MINT1180 180W Single Output Medical Series Features 3 x 5 x 1.3 Package 180W Convection Cooled Power Ideal for 1U Applications Class I and Class II versions Universal Input 90-264 VAC rd Approved to CSA/EN/IEC/UL60601-1, 3 Edition, 2 x MOPP Isolation nd Approved to CSA/EN/IEC/UL60950-1 2 Edition Efficiency 90% typical 3 Year Warranty RoHS Compliant Description The MINT1180 product family is the most cost-effective medically approved supply in the market with 180 watts of convection cooled output power in 3X5 footprint. The series comes in eight different models ranging from rd 12 to 48V and has been approved to IEC60601-1 3 Edition, rated for 2 MOPP (Means of Patient Protection) isolation. This new single output power supply family has both Class I and II input versions and accepts wide input range of 90 to 264Vac. The typical 90% efficiency and convection cooled make this supply an excellent solution for HomeCare applications where the use of fans is not desired. Model Selection Output Ripple & Total Model Number Volts Current* Minimum Load Noise** Regulation OVP Threshold MINT1180A1275K01 12V 15.0A 0A 120mV pk-pk 3% 14.0 1.1V MINT1180A1575K01 15V 12.0A 0A 150mV pk-pk 3% 18.5 1.2V MINT1180A1875K01 18V 10.0A 0A 180mV pk-pk 3% 21.5 2.0V MINT1180A2475K01 24V 7.50A 0A 240mV pk-pk 3% 29.0 2.5V MINT1180A2875K01 28V 6.40A 0A 280mV pk-pk 33.5 2.5V 3% MINT1180A3275K01 32V 5.62A 0A 320mV pk-pk 36.0 3.0V 3% MINT1180A4875K01 48V 3.75A 0A 480mV pk-pk 3% 56.0 3.0V Notes: * Total convection power is 180 Watts. ** Measured with noise probe directly across output terminals, and load terminated with 0.1F ceramic and 10F low ESR capacitors. General Specifications 100-240Vac, 10%, 47-63Hz, 1 Less than 3 sec. 115Vac & Full Load AC Input Turn On Time 120370Vdc Input Current 115Vac: 1.8A, 230Vac: 0.9A Hold-up Time >16mS at 180W, 120Vac www.slpower.com MINT1180 REV 1.8, 15-OCT-13 1 MINT1180 180W Single Output Medical Series General Specifications (continued) Inrush Current 264Vac, cold start: will not exceed 55A Signals N/A F1, F2: 4.00A, 250VAC fuses provided on all Overload Input Fuses 120%-150% of rating, Hiccup Mode models Protection Earth Leakage Short Circuit Provided - no damage will occur if the output is <275A 264Vac, 60Hz, NC <400A SFC shorted, auto recovery Current Protection Overvoltage OVP latch at 110%-130% of rated output Efficiency 88% typical Protection voltage. PFC: Fixed, 65kHz Switching Output Power 180W convection cooled Main Converter: Variable 35-200kHz, 65-70kHz Frequency at full load. 500S typ. for return to within 0.5% of Input-Output: 4000Vac, 2 x MOPP Transient Isolation Input-Ground: 1800Vac, 1 x MOPP nominal, 50% load step. i/t <0.2A/S. Response Output-Ground: 1500Vac Max Volt Deviation = 3% Operating -10C to +70C Ripple and Noise See chart Temperature Start Up at -40C, full load Temperature Derate output power linearly above 50C to 50% Output Voltage See chart at 70C Derating Voltage Storage Fixed output -40C to +85C Adjustability Temperature Operating: -500 to 10,000 ft. Minimum Load Not required Altitude Non-operating: -500 to 40,000 ft. Total Regulation +/- 3% combined line, load and initial setting. Relative Humidity 5% to 95%, non-condensing Operating: 0.003g/Hz, 1.5grms overall, 3 Operating: Half-sine, 20gpk, 10ms, 3 axes, 6 axes, 10 min/axis shocks total Vibration Shock Non-Operating: 0.026g/Hz, 5.0grms overall, Non-Operating: Half-sine, 40 gpk, 10 ms, 3 3 axes, 1 hr/axis axes, 6 shocks total rd EN/CSA/UL/IEC 60601-1, 3 Edition W: 3.0 x L: 5.0 x H: 1.3 Dimensions Safety Standards nd EN/CSA/UL/IEC 60950-1, 2 Edition Weight 325g MTBF 214,194 hours, 25C, 110Vac Output vs. Temperature Derating Curve 180W convection cooled, derate output power to 50% at 70C. 200 150 100 50 0 -10 0 10 20 30 40 50 60 70 Temperature (C) Convection www.slpower.com MINT1180 REV 1.8, 15-OCT-13 2 Output Power (W)