LAN9500/LAN9500i
LAN9500A/LAN9500Ai
USB 2.0 to 10/100 Ethernet Controller
Datasheet
PRODUCT FEATURES
Flexible address filtering modes
Highlights
One 48-bit perfect address
Single Chip Hi-Speed USB 2.0 to 10/100 Ethernet
64 hash-filtered multicast addresses
Controller
Pass all multicast
Integrated 10/100 Ethernet MAC with Full-Duplex
Promiscuous mode
Support Inverse filtering
Pass all incoming with status report
Integrated 10/100 Ethernet PHY with HP Auto-MDIX
Wakeup packet support
support
Integrated Ethernet PHY
Integrated USB 2.0 Hi-Speed Device Controller
Auto-negotiation
Integrated USB 2.0 Hi-Speed PHY Automatic polarity detection and correction
HP Auto-MDIX support
Implements Reduced Power Operating Modes
Link status change wake-up detection
Target Applications
Support for 3 status LEDs
External MII and Turbo MII support HomePNA and
Embedded Systems
HomePlug PHY
Set-Top Boxes
Power and I/Os
PVRs
Various low power modes
1
CE Devices
NetDetach feature increases battery life
1
Supports PCI-like PME wake
Networked Printers
11 GPIOs
USB Port Replicators
Supports bus-powered and self-powered operation
Standalone USB to Ethernet Dongles
Integrated power-on reset circuit
Test Instrumentation Single external 3.3v I/O supply
Internal core regulator
Industrial
Miscellaneous Features
Key Features
EEPROM Controller
1
USB Device Controller
Supports custom operation without EEPROM
Fully compliant with Hi-Speed Universal Serial Bus
IEEE 1149.1 (JTAG) Boundary Scan
Specification Revision 2.0
Requires single 25 MHz crystal
Supports HS (480 Mbps) and FS (12 Mbps) modes
Software
Four endpoints supported
Windows XP/Vista Driver
Supports vendor specific commands
Linux Driver
Integrated USB 2.0 PHY
Win CE Driver
Remote wakeup supported
MAC OS Driver
High-Performance 10/100 Ethernet Controller
EEPROM Utility
Fully compliant with IEEE802.3/802.3u
Packaging
Integrated Ethernet MAC and PHY
56-pin QFN (8x8 mm) Lead-Free RoHS Compliant
10BASE-T and 100BASE-TX support
Environmental
Full- and half-duplex support
Commercial Temperature Range (0C to +70C)
Full- and half-duplex flow control
Industrial Temperature Range (-40C to +85C)
Preamble generation and removal
Automatic 32-bit CRC generation and checking
Automatic payload padding and pad removal
Loop-back modes
TCP/UDP/IP/ICMP checksum offload support
1
= LAN9500A/LAN9500Ai only
SMSC LAN950x Family Revision 1.1 (04-18-13)
DATASHEETUSB 2.0 to 10/100 Ethernet Controller
Datasheet
Order Numbers:
LAN9500-ABZJ (Tray) for 56-pin, QFN lead-free RoHS compliant package (0 to +70C temp range)
LAN9500-ABZJ-TR (Tape & Reel) for 56-pin, QFN lead-free RoHS compliant package (0 to +70C temp range)
LAN9500i-ABZJ (Tray) for 56-pin, QFN lead-free RoHS compliant package (-40 to +85C temp range)
LAN9500i-ABZJ-TR (Tape & Reel) for 56-pin, QFN lead-free RoHS compliant package (-40 to +85C temp range)
LAN9500A-ABZJ (Tray) for 56-pin, QFN lead-free RoHS compliant package (0 to +70C temp range)
LAN9500A-ABZJ-TR (Tape & Reel) for 56-pin, QFN lead-free RoHS compliant package (0 to +70C temp range)
LAN9500Ai-ABZJ (Tray) for 56-pin, QFN lead-free RoHS compliant package (-40 to +85C temp range)
LAN9500Ai-ABZJ-TR (Tape & Reel) for 56-pin, QFN lead-free RoHS compliant package (-40 to +85C temp range)
This product meets the halogen maximum concentration values per IEC61249-2-21
For RoHS compliance and environmental information, please visit www.smsc.com/rohs
Please contact your SMSC sales representative for additional documentation related to this product
such as application notes, anomaly sheets, and design guidelines.
Copyright 2013 SMSC or its subsidiaries. All rights reserved.
Circuit diagrams and other information relating to SMSC products are included as a means of illustrating typical applications. Consequently, complete information sufficient for
construction purposes is not necessarily given. Although the information has been checked and is believed to be accurate, no responsibility is assumed for inaccuracies. SMSC
reserves the right to make changes to specifications and product descriptions at any time without notice. Contact your local SMSC sales office to obtain the latest specifications
before placing your product order. The provision of this information does not convey to the purchaser of the described semiconductor devices any licenses under any patent
rights or other intellectual property rights of SMSC or others. All sales are expressly conditional on your agreement to the terms and conditions of the most recently dated
version of SMSC's standard Terms of Sale Agreement dated before the date of your order (theTerms of Sale Agreemen). The product may contain design defects or errors
known as anomalies which may cause the product's functions to deviate from published specifications. Anomaly sheets are available upon request. SMSC products are not
designed, intended, authorized or warranted for use in any life support or other application where product failure could cause or contribute to personal injury or severe property
damage. Any and all such uses without prior written approval of an Officer of SMSC and further testing and/or modification will be fully at the risk of the customer. Copies of
this document or other SMSC literature, as well as the Terms of Sale Agreement, may be obtained by visiting SMSCs website at