differential, and Line to Ground (CM) 2kV common-mode Operating Temperature -10C to +70C, -40C start up Conducted RF Immunity EN61000-4-6, 3Vrms Relative Humidity 5% to 95%, non-condensing Power Frequency Magnetic EN61000-4-8, 3A/m Weight 126 grams Field Immunity 2.0 x 3.0 x 1.063 EN61000-4-11 100VAC, 95% dip/0.5 cycle Dimensions 50.8mm x 76.2mm x 27mm Voltage Dip Immunity (Criteria A), 60%/5cycles (Criteria B), 30%/25 cycles (Criteria A) Altitude Operating: 3000 meters Non-operating: 40,000ft Harmonic Current Storage Temperature -40C to +85C EN61000-3-2 Class A Emissions Random Vibration per MIL-STD-810E, Flicker Test EN61000-3-3, Complies (dmax<6%) Vibration Method514.4, Cat.1, Figure 514.4.1, 1 hour in each of 3 axes Half-sine, 40gpk, 10mS duration, in each of Shock 3 axes, 6 shocks total SAFETY Notes: 1. Specifications subject to change without notice. Safety Standards EN/CSA/IEC/UL62368-1 2. All dimensions in inches (mm), tolerance is .02. 3. Mounting holes should be grounded for EMI purpose. 4. FG is safety ground connection. 5. Specifications are for convection rating at factory settings with 115VAC input and 25C ambient unless otherwise stated. RELIABILITY 6. This power supply requires mounting on metal standoffs 0.20 (5mm) in height. 7. For Class II (no earth ground) applications, all mounting hardware must be non-conductive. MTBF Over 300,000 hours per Telcordia GB60 Datasheet v0921 Copyright 20 21 SL Power Electronics Corp. All rights reserved. Page 2