73-769-001 Artesyn Embedded Technologies

ARTESYN INTELLIGENT MP SERIES Up to 1500 Watts Advanced Energy s Artesyn iMP series is an AC input to AT A GLANCE DC output configurable power system consisting of a microprocessor-controlled PFC front end providing seven Total Power: slots that accept intelligent DC-DC converter modules with Up to 1500 W single, dual or triple outputs ranging from 2 V to 60 V. Single output modules come in four power ranges that can be Input Voltage: mixed and matched and connected in parallel or series to 85 to 264 Vac 120 to 300 Vdc obtain thousands of output combinations customized to any application. of Outputs: Optional extended hold-up module Up to 21 SPECIAL FEATURES (SEMI F47 compliance) Full medical EN60601 approval Increased power density to 50% over 2 standard MP Intelligent I C control External switching frequency sync Voltage adjustment on all outputs 2 input (manual or I C) Optional conformal coating Configurable input and output OK signals and indicators Industrial temp range (-40 C to 70 C) Configurable inhibit/enable No preload required Configurable output UP/DOWN sequencing Industrial shock/vibration (> 50Gs) Configurable current limit SAFETY (foldback or constant current) High power density (8.8 W/cu-in) UL UL60950/ES60601-1 Intelligent fan (speed control/fault CSA CSA C22.2 No. 60950-1-07/ status) CSA C22.2 No. 60601-1 Downloadable GUI from website TUV EN62368-1/EN60601-1 Customer provided air option CB Certificate and report uP controlled PFC input with active CE Mark to LVD inrush protection CCC 2 I C monitor of voltage, current, and temp Programmable voltage, current limit, 2 2021 Advanced Energy Industries, Inc. inhibit/enable through I CIMP ELECTRICAL SPECIFICATIONS Input Input ra nge 85 to 264 Vac 120 to 300 Vdc (limited to 300 Vdc in medical applications) Frequency 47 to 63 Hz (iMP1 47 to 440 Hz) Inrush current 40 A peak maximum (soft start) Efficiency Up to 85% full case load Power Factor 0.99 typ. meets EN61000-3-2 (n/a 440 Hz) Turn-on time AC on 2.0 sec typ., inhibit/enable 150 ms typical Programmable delay 50 ms internal turn-on delay (Dual Output only) EMI filter CISPR 22/EN55022 Level B** Leakage current 300 A max. 240 Vac 47 - 63 Hz Radiated EMI CISPR 22/EN55022 Level B** Holdover storage 20 ms minimum (independent of input Vac) additional 34 ms holdover storage with optional HUP module (SEMI F47 compatible). For iMP4 15 ms (low-line), 10 ms (high-line) AC OK > 5 ms early warning min. before outputs lose regulation Full cycle ride thru (50 Hz) (n/a on iMP4 > 750 W 90 Vac) Harmonic distortion Meets EN61000-3-2 Isolation Meets EN60950 and EN60601 Input to output: 4000 Vac input to ground: 1500 Vac output to ground: 400 Vdc Meets 1 MOPP Primary to ground, 2 MOPP Primary to Secondary Global inhibit / enable TTL, Logic 1 and Logic 0 configurable Input fuse (internal) iMP4: 16 A iMP8: 20 A iMP1: 25 A (both lines fused) Warranty 2 years 2 advancedenergy.com