1 PRODUKTKATALOG - STEGO TECHNICAL DATASHEET FILTER FAN PLUS FPI/FPO 92 x 92 mm > New air-flap outlet technology for > Two systems for optimal airflow high airflow (FPI/FPO) > Easy mounting > Standard enclosure cut-out sizes > Protection type test/Environmental (5 sizes) rating by independent testing institutes > One filter mat (VDE and UL) Filter fans are used to provide an optimum climate in enclosures and cabinets with electrical/electronic components. The interior temperature of an enclosure can be reduced by channelling cooler filtered outside air into the enclosure thus expelling heated internal air. The resulting airflow prevents formation of localised hot pockets in installations and protects electronic components from overheating. The Filter Fan Plus series uses a new air-flap outlet technology for the air outlet and thus reaches a high degree of airflow. A ratchet mechanism is used for mounting and provides high stability and tightness. Depending on the application there are two systems that are available the FPI or FPO system. The FPI system is a standard installation with a filter fan in the lower part of the enclosure which ensures that fresh air is fed into the enclosure (airflow directionI). This system consists of a filter fan and exit filter. Whereas in the FPO system, the filter fan is located in the upper area of the enclosure to avoid heat buildups (airflow directionOu). The FPO system is composed of an intake filter and exit filter fan. The Filter Fan Plus series has been designed for indoor use. TECHNICAL DATA Axial fan, ball bearing service life L10 at +40 C (+104 F): min. 50,000 h fan body aluminium, rotor metal Connection 2 stranded wires, 300 mm Casing, hood, flaps plastic according to UL94 V-0, light grey UV light resistant according to UL746C (f1) SYSTEM FPI Enclosure cut-out 92 x 92 mm Mounting frame 4 built-in ratchet braces for mounting Air outlet (6 notches for wall thickness 1 4 mm). through flaps 1 Additional use of screws possible if needed . Filter mat G3 acc. to DIN EN 779, average arrestance A 84 % a Filter material synthetic fibre with progressive construction, temperature resistant to +100 C, self-extinguishing class F1, moisture resistant to 100 % RH, reusable Operating/Storage temperature -40 to +70 C (-40 to +158 F) Air intake Operating/Storage humidity max. 90 % RH (non-condensing) through filter mat Protection type/Protection class IP54 / I (earthed) with fan Environmental rating UL/NEMA UL TYPE 12 / NEMA 12 Approvals VDE, UL File No. E234324, EAC Note other voltages on request 1 Drilling marks for screw mounting are indicated on mounting frame. AIRFLOW DIRECTIONI: FILTER FAN FPI 018 Art. No. Operating voltage Air volume, Air volume Current consumption Power Average noise level Depth in Weight Filter mat free flow with exit filter (50/60 Hz) consumption (DIN EN ISO 4871) enclosure (approx.) 01870.0-30 AC 230 V, 50/60 Hz 19 m/h 13 m/h 70 mA 12 W 39 dB 66 mm 0.6 kg G3 01870.9-30 AC 115 V, 50/60 Hz 23 m/h 16 m/h 115 mA 11 W 43 dB 66 mm 0.6 kg G3 AIRFLOW DIRECTIONI: EXIT FILTER FPI 118 Art. No. Depth in enclosure Weight (approx.) Air outlet 11870.0-00 29 mm 0.2 kg air-flap outlet technology cold warm 15.10.2015 Specifications are subject to change without notice. Errors and omissions excepted. Suitability of this product for its intended use and any associated risks must be determined by the end customer/buyer in its final application. www.stego.de www.stego.co.uk www.stegonorden.se2 2 PRODUKTKATALOG - STEGO TETECHNICCHNICAL DAL DAATTASHEETASHEET SYSTEM FPO Air outlet through flaps with fan Air intake through filter mat AIRFLOW DIRECTIONOU: FILTER FAN FPO 018 Operating voltage Air volume, Air volume Current consumption Power Average noise level Depth in Weight air outlet Art. No. free flow with exit filter (50/60 Hz) consumption (DIN EN ISO 4871) enclosure (approx.) 01880.0-00 AC 230 V, 50/60 Hz 24 m/h 15 m/h 70 mA 12 W 38 dB 72 mm 0.6 kg air-flaps 01880.9-00 AC 115 V, 50/60 Hz 32 m/h 19 m/h 115 mA 12 W 41 dB 72 mm 0.6 kg air-flaps AIRFLOW DIRECTIONOU: INTAKE FILTER FPO 118 Art. No. Depth in enclosure Weight (approx.) Filter mat 11880.0-30 22 mm 0.2 kg G3 acc. to DIN EN 779, average arrestance A 84 % a FILTER MAT FM 086 Filter class 84 x 84 mm Average arrestance A 1 packing unit a G3 acc. to DIN EN 779 Art. No. 08633.0-00 84 % 5 pieces TECHNICAL DRAWINGS 120 72 22 120 66 22 29 22 22 22 FPI 018 FPI 118 FPO 018 FPO 118 cold warm 92 92 92 92 15.10.2015 Specifications are subject to change without notice. Errors and omissions excepted. Suitability of this product for its intended use and any associated risks must be determined by the end customer/buyer in its final application. www.stego.de www.stego.co.uk www.stegonorden.se