LE150S-CD 150W Single Output LED Driver Series Features High Efficiency (up to 93%) Wide Range Universal Input 90-305 VAC Active Power Factor Correction (0.99 typical) Constant Current Output Dimming Function Lightning Protection Waterproof (IP67) Overcurrent, Overvoltage, Overtemperature Protection Meets UL8750 & EN61347 Safety 3 Year Warranty Description The LE150S-CD Series operate from a 90 ~ 305Vac input range. These units will provide up to a 1.4 A of output current and a maximum output voltage of 214Vdc for 150 W maximum output power. They are designed to be highly efficient and highly reliable. The standard features include dimming control, lightning protection, over voltage protection, short circuit protection, and over temperature protection. Model Selection Model Output Output Efficiency* Ripple & Regulation Overvoltage Number Current Voltage 110Vac 220Vac Noise** Line Load Trip Level LE150S140CD 1330mA-1470mA 53V 107V 89%-90% 91%-92% 3.2V pk-pk max. 1% 3% 128V 161V LE150S70CD 665mA-735mA 107V 214V 90%-91% 92%-93% 6.5V pk-pk max. 1% 3% 257V 321V Notes: 1. Efficiency measured at full load, at input voltage noted. 2. Measured at 20MHz bandwidth, with noise probe directly across output terminals, and load terminated with 0.1F ceramic and 10F low ESR electrolytic capacitors. General Specifications AC Input 90-305Vac, 47-63Hz, 1 Turn On Time 2.0 seconds, max. 1-10Vdc source or External Resistor can be Input Current 100Vac: 1.8A, 220Vac: 0.9A Dimming used for dimming control. See below. Function Constant Current Overload Inrush Current 230Vac, cold start: will not exceed 65A Protection Provided - no damage to unit, self-recovery. XA, 250VAC fuses provided on all models Short Circuit Input Fuses Protection Latch mode. AC input will need to be reset to Earth Leakage return to normal operation after an OVP <0.75mA 277Vac, 50Hz Overvoltage Current condition. See chart for trip range. Protection Latch mode. AC input will need to be reset To return to normal operation after an OTP Overtemperature Efficiency See Models chart. condition. Trip Temperature = 110C typical. Protection 150W continuous Output Power www.slpower.com LE150S-CD REV 2.0, 11-FEB-13 1 LE150S-CD 150W Single Output LED Driver Series General Specifications (continued) Operating Operating: -35C to +70C Ripple and Noise See chart Temperature Non-operating: -40C to +85C 10% to 100% operating Output Voltage See chart Relative Humidity 5% to 100%, non-operating UL8750, UL935, UL1012, CSA-C22.2 No. 107.1, +/- 3%. See chart Total Regulation Safety Standards EN61347-1, EN61347-2-13 340,000 hours (1400mA model, 110Vac input, Dimensions W: 3.13 x L: 9.37 x H: 1.81 MTBF 80% load, 25C ambient, per MIL-HDBK-217F). 58,000 hours (1400mA model, at 110Vac input, Weight 1500g Lifetime 80% load, 45C ambient temperature). EMI/EMC Compliance Emissions EN55015, Radiated & Conducted with 6db of margin EMI for Lighting Equipment EN61547 EN61000-4-2, 4kV Contact Discharge, 8kV air discharge Static Discharge Immunity EN61000-4-3 Radiated RF Immunity EFT/Burst Immunity EN61000-4-4 Line Surge Immunity EN61000-4-5, 2kV line-line, 4kV line-earth Conducted RF Immunity EN61000-4-6 Power Frequency Magnetic Field Immunity EN61000-4-8 Voltage Dip Immunity EN61000-4-11 EN61000-3-2 Line Harmonic Emissions Flicker Test EN61000-3-3 Derating Curves Mechanical Drawing www.slpower.com LE150S-CD REV 2.0, 11-FEB-13 2