ANT-1-6-ST25DV STMicroelectronics

ANT-1-6-ST25DV Antenna reference boards for ST25DV04K dual interface EEPROM Data brief Description The ANT-1-6-ST25DV antenna reference kit is a ready-to-use kit containing two boards, each of them featuring a ST25DV04K Dual Interface EEPROM IC connected to an RF etched antenna 2 on one side, and to an I C bus on the other side. The ANT-1-6-ST25DV antenna kit allows system designers to evaluate the ST25DV04K performance, capabilities, and to get started with their design. To demonstrate the energy harvesting function, the ANT-1-6-ST25DV can be used in conjunction Features with the DEMO-CR95HF-A demonstration board. Ready-to-use printed circuit board (PCB) The ANT-1-6-ST25DV PCB files can be including: downloaded from www.st.com. 45 mm x 75 mm (ST25DV Discovery ANT C1) and 18 mm x 24 mm (ST25DV Discovery ANT C6), 13.56 MHz single layer inductive antenna etched on the PCB ST25DV04K dual interface EEPROM Mates with ST25Dx DISCOVERY MBOARD connector Energy harvesting output (V ) with a OUT 10 nF capacitance filtering circuit Figure 1. Functional block diagram )LOWHULQJ 9(+ 9 /3 287 FLUFXLW *32 67 9 . & 6&/ , & & 6 06Y 9 November 2017 DocID029578 Rev 3 1/6 www.st.comAssociated PC software ANT-1-6-ST25DV 1 Associated PC software The ANT-1-6-ST25DV kit is supported by the PC software and by the Dual Interface EEPROM tool that allows to configure and control the energy harvesting. This software is available on www.st.com. 2/6 DocID029578 Rev 3