round button
Leave a message

X-On Electronics has gained recognition as a prominent supplier of D02EPB706FSTAH Standard Circular Connector across the USA, India, Europe, Australia, and various other global locations. D02EPB706FSTAH Standard Circular Connector are a product manufactured by Smiths Interconnect. We provide cost-effective solutions for Standard Circular Connector, ensuring timely deliveries around the world.

D02EPB706FSTAH Smiths Interconnect

D02EPB706FSTAH electronic component of Smiths Interconnect
Product Image X-ON
Product Image X-ON
Product Image X-ON

Images are for reference only
See Product Specifications
Part No.D02EPB706FSTAH
Manufacturer: Smiths Interconnect
Category: Standard Circular Connector
Description: Standard Circular Connector NOT AVAILABLE THROUGH MOUSER
Datasheet: D02EPB706FSTAH Datasheet (PDF)
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges



Price (USD)
50: USD 32.2677 ea
Line Total: USD 1613.38 
Availability - 0
MOQ: 50  Multiples: 50
Pack Size: 50
Availability Price Quantity
0
Ship by Fri. 27 Dec to Thu. 02 Jan
MOQ : 50
Multiples : 50
50 : USD 32.2677

   
Manufacturer
Product Category
Product Type
Contact Gender
Number of Positions
Mounting Style
Termination Style
Contact Plating
Color
Current Rating
Diameter
Housing Material
Length
Mounting Angle
Product
Shell Style
Brand
Contact Material
Cable Diameter
Housing Gender
Mating Cycles
Mating Style
Factory Pack Quantity :
Subcategory
Wire Gauge
 
Notes:- Show Stocked Products With Similar Attributes.

We are delighted to provide the D02EPB706FSTAH from our Standard Circular Connector category, at competitive rates not only in the United States, Australia, and India, but also across Europe and beyond. A long established and extensive electronic component distribution network has enhanced our global reach and dependability, ensuring cost savings through prompt deliveries worldwide. Client satisfaction is at the heart of our business, where every component counts and every customer matters. Our technical service team is ready to assist you. From product selection to after-sales support, we strive to deliver a seamless and satisfying experience. Are you ready to experience the best in electronic component distribution? Contact X-ON Electronics today and discover why X-On are a preferred choice for the D02EPB706FSTAH and other electronic components in the Standard Circular Connector category and beyond.

Image Part-Description
Stock Image D02EPB706FSTAH
Standard Circular Connector NOT AVAILABLE THROUGH MOUSER
Stock : 0
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Image Part-Description
Stock Image ASP-4
Standard Circular Connector THREADED ALUM PLUG .46X.61X.71
Stock : 2669
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image ASP-6
Standard Circular Connector THREADED ALUM PLUG .50X.76X.77
Stock : 3405
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image CBC-6
Conduit Fittings & Accessories Plastic Coaxial Cable Connector Tethered Cap. Coaxial cable cap. To fit thread size 3/8" CBC-6 Black
Stock : 0
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image CD-6
Conduit Fittings & Accessories THREADED PLASTIC CAP FOR FLARED JIC FITTINGS, RED, .53, 6 KNURLS, 9/16-18, 3/8
Stock : 23789
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image P-48
Conduit Fittings & Accessories PLAST THREADED PLUG RED .59X.56X.25
Stock : 2414
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image SC-7/16-8
Conduit Fittings & Accessories SC-7/16-8 PE-LD01 RED002
Stock : 5825
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image SEP-08
Standard Circular Connector Plastic Static Dissipative Plug for Threaded Connectors. To plug nominal thread size 12-28" SEP-08 Red
Stock : 3144
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image SEP-16
Standard Circular Connector Plastic Static Dissipative Plug for Threaded Connectors. To plug nominal thread size 1-20" SEP-16 Red
Stock : 4251
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image VC-1125-16
Conduit Fittings & Accessories ROUND VINYL CAP BLK 1.125X1.27X1.00
Stock : 1200
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image VC-1250-16
Conduit Fittings & Accessories ROUND VINYL CAP BLK 1.25X1.39X1.00
Stock : 642
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.

D Series Connectors Quick disconnect circular plastic connectors Hypertac Hyperboloid Technology Smiths Interconnect offers an extensive range of superior contact technologies suitable for standard and custom solutions. Hypertac (HYPERboloid conTACt) is the original superior performing hyperboloid contact technology designed for use in all applications and in harsh and demanding environments where high reliability and safety are critical. The inherent electrical and mechanical characteristics of the Hypertac hyperboloid contact ensures unrivalled performance in terms of reliability, number of mating cycles, low contact force and minimal contact resistance. The contact sleeve is formed by wires, in a hyperboloid geometry, which align themselves elastically as contact lines around the pin, providing a number of linear contact paths. Features Benefits Low insertion/extraction forces High density interconnect systems The angle of the socket wires allows tight control of the Significant reductions in size and weight of sub-system pin insertion and extraction forces. The spring wires are designs. No additional hardware is required to overcome smoothly deflected to make line contact with the pin. mating and un-mating forces. Long contact life Low cost of ownership The smooth and light wiping action minimizes wear on the The Hypertac contact technology will surpass most product contact surfaces. Contacts perform up to 100,000 insertion/ requirements, thus eliminating the burden and cost of having extraction cycles with minimal degradation in performance. to replace the connector or the entire subsystem. Lower contact resistance Low power consumption The design provides a far greater contact area and the wiping The lower contact resistance of our technology results in a action of the wires insures a clean and polished contact lower voltage drop across the connector reducing the power surface. Our contact technology has about half consumption and heat generation within the system. the resistance of conventional contact designs. Higher current ratings Maximum contact performance The design parameters of the contact (e.g., the number, The lower contact resistance of the Hypertac contact reduces diameter and angle of the wires) may be modified for any heat build-up; therefore Hypertac contacts are able to handle requirement. The number of wires can be increased so the far greater current in smaller contact assemblies without the contact area is distributed over a larger surface. Thus, the detrimental effects of high temperature. high current carried by each wire because of its intimate line contact, can be multiplied many times. Immunity to shock & vibration Reliability under harsh environments The low mass and resultant low inertia of the wires enable Harsh environmental conditions require connectors that them to follow the most abrupt or extreme excursions of will sustain their electrical integrity even under the most the pin without loss of contact. The contact area extends demanding conditions such as shock and vibration. The 360 around the pin and is uniform over its entire length. Hypertac contact provides unmatched stability in demanding The 3 dimensional symmetry of the Hypertac contact design environments when failure is not an option. guarantees electrical continuity in all circumstances. 2

Tariff Desc

8536.69.10 62 Plugs and sockets for co-axial cables or printed circuits Free

8536.69.90 CONNECTORS, ELECTRICAL, being ANY of the following:
(a) plugs;
(b) sockets;
(c) adaptors
TC 1225594

8536.69.90 PLUG AND SOCKET COMBINATIONS, being ANY of the following:
(a) 2, 3, 4, 6, 9, 12 OR 15 way, rated to 300 V, maximum current of 15 amps;
(b) 2, 3 OR 12 way, single in line pin header;
(c) 1.3mm plug to 2.1mm socket;
(d) 2.5mm plug to 3.5mm socket
TC 9900931

8536.69.90 SOCKETS, being ANY of the following:
(a) single pin, NOT exceeding 3.5 mm;
(b) micro, single pin, 2 mm;
(c) DC power connector, 2.1 mm OR 2.5 mm;
(d) 9 pin OR 15 pin, sub D;
(e) 2, 4 OR 8 pole microphone connector;
(f) 2, 3, 5, 6, 7, 8 OR 13 pin DIN;
(g) 16, 20, 26, 34, 40 OR 50 way dual in line crimp-on
TC 9900883

8536.69 JACKS, phono, RCA Type
TC 8438480

8536.69.90 CONNECTORS, electrical, incorporating twist locking mechanism
TC 9703905

8536.70.90 CONNECTORS, OPTICAL Op. 12.06.2007 FIBRE
TC 0708845

8536.69 PLUGS, modular, telephone, to suit RJ 11 sockets and complying with US Standard FCC 68
TC 9203687

8536.90.90 LUGS, being solderable, copper connectors
TC 0613954

8535.90.00 CRIMPING TERMINALS, having bell-mouth OR flared cable entry
TC 9504891

8536.90 HOLDERS, dry cell
TC 8438464

8536.69.90 TC 1440896 POWER POINTS, plastic AND/OR metal, single OR multiple power outlet, with OR without EITHER of the following:
(a) LED (light-emitting diode) night light;
(b) single OR multiple power switches

8536.69 PLUGS/SOCKETS, adaptor being EITHER of the following:
(a) providing for plug or socket configurations used in other countries to connect to Australian standard plugs or sockets;
(b) providing for plug or socket configurations of Australian standard type to connect to plugs or sockets used in other countries
TC 8807068
Smiths Connectors IDI
Smiths Connectors / IDI
Smiths Interconnect
smiths interconnect / hypertac
Smiths Interconnect / IDI
T106-26 Ferrite Toroids by Micrometals: An In-Depth Overview image

Dec 6, 2024
Xon Electronics offers the T106-26 Ferrite Toroids / Ferrite Rings by Micrometals, available in the USA, India, Australia, Europe, and other regions. This high-quality toroidal ferrite features precise dimensions: length 11.1mm, inner diameter 14.5mm, outer diameter 26.9mm, and an inductance of 93n
Best Supplier of XT60H-F and XT60H-M Plugs by Amass image

Jul 19, 2024
finding a reliable supplier is crucial for maintaining the quality and performance of your projects. Xon Electronic has established itself as the premier supplier of XT60H-F and XT60H-M plugs , manufactured by Amass. With a presence in the USA, India, Australia, Europe, and other countries, Xon E
Trusted Retailer for 7F32000E06UCG SMD Crystal Resonators by SJK image

Nov 8, 2024
The 7F32000E06UCG SMD Crystal Resonator by SJK is a high-precision component ideal for applications needing stable timing, such as microcontroller clocks, communication modules, and consumer electronics. Packaged in a compact SMD-2016_4P format, it offers excellent frequency tolerance (±10 ppm) a
2EHDRC-03P Pluggable Terminal Blocks In India, USA, Australia image

Oct 21, 2024
The 2EHDRC-03P Pluggable Terminal Block , manufactured by Dinkle and distributed by Xon Electronic , is a versatile solution for industrial automation, power distribution, and control systems. This 3-way closed-end header terminal block features a right-angle design with a 5.08 mm pitch , en

Looking for help? Visit our FAQ's Section to answer to all your questions

 

X-ON Worldwide Electronics

Welcome To X-ON Electronics
For over three decades, we have been advocating and shaping the electronic components industry. Our management complements our worldwide business scope and focus. We are committed to innovation, backed by a strong business foundation. If you need a trustworthy supplier of electronic components for your business – look no further.
 

Copyright ©2024  X-ON Electronics Services. All rights reserved.
Please ensure you have read and understood our Terms & Conditions before purchasing. All prices exclude GST.

Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted AS9120 Certified
Cookie Notice
Our website utilizes essential cookies to guarantee that it works properly, and optional analytics cookies to provide you with a better browsing experience. To learn more, read our Cookie Notice
a