180W Single Output
MINT1180 Family
Medical Grade
FEATURES AND BENEFITS
Medical
3 x 5 x 1.3 Package 180W Convection Cooled Power
Ideal for 1U Applications Class I and Class II versions
Approved to CSA/EN/IEC/UL60601-1, 3rd Edition, 2 x
Universal Input 90-264 VAC
MOPP Isolation
Approved to CSA/EN/IEC/UL60950-1 2nd Edition Efficiency 90% typical
3 Year Warranty RoHS Compliant
MODEL SELECTION
Ripple & Total
Model Number Volts Output Current* Minimum Load OVP Threshold
Noise** Regulation
MINT1180A1275K01 12V 15.0A 0A 120mV pk-pk 3% 14.0 1.1V
MINT1180A1575K01 15V 12.0A 0A 150mV pk-pk 3% 18.5 1.2V
MINT1180A1875K01 18V 10.0A 0A 180mV pk-pk 3% 21.5 2.0V
MINT1180A2475K01 24V 7.50A 0A 240mV pk-pk 3% 29.0 2.5V
MINT1180A2875K01 28V 6.40A 0A 280mV pk-pk 3% 33.5 2.5V
MINT1180A3275K01 32V 5.62A 0A 320mV pk-pk 3% 36.0 3.0V
MINT1180A4875K01 48V 3.75A 0A 480mV pk-pk 3% 56.0 3.0V
Notes: 1. * Total convection power is 180 Watts. 2. ** Measured with noise probe directly across output terminals, and load terminated with 0.1F ceramic and 10F low ESR capacitors.
INPUT
OUTPUT
100-240Vac, 10%, 47-63Hz, 1 Output Voltage See models chart
AC Input
120370Vdc
Output Power
180W convection cooled
Input Current 115Vac: 1.8A, 230Vac: 0.9A
Turn On Time Less than 3 sec. @115Vac & Full Load
Inrush Current 264Vac, cold start: will not exceed 55A
Hold-up Time
>16mS at 180W, 120Vac
F1, F2: 4.00A, 250VAC fuses provided on all
Input Fuses
Ripple and Noise
See models chart
models
Total Regulation
+/- 3% combined line, load and initial setting.
Earth Leakage Current <275A@264Vac, 60Hz, NC; <400A SFC
PFC: Fixed, 65kHz, Main Converter: Variable 35-
Efficiency 88% typical
Switching Frequency
200kHz, 65-70kHz at full load.
Minimum Load
Not required
500S typ. for return to within 0.5% of nominal, 50%
Transient Response
load step. Di/Dt <0.2A/S. Max Volt Deviation = 3%
Voltage Adjustability
Fixed output
Page 1
MINT1500 Datasheet v0819 Copyright 2019 SL Power Electronics Corp. All rights reserved.180W Single Output
MINT1180 Family
Medical Grade
PROTECTION EMI/EMC COMPLIANCE
OVP latch at 110%-130% of rated output EN55011/22 Class B, FCC Part 15, Subpart B,
Overvoltage Protection
Conducted Emissions
voltage. Class B
EN55011/22; FCC Part 15, Class A with 6dB
Provided - no damage will occur if the output
Radiated Emissions
Margin
is
Short Circuit Protection
shorted, auto recovery
EN61000-4-2, Criteria A, 6kV Contact
Static Discharge Immunity
Discharge, 8kV air discharge
Provided, self-recovering Automatic power
Overtemperature Pr otection
shutdown at TC 135C/115C
Radiated RF Immunity EN61000-4-3, 3V/m. Criteria A
120% to 140% of current rating, Hiccup Mode
Overload Protection
EFT/Burst Immunity EN61000-4-4, 2kV/5kHz, Criteria A
EN61000-4-5, 1kV differential, 2kV common-
Line Surge Immunity
mode, Criteria A
ENVIRONMENT
Conducted RF Immunity EN61000-4-6, 3Vrms, Criteria A
Power Frequency Magnetic
-10C to +70C, Start Up at -40C, full load
Operating Temperature
EN61000-4-8, 3A/m, Criteria A
Field Immunity
5% to 95%, non-condensing
Relative Humidity
EN61000-4-11, 5% Vnom: 0.5cycle; 40% Vnom:
Voltage Dip Immunity
5 cycles, 70% Vnom: 25 cycles, Criteria A
325g
Weight
Line Harmonic Emissions EN61000-3-2, Class A, B, C, & D
W: 3.0 x L: 5.0 x H: 1.3
Dimensions
Flicker Test EN61000-3-3, Complies (dmax<6%)
Operating: -500 to 10,000 ft.
Altitude
Non-operating: -500 to 40,000 ft.
-40C to +85C
Storage Temperature
RELIABILITY
Operating: 0.003g/Hz, 1.5grms overall, 3 axes,
10 min/axis, Non-Operating: 0.026g/Hz, 5.0grms
Vibration
214,194 hours, 25C, 110Vac
MTBF
overall, 3 axes, 1 hr/axis
Operating: Half-sine, 20gpk, 10ms, 3 axes, 6 shocks
total, Non-Operating: Half-sine, 40 gpk, 10 ms, 3
Shock
SAFETY
axes, 6 shocks total
EN/CSA/UL/IEC 60601-1, 3rd Edition
Safety Standards
EN/CSA/UL/IEC 60950-1, 2nd Edition
ISOLATION
Input-Output: 4000Vac, 2 x MOPP
Isolation Input-Ground: 1800Vac, 1 x MOPP
Output-Ground: 1500Vac
Page 2
MINT1500 Datasheet v0819 Copyright 2019 SL Power Electronics Corp. All rights reserved.