WALL MOUNTED ELECTROMAGNETIC FIRE DOOR HOLDERS INTEGRAL PART OF ANY FIRE ALARM SYSTEM 24VDC OR 230VAC SUPPLY VOLTAGE ZERO RESIDUAL FORCE 200N - 500N HOLDING FORCE FIRE RESISTANT ABS CASING APPROVED TO EN1155 AND CE MARKED IP 51 PROTECTION HIGH QUALITY COST EFFECTIVE PACKAGE INCLUDES FITTING INSTRUCTIONS Electromagnetic Fire Door Holders are designed to hold open Fire Doors in any areas where easy access is essential, and can be used in conjunction with any suitable fire alarm systems. Automatic Fire Manual When an alarm is triggered, power to the door holder is cut, Detector Alarm allowing the fire door fitted with its standard closing mechanism, to shut automatically. Type 87 door holders are fitted with an integral manual release button, allowing the door to be closed without operating the fire alarm. The Type 87 door holder is surface mounted, and is housed in a white Fire resistant ABS casing. Type tested to meet EN1155, knockouts for surface or back cable entry, and a spring loaded pin to give zero residual holding force when de-energised. Fire Alarm The 230Vac unit includes a filter for EMC emissions and is CE Control Unit marked. Internal diodes dissipate any back EMF on switch-off, reducing wear at the control unit. The Type 87 is ideal for use in any public access areas including Hospitals, Offices, Hotels and Nursing Homes. Also available as shown below in a decorative finish. Fire Alarm Siren Electromagnetic Fire Door Holder High Etherley, Bishop Auckland, Co. Durham, England, DL14 OHY Tel: +44 (0) 1388 832 252 Fax: +44 (0) 1388 834 220 INNOVATORS OF FIRE SECURITY E-mail: info geofire.co.uk Web: www.geofire.co.uk A Stephenson Gobin Group Company. - Data Sheet No. 3-87-0901 - Issue 2/04 Geofire reserve the right to change the specifications in this data sheet without prior notification43 THE TYPE 87 - WALL MOUNTED ELECTROMAGNETIC FIRE DOOR HOLDERS Knockouts TECHNICAL INFORMATION Dia. 20 mm Voltage 24Vd.c. or 230a.c. Holding Force 200N or 500N Power Rating 1.15W Residual Holding force Zero 2 - Slots on 80 PCD Ambient Temperature 0 - 40C 46.0 87.0 2 - Slots on 60 PCD Protection IP 51 Fuse 20 mm / 500 mA Casing White Fire-Resnt ABS Weight 360g ORDER CODE : 200N : 87-0351 (24 Vdc) . 87-0352 (230 Vac) 500N : 87-0551 (24 Vdc) Manual Release Button 4 - Slots on 50.8 PCD TYPE 87 FLOOR KEEPER PLATES: TYPE 87 STAND MOUNTING BRACKET 10 100 4 - Holes Dia. 5.0 on 54.0 PCD 3 - Holes on 50.8 PCD 3 - Holes 20 38.5 51.0 26.5 50 76.0 CHAIN KEEPER 3 - Holes 5.0 105 MOUNTING PLATE KEEPER PLATE on 36.0 PCD 57 4 - Holes Dia. 5.3 4.0 4.0 1m Chain Supplied Dia. 47.6 50.0 75.5 13.0 13.0 Item Name Order code H1 ACCESSORIES Type 87 Stand 87-3020 200 Each type 87 is supplied with an adjustable 87-3030 300 keeper plate as standard. All other accessories 87-3050 500 should be sold seperately. Type 87 Chained Type 87 F.M. Bracket 34-035E n/a Keeper Plates can be used where the standard Chain Keeper 31-0308 n/a keeper plate will not reach the door holder due to the door being positioned further towards Keeper Plates Holding Force Adjustment Order Code the centre of the wall. Low Profile 200N 15 2-31-0306-Z231 Adjustable 200N 45 2-31-0310-U003 Sprung 500N 15 2-31-0507-Z003 Adjustable 500N 45 2-31-0507-N001 Low Profile 500N 15 2-31-0507-N002 Data Sheet No. 3-87-0902 Issue 2/04 45 ADJUSTABLE SPRUNG LOW PROFILE (Supplied as standard) 51.0 TYPE 87 ASSEMBLY 95.0 75.0 H1 6 105 28 Dia. 47.6