MW170KB Universal 10 15 Watt Series Medical Switch-Mode Power Supply 3 Year Warranty 100-240VAC Universal Input Desktop and Wall-Plug Style with Interchangeable Blades* ( Kit sold separately) 3.3V to 24V Single Output Models, up to 15W Modified and Custom Designs Regulated Output with Low Ripple Impact-Resistant Polycarbonate Enclosure No load Power Consumption < 0.50W Designed to meet EISA Requirements (see page 3 for details). Specifications All Specifications are typical at nominal input, full load at 25C unless otherwise stated. General Specifications Output Specifications Topology Switching - Fixed Frequency Line and Load Excluding Cord Line: +/-1% Flyback Voltage Regulation Load: +/-5% Designed to meet EISA Efficiency Requirements - see page 3 Ripple 1% Vp-p max. 0.5mS for 50% Load Change, Transient Response Hold-up Time 115VAC 18mS, min. typical. Dialectric Withstand 4,000VAC or 5,656VDC Protection Overcurrent Protection Primary-Secondary (Hiccup). 1,500VAC or 2,150VDC Short Circuit Protection Primary - F.G 500VDC Secondary - F.G. Input Specifications Storage Temp. -30 C to 85 C Input Voltage Range Universal Input 100-240VAC, -10%, +10% Approvals and UL60601-1 Safety Standards IEC/EN60601-1 47-63Hz Line Frequency EMC: EN60601-1-2/ Input Current 90 VAC 0.4A, max. EN55024 Protection Internal Primary Current Fuse, MTBF 100,000 Calculated Hours Inrush Limiting Case and Desktop Style: 3.3 L x 1.81 W x 1.26 H Dimensions Environmental Specifications 84.6mm L x 46mm W x 33mm Thermal Operating Temperature 0 C to 40 C H Performance full load, no derating, Case Material Black 94V0 Polycarbonate convection cooling, Non- Cord and 18AWG, 1,800mm 2 vented case Connectors conductor. (5V, 6V model: 1,500mm). Ault 3 connector. Relative Humidity Non-condensing 5% to 95% Other connectors are available. 0 to 10,000 feet Altitude 1 of 3 SL Power Electronics Corp 6050 King Drive Ventura, CA 93003 Phone 805.486.4565 Fax 858.712.2040 Email: info slpower.com www.slpower.com MW170KB Universal 10-15 Watt Series Medical Switch Mode Power Supply 3 Year Warranty OUTPUT PARAMETERS Model Number Volts (V) Output Current (max) Max Watts Ripple (Vp-p max) MW170KB0503F01 5 V 2.00 A 10.0 W 50mV MW170KB0603F01 6 V 1.67 A 12.0 W 60mV MW170KB0903F01 9 V 1.50 A 13.5 W 90mV MW170KB1203F01 12 V 1.20 A 15.0 W 120mV MW170KB1503F01 15 V 1.00 A 15.0 W 150mV MW170KB1803F01 18 V 0.84 A 15.0 W 180mV MW170KB2403F01 24 V 0.63 A 15.12 W 240mV Note: Part numbers above include 3 output connector and IEC320 C14 grounded input receptacle. See below for other options. Model Number Key MW170 K B 05 03 F 01 Modification Designator. 01 is standared part,02 and higher denotes a modified model. Input Receptacle. See Below for options. receptacle (IEC320, C14 type, grounded) is standard. Output Connector. 03 connector is standard. See below. Other output connectors available. Contact the factory for more details Output Voltage: 05=5V, 06=6V, 09=9V, 12=12V, 15=15V, 18=18V, 24=24V, 48=48V. Design Revision Changes Manufacturing Location Product Family Input Receptacle Options DESKTOP OPTIONS WALL-PLUG OPTIONS IEC320 IEC320 IEC320 N. America N. America Europe United Australia C14 C18 C8 Japan Japan Kingdom Grounded UngroundedShave Interchangeable Fixed Fixed Fixed Fixed (F) (Q) (N) (B) (C) (M) (G) (E) Notes: 1. For Desktop options, choose the applicable letter above. 2. For Wall-plug options, choose the applicable letter above. The model will then be fitted only with the receptacle chosen. The North American blade version (B) will be an interchangeable blade. The other options (C), (M), (G), and (E), will be fixed blades molded in the case. 3. Blade Kit is available which will include one each of a EU, UK, and Aust blade. Kit part number is KT1027K . Can be used with (B) version only, to allow blades to be interchanged. 2 of 3 SL Power Electronics Corp 6050 King Drive Ventura, CA 93003 Phone 805.486.4565 Fax 858.712.2040 Email: info slpower.com www.slpower.com