120W Single Output External Power 120W Single Output External Power TE120 Family TE120 Family Industrial Grade Industrial Grade FEATURES AND BENEFITS Meets DoE efficiency level VI requirements Meets EN55011/CISPR11, FCC Part 15.109 Industrial No load input power Class B conducted & radiated emissions, Average efficiency with 6db margin Up to 120W of AC-DC power Approved to EN/IEC/UL60950-1, 2nd Edition, Am. 2 Universal input 90-264Vac input range E-cap life of >7 years IPX-2 rated enclosure for protection against liquid ingress 3 years warranty LEVEL Meets Heavy Industrial levels of EN61000 RoHS/REACH compliant VI + EMC requirements EFFICIENCY EMI & EMC MODEL SELECTION Output Output Line Load Output Cable Input 1 Volts Model Number Ripple & Noise Current Power Regulation Regulation & Connector Configuration TE120A1251F01 12.0V 10.0A 120W 120mV pk-pk 1% 5% 4 cond. 18AWG 6 pin 2 Molex Type conn. TE120A1551F01 15.0V 8.00A 120W 150mV pk-pk 1% 5% Class I Desktop, 4 cond. 18AWG IEC60320 C14 2.5 x 5.5 x 9.5mm TE120A1803F01 18.0V 6.67A 120W 180mV pk-pk 1% 5% Receptacle Straight Barrel Type conn., center positive TE120A2403F01 24.0V 5.00A 120W 240mV pk-pk 1% 5% TE120A1251N01 12.0V 10.0A 120W 120mV pk-pk 5% 1% 4 cond. 18AWG 6 pin 2 Molex Type conn. TE120A1551N01 15.0V 8.00A 120W 150mV pk-pk 1% 5% Class II Desktop, 4 cond. 18AWG IEC60320 C8 2.5 x 5.5 x 9.5mm TE120A1803N01 18.0V 6.67A 120W 180mV pk-pk 1% 5% Receptacle Straight Barrel Type conn., center positive TE120A2403N01 24.0V 5.00A 120W 240mV pk-pk 1% 5% TE120A1251Q01 12.0V 10.0A 120W 120mV pk-pk 1% 5% 4 cond. 18AWG 6 pin 2 Molex Type conn. Class II Desktop, TE120A1551Q01 15.0V 8.00A 120W 150mV pk-pk 1% 5% 4 cond. 18AWG IEC60320 C18 2.5 x 5.5 x 9.5mm TE120A1803Q01 18.0V 6.67A 120W 180mV pk-pk 1% 5% Receptacle Straight Barrel Type conn., TE120A2403Q01 24.0V 5.00A 120W center positive 240mV pk-pk 1% 5% 1. Measured at the output connector, with noise probe directly across output and load, terminated with 0.1F ceramic and 47F low ESR capacitors. Notes : 2. Molex p/n 39-01-2060 or equivalent. See outline drawing for pinout information. 3. For Input Class I models: For AC GND connected to output common (-), insert a B in the part number where the A is located (TE120B1251F01). 4. All specifications are typical at nominal input, full load, at 25C ambient unless noted. 5. Other connector options available, contact factory, or visit www.slpower.com. TE120 Family Datasheet v1019 Copyright 2019 SL Power Electronics Corp. All rights reserved. Page 1 TE120 Family Datasheet v1019 Copyright 2019 SL Power Electronics Corp. All rights reserved.120W Single Output External Power 120W Single Output External Power 120W Single Output External Power TE120 Family TE120 Family TE120 Family Industrial Grade Industrial Grade Industrial Grade INPUT OUTPUT AC Input Hold-up Time 100-240Vac, 10%, 47-63Hz, 1 20mS min., at full Load, 100Vac input Input Current Less than 1 sec 115Vac, full load 100Vac: 1.5A, 230Vac: 0.7A Turn On Time 120W continuous - See models chart for specific 264Vac, cold start: will not exceed 40A peak Inrush Current Output Power voltage model ratings F1, F2: 3.15A, 250Vac fuses (line & neutral lines) Input Fuses Output Voltage See models chart on pg 1 provided on all models Earth Leakage Current Ripple and Noise Input-GND: <500A 264Vac, 60Hz, NC See models chart on pg 1 (Input to Ground) Output-GND: <4mA 264Vac, 60Hz, NC 500s response time for return to within 0.5% of Meets US DoE efficiency level VI average efficiency final value for any 50% load step over the range of Efficiency Transient Response levels 5% to 100% of rated load, i/t< 0.2A/s. Max. voltage deviation is +/-3.5% No Load Input Power <0.210W per DoE efficiency level VI requirements PROTECTION SAFETY Will shutdown upon an over-temperature Overtemperature Safety Standards EN/CSA/UL/IEC 60950-1, 2nd Edition, Am 2 Protection condition, auto-recovery Operating: Half-sine, 20gpk, 10mS, 3 axes, 130 to 180% of rating, Hiccup Mode Overload Protection 6 shocks total Shock Non-Operating: Half-sine waveform, impact Short Circuit Hiccup Mode, auto recovery acceleration of 50G, Pulse duration of 6mS, Protection Number of shocks: 3 for each of the three axis Overvoltage 130 to 150% of output voltage (max. 60V on 48V Protection model), hiccup mode Safety Drop Test 1.4m from table top to wooden platform, 6 faces RELIABILITY >250,000 hours, full load, 110 & 220Vac MTBF input, 25C amb., per Telcordia 332 Issue 6 ISOLATION SPECIFICATION >7 year life based on calculations at 115Vac/60Hz Input - Output: 4000Vac & 230Vac/50Hz, ambient 25C at 24 hrs per day, E-Cap Life Isolation Input - Ground: 1500Vac 365 days/year, 6 power up cycles per day Output - Ground: 1500Vac (80% load on 12V model) ENVIRONMENT Operating Temperature -20C to +50C. Derate above 50C Storage Temperature -40C to +85C Temperature Derating See Derating Curve Case Temperatures are within regulatory guidelines. Power Supply unit should not be covered or enclosed to Case Temperature ensure proper heat dissipation Operating: to 5000m (derate to TBD temp. above 3000m) Altitude Non-operating: -500 to 40,000 ft. Relative Humidity 5% to 95%, non-condensing Operating: 0.003g/Hz, 1.5grms overall, 3 axes, 10 min/axis, 1-500Hz. Vibration Non-operating: random waveform, 3 minutes per axis, 3 axes and Sine waveform, Vib. Frequency/Acceleration: 10-500Hz/1g, sweep rate of 1 octave / minutes, Vibration time of 10 sweeps / axes, 3 axes W: 2.65 x L: 8.3 x H: 1.7 Dimensions W: 67.4mm x L: 212.4mm x H: 44.25mm Weight 710g All specifications are typical at nominal input, full load, at 25 C ambient unless noted. TE120 Family Datasheet v1019 Copyright 2019 SL Power Electronics Corp. All rights reserved. TE120 Family Datasheet v1019 Copyright 2019 SL Power Electronics Corp. All rights reserved. Page 2 TE120 Family Datasheet v1019 Copyright 2019 SL Power Electronics Corp. All rights reserved.